Audited Supplier
| Equipment performance and main parameters | |
| Equipment operating cycle | 15seconds |
| Equipment operator | 7 person |
| Estimated daily production (calculated based on 10 hours) | 2400 sets |
| Estimated monthly production (calculated on a 24 day basis) | 57600 sets |
| Equipment noise | ≤75db |
| Overall production line net size | Length 10000mm * Width 1100mm * Height 2000mm |
| Power supply standards | AC 220V,50HZ |
| Gas supply methods and standards | Seamless steel pipe segmented supply, 0.5~0.8Mp |
| Main standard component brand configuration | |
| Pneumatic components | SMC |
| Sensor | Panasonic |
| Programmable logic controller | Mitsubishi |
| Touch panel | WEINVIEW |
Composition: Welding machine, motor, cylinder, camera
Action description:
Manually place the product and FILTER onto the product carrier, press the start button with both hands, and move the product carrier to the welding station. After welding is completed, move it to the testing station. Manually transfer the qualified products to the next station, and place the unqualified products in the defective product box.
Action description:
Manually assemble HOLDER, CORE, and O-RING, and place the assembled products onto the product transfer carrier.
Composition: Camera
Action description:
Manually assemble the PLUNGER, place it on the product carrier after assembly, and press the start button with both hands for height detection. If the test is qualified, manually remove and place it on a transfer carrier; If the test fails, manually remove and place it in the defective product box.
Composition: motor, press, laser engraving, barcode scanner, cylinder
Action description:
Manually assemble the CASE, place it on the product carrier after assembly, press the start button with both hands, and move the product to the laser engraving position for laser engraving of the QR code. After engraving, move it to the scanning gun position for inspection. If the inspection is qualified, move it to the bottom of the press for pressing fitting. After completion, return to the origin and manually take it out and place it in the transfer placement seat; If the inspection fails, return directly to the origin and manually remove and place it in the defective box.
Composition: Vibration disk, cylinder, screw gun
Action description:
Manually place the product into the product carrier and press the start button. After positioning the product, move it to the O-RING installation station to automatically assemble the O-RING. After completion, move it to the origin and manually pre install the SCREW. Place it on the product carrier and press the start button. After positioning the product, move it to the SCREW tightening station for tightening. After completion, return to the origin, manually remove and place the qualified product in the transfer storage seat, and place the unqualified product in the defective product box.
Composition: cylinder, resistance meter, voltage tester, airtightness tester
Action description:
Manually place the product onto the product carrier and press the start button. The equipment will undergo resistance and voltage resistance tests in sequence. After completion, it will be manually placed at the airtightness testing station for airtightness testing. If the test is qualified, manually remove and place it on a transfer carrier; If the test fails, manually remove and place it in the defective product box.
Composition: cylinder, displacement sensor
Action description:
Manually place the product onto the product carrier, insert it into the slot clamp, and press the start button. The device automatically presses into the slot clamp and performs height detection. If the inspection is qualified, manually remove and place it in the product tray; If the test fails, manually remove and place it in the defective product box.
Composition: Motor
Action description:
Manually control the lifting machine through buttons to keep the material tray at an appropriate height, making it convenient for personnel to place products.
GOTOP -industrial manufacturing automation solutions.
GOTOP always focus on auto parts and motor industry manufacturing automation solutions, whether it is production process automation or production process information systems GOTOP professional technology, provide core technical support to customers.
GOTOP has 59 patents including 7 invention patents (included in the audit) it has passed the National high-tech Enterprise certification the ISO Quality Management System certification the new professional certification, and the certification of small and medium-sized sci-tech enterprises in Shandong province.
GOTOP adheres to the principle of integrity and gratefulness follows the concept of high quality and customer first, accumulates experience constantly enhances r & D strength and creates a bright future with each partner hand in hand!
The competitiveness of the company
research and development:
• Rigorous evaluation and necessary experimental verification
• Build a professional project team
• Continuous improvement in engineering design, Modular rocket
• Keep up-to-date with project progress and feedback
Quality:
• Internal and external design review
• Implement PDCA for material inspection
• Gotop internal acceptance and customer pre-acceptance
• 1 year or above quality assurance
Manufacturing:
• Decompose the assembly process to make it more detailed
• Review the problem every day and make timely improvement
• Unified standard operating procedures and practices
• Implementation of PDCA
Services:
• Technical training
• Long-term free technical support from strategic partners
• Transfer of information and documents
