Audited Supplier
Jaw crusher contains frame, eccentric shaft, big belt pulley, flywheel, side guard plate, toggle plate, back seat of toggle plate,clearance adjustable screw, reset spring, fixed jaw and movable jaw, etc. and among them the toggle plate also has insurance effect.The crushing way of this series jaw crushers is curve extruding. The motor-driven belt and belt pulley drive the removable jaw plate up and down through eccentric shaft.When the movable jaw plate moves up, the angle between the toggle plate and the movable jaw plate gets larger, which pushes the movable jaw plate close to the fixed jaw plate and in this procedure the materials have been squeezed, rubbed and ground; while the movable jaw plate moves down, the angle between the toggle plate and the movable jaw plate gets smaller, the movable jaw plate leaves the fixed jaw plate with forces from the pull rod and the springs and this time the ground materials will be discharged from the bottom opening of the grinding cavity. With periodic crushing and discharge of the movable plate driven by the motor,volume production is completed.
| Model | Feed port size(mm) | Maximum feed length(mm) | Outlet size(mm) | Capacity(t/h) | Motor power(kw) | Dimensions(mm) | Weight(t) |
| PE150*250 | 150*250 | 125 | 10-40 | 1-3 | 5.5 | 896*745*935 | 0.8 |
| PE200*350 | 200*350 | 180 | 15-50 | 1-6 | 11 | 996*800*760 | 1.2 |
| PE250*400 | 250*400 | 200 | 20-50 | 5-20 | 15 | 1430*1310*1340 | 3 |
| PE400*600 | 400*600 | 350 | 40-100 | 15-60 | 30-37 | 1700*1732*1653 | 7 |
| PE500*750 | 500*750 | 425 | 50-100 | 50-100 | 45-55 | 2035*1921*2000 | 12 |
| PE600*900 | 600*900 | 480 | 65-165 | 60-130 | 55-75 | 2290*2206*2370 | 17 |
| PE750*1060 | 750*1060 | 630 | 80-140 | 80-180 | 90-110 | 2655*2302*3110 | 29 |
| PE900*1200 | 900*1200 | 750 | 95-165 | 140-260 | 110-132 | 3789*2826*3025 | 58 |
| PE1000*1200 | 1000*1200 | 850 | 195-265 | 280-560 | 132-160 | 5350*4280*3050 | 69 |
| PE1200*1500 | 1200*1500 | 1020 | 150-300 | 400-800 | 160-220 | 6380*5310*3710 | 100.9 |
| PEX150*750 | 150*750 | 125 | 18-50 | 5-16 | 15 | 896*745*935 | 3.8 |
| PEX250*750 | 250*750 | 210 | 25-60 | 15-30 | 22-30 | 1667*1545*1020 | 5 |
| PEX250*1000 | 250*1000 | 210 | 25-60 | 15-50 | 30-37 | 1550*1964*1380 | 7 |
| PEX250*1200 | 250*1200 | 210 | 25-60 | 20-60 | 37-45 | 2192*1900*1950 | 8.5 |
| PEX300*1300 | 300*1300 | 250 | 20-90 | 16-105 | 55 | 2720*1950*1600 | 15.6 |
Pre-sale:
(1) device model choice.
(2) According to customer's special requirements, design and manufacture of products.
(3) training technical personnel for clients.
(4) the company free of charge to the user on-site engineering and technical personnel planning site for the user to design the best processes and programs.
Sale:
(1) product acceptance.
(2) to help customers develop construction programs.
After-sale:
(1) free to assign a dedicated service personnel, arrived at the scene and guide customers installation.
(2) equipment installation.
(3) on-site training of operators.
(4) complete sets of equipment installed, 1-2 full-time technical staff to stay to help customers on-site production of 1 month, until the user satisfaction.
