Audited Supplier
Cone crusher is suitable to crush various kinds of ores and rocks of medium or above medium hardness,and cone crusher is of stable structure, high efficiency, easy adjustment,and use economically, etc. The spring safety system of crusher acts as an overloading protection system that allows metals to pass through the crushing chamber so as not to damage the cone crusher. The safety system uses dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separated to make surereliable pertormance. The type of crushing chamber depends upon the size of feeding and fineness of the crushed product. The standard type(PYB) is applied to medium crushing,the medium type is applied to medium or fine crushing and the short head type is applied to fine crushing.
Working Principle
Spring Cone crusher crushes materials by the working surface between the movable cone and fixed cone. The movable cone of the cone crusher is supported by spherical bearing and fixed on an hanging erect shaft which is set in the eccentric sleeve, and the sleeve is set on the stopping and pushing bearing. The movable cone and erect shaft are derived by the eccentric shaft sleeve together.The eccentric shaft sleeve is driven by horizontal shaft and fabricated gear, and the wheel of the conveyor belt is derived by motor through v-belts.
The lower part of vertical shaft is installed in the eccentric sleeve. When the eccentric sleeve of cone crusher rotates, there is a conical surface lined out by the shaft. When the movable cone comes near the fixed cone, rocks are grinded into pieces, when the cone leaves, grinded materials is discharged from the discharge hole. The fixed cone can beascended or descended by adjusting setting to adjust the width of discharge hole, consequently the output size is determined.
Advantage
1. The structure is classic, suitable for various working conditions and environments, and the equipment performance is stable and reliable.
2. The finished product is cubic in shape, with good particle size, meeting the demand for high-quality aggregates.
3. Replaceable cavity type, multi-purpose for one machine, meeting different process requirements for medium and fine crushing.
4. Utilizing a spring safety system with overload protection mechanism, it is easy to disassemble and maintain.
5. Adopting dual sealing protection of dry oil and water to extend bearing life.
Production LineThe material is first transported to the jaw crusher evenly and continuously through the vibrating feeder. After being crushed by the jaw crusher, it is conveyed to the impact crusher for secondary crushing. After the secondary crushing, the material is conveyed to the vibrating screen.During normal operation, thevibartion of exciter will drive the screen mesh fixed on the screen box vibrate, and then materials will be screened. The big and small materials fall from the upper side and lower side to the screen to get them separated.
If you would like a quote for the entire line, please click here to contact us.
Our stone cone crusher can greatly reduce the operating costs. And it is of reliability and flexibility. Cone crusher is widely used for crushing various materials like stone, granite, trap rock, coke, coal,manganese ore, iron ore, emery, fused aluminum, oxide,fused calcium carbide, lime stone, quartz, alloys. This series of cone crusher makes a feature of great crushing ratio,uniform size of fineness ,easy maintenance and less operating cost. And the cone crusher is widely used in mining, metallurgical industry,building material, highway and chemical industry.
Technical Parameter
| Model | Crush Cone diameter | Size of feeder opening | Max feeding size | Discharge adjustment range | Capacity | Eccentric rotate speed | Power | Weight |
| PYB600 | 600 | 75 | 12-25 | 65 | 40 | 356 | 30 | 5 |
| PYD600 | 600 | 40 | 2-13 | 35 | 12-23 | 356 | 30 | 5.5 |
| PYB900 | 900 | 135 | 15-50 | 115 | 50-90 | 333 | 55 | 11.2 |
| PYZ900 | 900 | 70 | 5-20 | 60 | 20-65 | 333 | 55 | 11.2 |
| PYD900 | 900 | 50 | 3-13 | 50 | 15-50 | 333 | 55 | 11.3 |
| PYB1200 | 1200 | 170 | 20-50 | 145 | 110-168 | 300 | 110 | 24.7 |
| PYZ1200 | 1200 | 115 | 8-25 | 100 | 42-135 | 300 | 110 | 25 |
| PYD1200 | 1200 | 60 | 3-15 | 50 | 18-105 | 300 | 100 | 25.3 |
| PYB1750 | 1700 | 250 | 25-50 | 215 | 280-480 | 245 | 160 | 50.3 |
| PYZ1750 | 1700 | 215 | 10-30 | 185 | 115-320 | 245 | 160 | 50.3 |
| PYD1750 | 1700 | 100 | 5-13 | 85 | 75-230 | 245 | 160 | 50.2 |
| PYB2200 | 2200 | 350 | 30-60 | 300 | 59-1000 | 220 | 280/260 | 80 |
| PYZ2200 | 2200 | 275 | 10-30 | 230 | 200-580 | 220 | 280/260 | 80 |
| PYD2200 | 2200 | 130 | 5-15 | 100 | 120-340 | 220 | 280/260 | 81.4 |
Customize solutions according to customer requirements!
We are able to design and manufacture complete crusher plants with capacity from 30tph to 500tph, and to provide optimum and most economical solutions according to customers' requirements on stone specifications, output, application, etc.
Raw material: grinite, capacity: 500 tons/hour, finished products: 0-10mm, 10-20mm, 20-30mm.
Equipment configuration: ZSW6000X1300 vibrating feeder, PE1000x1200 jaw crusher, 2 sets HP500 cone crusher, 4 sets 4YZS2470 vibrating screen.
Since in 2004, Zhengzhou General Mining Machinery Co.,Ltd has been the professional manufacturer of Grinding Mill, crushers and sand making machines,etc. TYM is committed to helping more users around the world to obtain higher profits and faster return on value. Our main products are European Version Grinding Mill, Raymond Grinding Mill, High Pressure Suspension Roller Mill, Micro-powder Grinding Mill, Jaw Crushers, Impact Crushers, Hammer Crusher, Compound Crushers, Ball Mill, nine series of products with more than 30 kinds of specifications.
Our factory
Our factory covers an area of 120,000 square meters and manufactures TYM brand Mining Machinery,has passed international ISO:9001, GOST and CE certification.
The package of all equipment is accord with the standard protective measures.The packing is suitable for short and long distance transportation. The moisture proof, quake proof, protected against dampness, and rustproof protection measures were taken to ensure the machine shipping to customers safely. All the machine will be packaged by plastic film.
Warranty
100% brand new when leaving the factory. The seller guarantee quality of the machines (excluding wearing parts) for a period of one year from the date of trial run finish under our technician's guidance, but not exceed 15 months from date on which machine leaves the factory.
Pre-sale services:
(1) Device model choice.
(2) According to customer's special requirements, design and manufacture of products.
(3) Training technical personnel for clients.
(4) The company is free of charge to the user on-site engineering and technical personnel planning site for the user to design the best processes and program.
Sale services:
We will send technicians to you for guiding the equipment installation and commissioning and staff training.
Sales tracking :
(1) product acceptance.
(2) to help customers develop construction programs.
After-sale services :
(1) Guiding customers' installation.
(2) On-site training of operators.
(3) Complete sets of equipment installed, 1-2 full-time technical staff to stay free of charge to help customers on-site production of 1 month, until the user' satisfaction.
