Audited Supplier
HL-60-SS
24hours Online Services
380V 50Hz
CE, ISO
60*40*45(Cm)
113*107*63
3kw+0.75kw
35oc or 50oc
60
1/2HP
Programmable Cycling Salt Spraying Tester
+35 ºC ~ +50 ºC
KOMEG
Strong Plywood Case, Meet International Standards
Standard and Customized
Dongguan, China
90321000
Product Description
Standard 108L salt spray corrosion tester Environmental Test Chamber
Overview:
Salt spray corrosion test chamber (Salt spray test chamber, salt box, salt spray test machine, salt spray corrosion test chamber) can be used to assessing the ability of salt spray corrosion resistant materials. It can be used to assess materials' protection layer resistance capacity to salt spray corrosion, whether you are testing hardware industry, screw industry, electroplate industry, automotive and motorcycle parts, communication industry, computer industry, electronic industry, coating industry, research institution, etc. Our salt spray test chamber can offer you a best solution. Due to the increasingly harsh environment, Salt Spray Tester becomes more and more popular. Salt Spray Tester has been the most hot-selling products these days, for the fast delivery time and reasonable price of Salt Spray Tester.
Features:
A. The whole part of the device is made of P. V. C. Sheet and the inside of the device is reinforced by using a special lining material. Hence, it is sturdily made and will not transform forever.
B. The test chamber is heated from five directions in order to ensure the temperature difference in the chamber may be kept within (± 1º C).
C. Spray nozzle: The nozzle is specially made to enable it to suck up the salt water and then spray it out in the shape of mist with considerable high speed. When it falls on the surface of the item
Being tested, the difference of fallen mist may be controlled within ± 0.3ml / 80 cm2h.
D. HUNTER PRINCIPLE is used to make the saturated air hot and moist and to keep the humidity in the test chamber required for test.
E. Temperature is the pre-requisite condition that with have direct impact on corrosion rate. We use P. I. D. Temperature control unit to limit the temperature difference within the range of ± 0.5º C.
F. A warning device is used to indicate the low level of the test fluid, when the fluid is only enough for being sprayed for five hours, a buzzer will remind the user to replenish the liquid to ensurec Continuous spray test.
Introduction
KOMEG offers the newest and most modern salt fog testing chambers for your testing requirements. KOMEG salt spray test chambers are offered in 60 Liter, 270 Liter, 800 Liter and 960 Liter models and are cost effective solutions to accelerated corrosion testing of samples in salt fog. Models have an uncomplicated design that has optimized the open area to maximize the number of test coupons while providing headroom for testing large and bulky objects.
Ergonomic design
The KOMEG Salt Spray Chambers are floor standing units with lockable wheels (big models) to allow easy and secure repositioning. Height and reach distances provide easy access for loading and unloading coupon samples into removable slotted racks. An optional reinforced false floor is available to easily locate bulky and heavy test items.
Accessibility
The Salt Spray chambers have an uncomplicated design that optimizes the open area to maximize the number of test samples while providing ample room for testing large and bulky items.
Visibility
There are two kinds of material for the gabled canopy. One is the transparent material for the small model allowing full visibility inside the chamber. The other is the fully insulated covering with inspection window that will ensure the chamber achieves maximum operating temperature if the chamber is located in a cool laboratory environment.
Clean operation
The combined water drain and fog vent removes the test water and fog from the chamber to prevent salt fog escape into the test lab atmosphere when the canopy is opened.
Long chamber life
The chambers are made of hard PVC that stands up to the relentless attack of the corrosive test environment.
Price
These chambers are one of the most cost effective corrosion test models in the marketplace.
Standards implemented and met
1 GB/T 2423.17-1993 salt spray test
2 GB/T 2423.18-2000 salt spray test
3 GB/T 10125-1997 salt spray test
4 ASTM. B117-97 salt spray test
5 JIS H8502 salt spray test
6 IEC68-2-11 salt spray test
7 IEC68-2-52 1996 salt spray test
8 GB. 10587-89 salt spray test
9 CNS. 4158 salt spray test
10 CNS. 4159 CASS Copper accelerated acid salt spray test
11 GB/T 12967.3-91 CASS Copper accelerated acid salt spray tester
| Specifications (Note: We reserve the right to change specifications without prior notice) | |||
| Model | HL-160-NS | HL-90-BS | HL-60-SS |
| Interior dimensions(W*H*D)mm | 1600*500*1000 | 900*500*600 | 600*400*450 |
| Exterior dimensions(W*H*D)mm | 2240*1500*1600 | 1460*1280*910 | 1130*1070*630 |
| Volume(L) | 800 | 270 | 60 |
| Heater | 15KW+1KW | 7KW+0.75KW | 3KW+0.75KW |
| Air compressor | 2HP | 1/2HP | 1/2HP |
| Temp. range | 35 ºC~ 50 ºC | ||
| Power | AC220V 1Φ 50Hz | ||
| Specifications for Salt Spray Test Chamber : | |||||
| Model | KM-F-60A/C | KM-F-90 A/C | KM-F -120 A/C | KM-F-160 A/C | KM-F -200 A/C |
| Inner Box Size(L*W*H)mm | 600*450*400 | 900*600*500 | 1200*800*500 | 1600*1000*500 | 2000*1000*600 |
| Outside Box Size(L*W*H)mm | 1100*600*1200 | 1410*900*1200 | 1850*1050*1200 | 2350*1250*1300 | 2650*1250*1400 |
| Equipment Material | Both inside & outside shell adopt imported P.V.C rigid plastic board, and tank cover uses imported transparent P.V.C rigid plastic board | ||||
| Temperature Range | 35ºC-55ºC | ||||
| Temperature Fluctuations | ±0.5ºC | ||||
| Temperature Uniformity | ±2ºC | ||||
| Temperature Precision | ±1ºC | ||||
| Test Chamber Temperature | Spray Method(NSS AASS)35±1ºC;Spray Method(CASS )50±1ºC | ||||
| Pressure Barrel Temperature | Spray Method(NSS AASS)47±1ºC;Spray Method(CASS )63±1ºC | ||||
| Brine Temperature | 35ºC±1ºC | ||||
| Spray Quantity | 1.0-2.0ml/80cm²/hr | ||||
| PH | NSS(6.5-7.2);AASS CASS(3.1-3.3) | ||||
| Lab Volume | 108L | 270L | 480L | 800L | 1200L |
| Brine Tank Capacity | 15L | 20L | 30L | 40L | 60L |
| Power | 1 phase,AC220V,50Hz,2.5KW | 3 phase,AC380V,50Hz, 5.5KW | |||
| Multiple Safety Protection Devices | Current discharge protection, over pressure protection, over temperature protection , over load fuse protection | ||||
| Accessories | Testing Salt/Measuring tank/Equipment each 1 set | ||||
Note: 1. We reserve the right to change specifications without prior notice 2. Customized sizes and configurations available | |||||
