PLC Environmental Simulation Constant Temperature Temperature Humidity Test Chambers

Trustable supplier provide PLC Environmental Simulation Constant Temperature Temperature Humidity Test Chambers

Features / Benefits more than you can get from other supplier in China
1) Delicate touch and excellent user experience
2) Unique and compact design,top grade appearance,stable performance and easy operation.
3) Can simulate a wide range of temperature and humidity environments
4) Capable of testing large components, assemblies, and finished products
5) Customized sizes and configurations available
6) 1 year warranties

Technical Parameters of Temeperature Humidity Test Chamebr KMH-408R:
Workspace volume: (W)700 x (H)750 x (D)800mm
Exterior size: (W)980 x (H)1940 x (D)1740mm
Temperature range: -20~-150°C
Temperature constancy: ±0.5°C
Temperature uniformity: ±2.0°C
Temperature change rate: -20~+100°C within 35 minimum (with empty load), +20~-20°C within 45min (with empty load)
Humidity range: 20 - 98% RH
Humidity uniformity: ±3.0% RH
Humidity constancy:  ±2.5% RH
Insulation:
Exterior, baked painting steel or stainless steel (SUS304)
Interior, mist finishing stainless steel (SUS304)
Insulation material, rigid polyurethane foam and glass fiber
Door: Heating wire was installed to prevent condensation in case of low-temperature
Inspection window (W X H): 2 sets 2, 470 X 570mm inspection window, made of multi-layer coated hollow electric glass, effectively insulation and prevents condensation
Light device: 11W/220V AC X 1 installed on the inspection window
Water outlet: Water outlet available for condenser
Water replenishment: Water pump

Features:
Standard configurations:
Sight window X 1
Cable port (port Ø 50mm) X 1
Shelves X 2
Chamber lamp X 1
Power cable X 2m
No fuse breaker, over-pressure, over-heat and over-current for compressor, over-temperature, overloading of blower, dry heat-protection
Optional accessories:
Cable port: Ø 100mm is available
Shelves
RO-type water purifier: R-80/day
Provided to keep the humidifying heater and wet bulb wick free from scale
Inner glass door with operating port: A glass door can be provided behind the main door so that specimens can be observed
Two operating ports of 130mm diameter are used for handing specimens inside the chamber without opening the glass door
Dehumidifier: The rotation regenerating dehumidifier M-120 ensures precise control of low-humidity (5° C 5% RH) for electronics


Minimum Order Quantity: 1 set
Payment terms:T/T 50% advance, balance before shipment

The first order of a new customer will gain a special discount, and trade agent also welcomed.
We will make sure our trade agents' interest.

Installation environment 
Distance from the wall to both sides and rear of chamber more than 800mm, to the front more than 1500mm. Provide independent power distribution switchgear and humidification condensate drains, and external power connector device is necessary  
Ground level, well-ventilated , non- flammable, explosive, corrosive gases and dust
No strong electromagnetic radiation nearby
With floor drain ( less than 2 meters from the refrigeration unit )
Venue floor load capacity : not less than800kg/m2
Leave adequate space for maintenance


Specifications for All Models of Climatic Test Chambers
 

WHO WE ARE?

KOMEG has been specialized in Environmental test chambers since 1990. 

WHAT DO WE SUPPLY?

We could manufacturer all kinds of environmental test Chambers. Such as:
1. Temperature & humidity test chamber ( Temperature range: -70ºC~+180ºC,Humidity range: 10%~98%)
2. High low-temperature test chamber( Temperature range: -70~+180ºC)
3. Thermal shock test chamber( Two-zone type and three-zone type)
4. ESS test chamber (Ramp rate: 5ºC/min, 10ºC/min, 15ºC/min, 20ºC/min, 25ºC/min)
5. Salt spray corrosion test chamber
6. Walk-in temperature and humidity test chamber
7. The burn-in room test chamber
8. Temperature & altitude chamber
9. Vibration test chamber

WHY CHOOSE US?

1,Assured Quality
We are constantly updating our product line based on international standards for quality.

2,Competitive Rate
We are competitive compared to most top brands, such as Weiss, Espec, CSZ, etc.
Komeg has a high reputation in the market, also we have after service in Malaysia, Thailand, Italy, and so on. So we can offer you a fast response to service. 

The advantage of having our test Chamber KOMEG made:

Features 1: Good Quality Guarantee, The main parts we choose France Tecumseh, Germany Bitzer, USA Copeland, Japan Sanyo…

Features 2: 100% QC Check before shipment. There has 2 times check, during manufacture and before shipment.

Features 3: Good Service System. There has a service team with can help the customer via remote assistance via the internet.

Features 4: The test chambers have got the CE, ISO system approval.

Features 5: Accept OEM. ODM Orders. We accept to make your brand /logo on our environmental chambers.

Packaging
Each set protected with resin fiber and PP film, then put into strong wooden case with operation mannual and video inside.


After-sale service

If you face any problems in future during testing process we promise we will give you a reply within 48 hours and solution provide within 3 working days. We can offer operation video and English operation muanual. We can provide video-conference. If customers require on-site service, the transport and travel expense shall be borne by customer.