Audited Supplier
2. The volume of the drum is increased, and the one-time loading amount is increased from the original 1.2 tons (0.6m3) to 1.8 tons (0.7 m3);
3. The power of the shot blaster is increased from 30Kw to 37Kw;;
4. The built-in roller solves the problem of sand leakage from the roller of the original roller shot blasting machine;
5. Adopt double lifting mechanism to reduce the installation height;
6. Two-stage magnetic separation. When the castings are cleaned, the wear-resistant parts have little loss;
7. The feeding mechanism, door body lifting and roller turning are driven by double hydraulic cylinders to run smoothly;
8. The hydraulic system is equipped with a shunting and collecting valve and a balancing valve, which can adjust the pressure of each branch of the ducting and make the operation more stable;
9. A roller rotation detection mechanism is provided to monitor the roller operation in real time;
10, the thickness of the cylinder is increased by 12mm from the original 10mm, and the service life is longer;
11. Because of the low impact strength of the orifice plate, the sand leakage orifice plate of the roller is detachable, and the operation and maintenance cost of the roller is lower;
12. The platform and the material bin are located at one side of the chamber body, and the drum is convenient for maintenance and replacement.
Main technical parameters and performance of equipment:
| No | Name | quantity | Technical parameters and sexual performance | Remarks |
| 1 | Roller device | 1 | Dimensions: φ Φ1780x1500L Rotation speed: ~4.2r/min (variable frequency speed regulation) Effective volume: 0.7m3 Maximum loading capacity: 1800kg | Roller power: 2.2 Kw Number of reducers: 2 |
| 2 | Feeding mechanism | 1 | Automatic feeding | Hydraulic lifting, power: 11kw |
| 3 | Vibrating conveyor | 1 | Power: 2*2.2KW | |
| 4 | Blasting wheel | 1 | Shot blasting quantity: 560kg/min Impeller speed: 2100rpm | Model: Q180-4RK Power: 37kw |
| 5 | Elevator | 1 | Model: KTS60 (double lift) Lifting capacity: 60T/h | Power of reducer: 4KW With braking function |
| 6 | Segregator | 1 | Type: CX1000 Separation capacity: 60t/h Wind speed in separation area: 4-5m/s | Roller screen motor power: 2.2Kw Magnetic separation drum motor: 1.5Kw, 0.75Kw |
| 7 | Shot gate | 2 | DK50 type | Cylinder control switch |
| 8 | Screw conveyor | 1 | Transportation capacity: 60T/h | Power: 1.5KW |
| 9 | Dust collector | 1 | Model: CMC81 Ventilation capacity: 4500m3/h | Secondary dust removal: cyclone dust collector+pulse bag dust collector Fan power: 7.5KW |
| 10 | Total power | ~76KW | Operating voltage: 380V/50HZ Operating voltage: 220V/50HZ | |
| 11 | Compressed air | Consumption: 0.8 m3/h | Buyer's own | |
| 12 | Shots for first time loading | 1800Kg | Buyer's own | |
| 13 | Dust emission | ≤10mg/ m3 | ||
| 14 | Equipment noise | ≤ 93dB(A) | ||
- Scope of supply:
| No | Name | quantity | Main composition |
| 1 | Bottom bracket | 1 | Base, bracket, etc. |
| 2 | blasting chamber | 1 | Roller, chamber body, roller driving device, etc. |
| 3 | Roller body | 1 | Door, door driving device, shot blasting assembly, etc. |
| 4 | Bottom spiral | 1 | Screw shell, screw shaft, reducer, etc. |
| 5 | Elevator | 1 | Case, lifting belt assembly, pulleys at top and bottom, driving, tensioning, shot valve, etc. |
| 6 | Magnetic separator | 1 | Spiral drum screen, magnetic separation drum, silo, projectile valve, reducer, etc. |
| 7 | Supporting system | 1 | Platform, supporting, frame, etc |
| 8 | Vibrating conveyor | 1 | Vibrating bed, base, vibrating motor, spring, etc. |
| 9 | Feeding mechanism | 1 | Hopper, bracket, drive system, etc. |
| 10 | Dust removing system | 1 | Cyclone dust collector, pulse bag dust collector, ducting, fan, etc. |
| 11 | Control system | 1 | Control cabinet (PLC), cable and wire to connect the chamber to the chained, detection device, electromagetic valve, hydraulic pump station, etc. |
Largest and professional manufacturer of shot blasting machine in China.
Main market: South of America,North of America,Middle East,Australia,Asian,South of Asia.
The company has first-class technology research-development center and well-developed quality management system, and we have passed ISO9001 international quality system certification. Our company is the National Blasting & Peening Standardization Technology Committee Unit. And the company takes part in and sets down the national standard Parabolic Shot Equipment General Technical Conditions All products apply CAD computer-aided design, the appearance applies three-dimensional software design, and key components of numerical simulation use finite element analysis.
Our main products are cleaning machinesand-peening equipmentenviroment-protection and dust-removal equipment,and offer the ideal key equipments to casting, forging and heat treatment, steel structure, container, machinery, shipbuilding, aircraft, locomotive, the machine tool industry.
Q: What standards are you carrying out for your products?
A: We produce according to the ISO9001 and ISO14001 rules.
Q: How to install the machine?
A: We will arrange 1~2 engineers to your factory to guide installation and assembly.
Q: Do you sell steel shot or steel grit which can be uses in shot blasting machine?
A: We have four production lines for steel shot and steel grit production, one work shop for steel cut wire shots, and one workshop for stainless steel shot and Aluminium shot and so on.
Q: Do you have the right to export?
A: Yes, we registered in the Customs and gained the right to export by ourselves.
Q: The address of your company?
A: Our address is: Qingyang, Zouping county, Binzhou city, Shandong province, China. P.C.: 256217.
Q: What's the nearest airport around your company?
A: The Jinan International Airport is the nearest arround our company. If you want to come to visit out plants, we can pick you up there. BTW, the nearest railway station for fast train is Jinan West Station. We can also pick you up from the station.
We are looking forward to doing business and making friends with you.
In order to give you the suitable machine , pls provide below message for us
1. What is your workpiece and the material and the shape ?
2.The Max. Length/Width/Height of the workpiece and the MAX./MIN.weight of your workpiece ?
3.The productivity you need to blasting the workpiece ( how many T or piece per day or per month?)
4. The power supply you need( Our China :380V, 3PH, 50HZ)
5. Better to send us the workpiece photo or drawing.
