Audited Supplier
2. Cleaning type: casting cleaning and de-core, casting and forging descaling, mixed line or single line production, multiple workpiece mixed cleaning
3. Cleaning purpose: surface sticky sand, oxide skin, etc., to improve the surface quality.
Main technical parameters and performance of equipment:
| No | Name | Qty | Technical specs and parameters | Remarks |
| 1 | Production efficiency | 10-15T/h | ||
| 2 | Workpiece requirements | Workpiece ≤680mm×500mm×350mm Workpiece weight ≤ 150kg per piece Maximum workpiece temperature ≤ 80ºC | ||
| 3 | Blasting chamber | 1 | Main chamber: L×W×H=9000×2600×3000mm | |
| 4 | Multi-angle swinging bed | 1 | Length: 8595mm Roller inner diameter: ø1460mm Swing angle: 120° | The inner liner is a 20mm thick highly wear resistant Manganese plate |
| 5 | Blasting wheel | 6 | Model: SRD500 Capacity: 6×670kg/min Rotation speed of turbine 2250rpm Shot speed 76.5m/s | Belt transmission Motor power: 6×45kw VFD control |
| 6 | Elevator | 2 | Capacity: 240t/h | Reducer power: 2 X15 kw VFD control |
| 7 | Shot reclaim quantity | Capacity: 240t/h | ||
| 8 | Shot gate | 3 | Model: DK80 | Cylinder control switches |
| 9 | Dust collector | 1 | Ventilation: 32000 m3/h Total filtering area 522m2 Filtering air speed 1.07m/min | Pulse filter bag dust collector Fan power : 55KW |
| 10 | Swinging bed drive | 1 | Hydraulic or reducer drive | |
| 11 | Sound-proof chamber | 1 | Noise less than 85dB | |
| 12 | Total power | ~427KW | Working voltage: 380V/50Hz Operating voltage: 220V/50Hz | |
| 13 | First filling of shot | 20000kg | Not included with the machine | |
| 14 | Compressed air | Air pressure: 0.5~0.7MPa | Consumption: 2m3/min | |
| 15 | External size | L×H×W =4597×3262×5709 mm | ||
| 16 | Dust emission | ≤30mg/m3 | ||
| 17 | Noise | ≤93dB(A) | ||
- Supply scope:
No Name Qty Supplying scope 1 Blasting chamber 1 chamber, protection liner, bracket etc. 2 Multi-angle swinging bed mechanism 1 swinging bed, support wheel etc. 3 Inlet conveyor 1 Vibrating Screen, inspection system etc. 4 Outlet conveyor 1 Vibrating Screen 5 Shot reclaim system 1 Elevator, magnetic separator, belt conveyor, screw, etc. 7 Blasting wheel assembly 6 Blast wheels, motors etc. 8 Pneumatic shot supplying system 6 shot gate, air control system, shot sliding tube etc. 9 Dust collector 1 dust collector, settling tank, ducting, fan 10 Electrical control system 1 Control cabinets (PLC), secondary pipeline, detecting devices, etc. 11 Swinging drive system 1 Reducer, belt pulley, chain etc.
Largest and professional manufacturer of shot blasting machine in China.
Main market: South of America,North of America,Middle East,Australia,Asian,South of Asia.
The company has first-class technology research-development center and well-developed quality management system, and we have passed ISO9001 international quality system certification. Our company is the National Blasting & Peening Standardization Technology Committee Unit. And the company takes part in and sets down the national standard Parabolic Shot Equipment General Technical Conditions All products apply CAD computer-aided design, the appearance applies three-dimensional software design, and key components of numerical simulation use finite element analysis.
Our main products are cleaning machinesand-peening equipmentenviroment-protection and dust-removal equipment,and offer the ideal key equipments to casting, forging and heat treatment, steel structure, container, machinery, shipbuilding, aircraft, locomotive, the machine tool industry.
Q: What standards are you carrying out for your products?
A: We produce according to the ISO9001 and ISO14001 rules.
Q: How to install the machine?
A: We will arrange 1~2 engineers to your factory to guide installation and assembly.
Q: Do you sell steel shot or steel grit which can be uses in shot blasting machine?
A: We have four production lines for steel shot and steel grit production, one work shop for steel cut wire shots, and one workshop for stainless steel shot and Aluminium shot and so on.
Q: Do you have the right to export?
A: Yes, we registered in the Customs and gained the right to export by ourselves.
Q: The address of your company?
A: Our address is: Qingyang, Zouping county, Binzhou city, Shandong province, China. P.C.: 256217.
Q: What's the nearest airport around your company?
A: The Jinan International Airport is the nearest arround our company. If you want to come to visit out plants, we can pick you up there. BTW, the nearest railway station for fast train is Jinan West Station. We can also pick you up from the station.
We are looking forward to doing business and making friends with you.
In order to give you the suitable machine , pls provide below message for us
1. What is your workpiece and the material and the shape ?
2.The Max. Length/Width/Height of the workpiece and the MAX./MIN.weight of your workpiece ?
3.The productivity you need to blasting the workpiece ( how many T or piece per day or per month?)
4. The power supply you need( Our China :380V, 3PH, 50HZ)
5. Better to send us the workpiece photo or drawing.
