Audited Supplier
ENBY-51.2V200Ah
Lithium-Ion Batteries
Car, Bus, UPS, Electric Power, Electric Bicycle, Boat
24V
Medium Discharge Rate
Square Battery
Li-ion
Open Frame
Chargeable
Solar Charger
Solar Charger
18650
Saso, GOST-R, Kc, PSE, Ctia, RoHS, TUV, CB,
Recyclable
240*161*181
Solar & UPS Backup, Power Bank, RV, etc.
Customise
RoHS CE IEC MSDS Un38.3
>4000 Times
-20°c-45°c
8 Years or 16000hours
LFP
Battery OEM
Blue Film or Metal Case or Plastic Case
According to the Requirements
Tianjin of China
8507600090
Product Description
LiFePO4 POWER STORAGE WALL
Long life and safetyVertical industry integration ensures more than 5000 cycles with 80% DoD.Safe Lithium iron phosphate battery cell.
Intelligent
Each battery with independent BMS system manages power output smartly and effectively.
Modularization
Modular design gives the end customers the power of choice of capacity Deliver up to 40.96KW with single max module (2.56kWh) at 16pcs parallel connection.
Easy to install and use
Just plug and play to minimize the installation time and cost.
Compact and fashionable design fits in your sweet home environment.
Compatibility
Compatible with most of the available Hybrid inverters.
Safety Cert
CB-IEC62619, CE-EMC, CEI 0-21, UN38.3, MSDS
| Items | Specification | Remark |
| Nominal Voltage | 51.2V | |
| Capacity | 200AH (10.24KWh) | |
| Charge limit voltage | 58.4V | Max |
| Working Voltage | 44.8 8.4V | |
| Standard charging current | 40A | 0.2C |
| Maximum charging current | 100A | Based on the working current of BMS |
| Discharge cut-off voltage | 44.8V | |
| Standard discharge current | 40A | 0.2C |
| Maximum discharge current | 100A | Based on the working current of BMS |
| Cell model | LFP 3.2V 50Ah | |
| Shell main material | cold rolled steel | |
| Dimensions | 850*625* 185±3mm(without mounting angle) | |
| Battery weight | 100kg±2kg | Installation configuration not included |
| Range of working temperature | Charge: 0C~45ºC | At10%-90%RH |
| Discharge: -20ºC -60ºC |
The above dimensions are the dimensions of the main body of the product, excluding accessories .
| 1 | Weak current switch | BMS Turn On/OFF |
| 2 | Breaker | Input and output power switch |
| 3 | P+ | Positive connector, input and output positive interface |
| 4 | GND | ground connection |
| 5 | Reset switch | Reset button switch (hidden), long press 3S to take effect. |
| 6 | DIP switch | When performing multi-machine parallel communication operation , it is necessary to configure the dial address first. |
| 7 | Dry contact interface | Dry contact interface |
| 8 | RS482- 1/CAN | Host computer communication debugging interface and inverter communication interface |
| 9 | RS232 | Host computer communication debugging interface |
| 10 | RS485-2 | Multi-machine parallel communication interface |
| 11 | P- | Negative connector, input and output negative interface |
Product features
A variety of charge and discharge modes are available
Max. charging current up to 120A
Support remote monitoring
Up to 99.9% MPPT tracking efficiency
Comprehensive protection
Simple to install and easy to use
Support Li-ion battery BMS communication and BMS dual activation
A variety of charge and discharge modes are available
Max. charging current up to 120A
Support remote monitoring
Up to 99.9% MPPT tracking efficiency
Comprehensive protection
Simple to install and easy to use
Support Li-ion battery BMS communication and BMS dual activation
| MODEL | HSI 1000S | HSI 1500S |
| INVERTER OUTPUT | ||
| Rated Output Power | 1,000W | 1,500W |
| Peak Power | 2,000VA | 3,000VA |
| Rated Output Voltage | 230Vac,Single-Phase | |
| Load Capacity of Motors | 1HP | |
| Output Frequency | 50Hz/60Hz | |
| Rated Output Voltage | pure sine wave | |
| Switch Time | 10ms(Typical) | |
| BATTRY | |
| Battery Type | Li-ion / Lead-acid / User-defined |
| Rated Battery Voltage | 12V |
| Battery Voltage Range | 10.5~15.5Vdc |
| Max. PV Charging Current | 60A |
| Max. Utility/Generator Charging Current | 60A |
| Max. Hybrid Charging Current | 120A |
| PV INPUT | |
| Num. of MPPT | 1 |
| Max. PV Array Power | 1,000W |
| Max. Input Current | 60A |
| Max. Open-circuit Voltage | 108Vdc |
| MPPT Voltage Range | 15~90Vdc |
| UTILITY / GENERATOR INPUT | ||
| Input Voltage Range | UPS Mode:170~280Vac;APL Mode:90~280Vac | |
| Frequency Range | 50/60Hz | |
| Bypass Overload Current | 6.5A | 9.7A |
| GENERAL | |
| Dimensions | 357.5*235*103mm |
| Weight | 5.5kg |
| Protection Degree | IP20, Only indoor |
| Operating Temp. Range | -10ºC~55ºC |
| Cooling Method | intelligent fan |
| Warranty | 18 Mouths |
| COMMUNICATION | |
| Embedded Interfaces | RS485 / USB / Dry contact |
| External Module (optional) | Wi-Fi / GPRS |
Our battery products cover multiple fields and are widely used, supporting customer customization.
| 1. Forklift Battery | 2. Golf Cart Battery | 3. LiFePO4 Battery Packs |
| 4. Telecom Lithium Battery | 5. UPS Lithium Battery | 6. AGV Battery |
| 7. Customized lithium battery | 8. Power Bank | 9. Home Energy Storage |
Q1: What payment terms do you accept?
Q2: What is your Warranty Policy?
A: We ofer 5 years warranty for our products and can be replaced with new ones for free if quality lssues. Using Lithiumiron phosphate battery, which has high safety performance, long cycle life, with service life of more than 10 years.
Q3: How to choose a right battery?
A: Tell us your demand, then our sales will recommend a suitable battery to you.
Q4: How to solve the technical problem?
A: 24 hours after-service consultancy just for you and to make your problem to solve easily
Q5: What is your MOQ?
A: We have no MOQ, 1 sample order is also ok for us,but best Cost performance is by big quantity order.
Q6: Could you send free samples?
A: You samples fee will be returned when you place bulk order
Q7:Can you accept OEM and ODM Service?
A:Yes, we supply OEM&ODM service as clients requirement
Q8:How long will be the delivery?
A:Usually delivery in 4 weeks, but could be change according to the quantity or other things.
* Do not use other types of chargers to charge the lithium battery, you need to use a special charger for lithium batteries.
* Do not store the battery in a humid, high temperature place;
* Do not put the battery in the fire to avoid explosion;
* Do not short-circuit the battery terminals or reverse charge the battery;
* Do not disassemble the battery shell;
* Do not touch the battery with wet hands;
* Do not squeeze or hit the battery;
* Prohibit overcharging, overdischarging, short circuit of positive and negative poles
* Avoid charging in direct sunlight;
* Do not soak in water, and the wading depth shall not be higher than 1/3 of the cabinet;
* Do not disassemble or modify the battery at will;
* When the battery is not in use, it should be fully charged and stored in a dry and cool place, well insulated to prevent heavy pressure and child contact, and fully charged every 3 months
* If damage is found after unpacking, please contact the distributor or manufacturer in time after finding out.
