Audited Supplier
1.Product presentation:
Glass fibre reinforced injection moulding grade with improved flame retardance based on red phosphorus, giving outstanding mechanical and electrical properties for components requiring high stiffness.
The products can also be offered as BMBcert™ and/or Ccycled™ . Due to the Massbalance approach the product properties do not change
2.Ultrami combines a variety of attractive properties:
High strength and rigidity toughness; Good elasticity; Outstanding chemical resistance;
Dimensional stability; Low creep; Excellent sliding friction; Easy to process;
3.PA66 Ultramid A3X2G5 PA66 Application field Use:
Widely used in machinery, instrumentation, automotive parts, electronics, railways, home appliances, communications, spinning machines, sports and leisure products, oil pipes, fuel tanks and some precision engineering products.
Electronic and electrical: connectors, reel spool, timer, cover circuit breaker, switch housing, socket, connector, washer, etc.
Automobile: cooling fan, door knob, fuel tank cover, intake barrier, water tank cover, lamp holder, oil filter, gear shift lever, etc.
Industrial parts: chair, bicycle frame, skate sole, textile shuttle, pedal, pulley, power tools, etc.
Others: Power tools, shields, blades, gears, machine tool accessories, sports equipment, toy products, cable ties, etc.
CAMPUS®
Ultramid® A3EG6-PA66-GF30
Glass-fiber reinforced injection molding grades for machine parts and housings with high stiffness and dimensionally stable properties, e.g. lamp holder housings , cooling fans, insulating profiles for aluminum window frames
| Radiator tanks and electrical insulation components for automotive cooling systems. | |||
| Rheological properties | Dry/Conditioned | unit | standard test |
| Melt volume flow rate, MVR | 30/* | cm³/10min | IS01133 |
| temperature | 275/* | ºC | ISO 1133 |
| load | 5/* | kg | IS01133 |
| Die shrinkage, parallel | 0.5/* | 9% | IS0294-4,2577 |
| Die shrinkage, vertical | 1.0/* | 9% | ISO 294-4,2577 |
| Mechanical behavior | Dry/Conditioned | unit | standard test |
| Tensile modulus | 10000/7200 | MPa | ISO527-1/-2 |
| Fracture stress | 190/130 | MPa | IS0527-1/-2 |
| Elongation at break | 3/5 | 9%6 | IS0527-1/-2 |
| Tensile creep modulus, 1000h | *15300 | MPa | ISO 899-1 |
| Unnotched simply supported beam impact strength, +23ºC | 85/100 | kJ/m2 | ISO 179/1eU |
| Unnotched simply supported beam impact strength, -30ºC | 70/70 | kJ/m2 | ISO 179/1eU |
| Simple supported beam notched impact strength, +23ºC | 11/20 | k/m2 | IS0179/1eA |
| Simple supported beam notched impact strength, -30°ºC | 10/9.5 | kJ/m² | ISO 179/1eA |
| Thermal properties | Dry/Conditioned | unit | standard test |
| Melting temperature, 10°C/min | 260/* | ºC | ISO 11357-1/-3 |
| Heat deformation temperature, 1.80MPa | 250/* | ºC | IS075-1/-2 |
| Heat distortion temperature, 0.45 MPa | 260/* | ºC | IS075-1/-2 |
| Vicat softening temperature 50ºC/h 50N | 250/* | ºC | IS0306 |
| Coefficient of linear expansion, parallel | 28/* | E-6/K | IS011359-1/-2 |
| Coefficient of linear expansion, vertical | 88/* | E-6/K | IS011359-1/-2 |
| Combustibility at 1.5mm nominal thickness | HB/* | class | IEC60695-11-10 |
| Thickness of test specimen | 1.6/* | mm | IEC60695-11-10 |
| Yellow Card Existing | Yes/* | ||
| Combustibility at thickness h | HB /* | class | IEC60695-11-10 |
| Thickness of test specimen | 0.8/* | mm | IEC60695-11-10 |
| Yellow Card Existing | Yes /* | ||
| Combustibility ·Oxygen Index | twenty four/* | 9% | IS04589-1/-2 |
| Electrical properties | Dry/Conditioned | unit | standard test |
| Relative dielectric constant, 100Hz | 4.2/9.7 | IEC62631-2-1 | |
| Relative dielectric constant.,1MHz | 3.7/4.3 | IEC62631-2-1 | |
| Dielectric loss factor, 100Hz | 120/1530 | E-4 | IEC62631-2-1 |
| Dielectric loss factor, 1MHz | 210/810 | E-4 | IEC62631-2-1 |
| Volume resistivity | 1E13/1E10 | Ohm*m | IEC62631-3-1 |
| Surface resistivity | */1E10 | Ohm | IEC62631-3-2 |
| Dielectric strength | 40/37 | kW/mm | IEC60243-1 |
| Comparative Tracking Index | -/550 | IEC 60112 | |
| Other features | Dry/Conditioned | unit | standard test |
| Water absorption | 5.5/* | 9% | Similar to IS062 |
| Hygroscopicity | 1.7/* | 9%6 | Similar to IS062 |
| density | 1360/- | kg/m2 | Iso1183 |
| Special properties of molding measurement | Dry/Conditioned | unit | standard test |
| Viscosity number. | 145 | Cm3/g | Iso307 1157 1628 |
Introducing our top-quality GF15 GF20 GF30 Reinforced Resin Engineering Plastic Raw Material Pellet Particles Injection Molding PA66!
Welcome to Suzhou Furenxiang Trade Co., Ltd., where we are dedicated to providing you with a game-changing experience in the world of engineering plastics. With over 10 years of factory experience, we are thrilled to offer you the highest quality products that will exceed your expectations.
Our GF15 GF20 GF30 Reinforced Resin Engineering Plastic Raw Material Pellet Particles Injection Molding PA66 is a true masterpiece. Meticulously crafted, it guarantees exceptional quality and durability. Say goodbye to subpar materials and hello to a product that will stand the test of time.
But that's not all! We understand that price matters to you, and we've got you covered. Our competitive prices ensure that you get the best value for your money. No need to compromise on quality or break the bank. With us, you can have it all.
At Suzhou Furenxiang Trade Co., Ltd., we take pride in our perfect service management system. We've left no stone unturned to meet your needs and provide you with outstanding customer service. Your satisfaction is our top priority.
We understand that you are unique, and so are your requirements. That's why we offer customization options for our GF15 GF20 GF30 Reinforced Resin Engineering Plastic Raw Material Pellet Particles Injection Molding PA66. Tailor the product to your specific needs and make it truly yours.
Don't miss out on this incredible opportunity to revolutionize your projects. Get your hands on our GF15 GF20 GF30 Reinforced Resin Engineering Plastic Raw Material Pellet Particles Injection Molding PA66 today and experience the difference!
COMPANY INFORMATION | |
Our company is a plastic manufacturer and agent for internationally renowned brands: 1. Kunshan Lizhao Plastic Co., Ltd. Was established in 2009 with a registered capital of 21.24 million yuan and an area of 20, 000 square meters. Our company has 14 high-speed production lines and 3 R&D experimental production lines, with a monthly production capacity of 3, 500 tons. Our company specializes in R&D and production of PP PBT PA6 PA66 PPA PC PC/ABS. The company has first-class production equipment and is equipped with professional product laboratories, testing rooms, and sample warehouses. We always adhere to the principle of "quality first" and strive for perfection. Our company has IS09001: 2008 quality system certification and ISO/TS16949-2009 automotive quality system certification. The company starts from selecting the best raw materials and standardizes, processes and institutionalizes product processing. 2. Suzhou Furenxiang Trading Co., Ltd. Was established in 2016 and is committed to the import and export of our own materials and internationally renowned brand materials. Sales brands include: DuPont, Covestro, Polytechnic, Asahi Kasei, Teijin, LG EMS. Model types include: PP PC PC/ABS ABS PPO PBT POM PA6 PA66 PPA LCP TPE TPU ASA PCR (PC/ABS PC/PET), etc. |
