Audited Supplier
Ultrason® E 3010 NAT
Ultrason® PPSU - The Specialty Plastic for High-quality Parts
Ultrason® is especially designed for applications that require high heat resistance it always keeps stiffness and dimensional stability even when used at very high temperatures. Its extraordinary property profile allows all Ultrason® grades to be molded into high-quality, highly stressed parts for high-performance applications in a lot of industries.
3010 NAT
03/2024 PESU
Product description Unreinforced, higher viscosity injection moulding and extrusion grade, tougher and with improved chemical resistance. Abbreviated designation according to ISO 1043-1: PESU
Physical form and storage
Ultrason® pellets are supplied in bags and/or octabins. The bulk density ranges between 700 and 800 g/l. Provided the packaging remains undamaged, Ultrason® can be stored indefinitely. Ultrason® pellets absorb moisture very rapidly. Therefore, the pellets need to be dried at least 4h at 130 °C to 150 °C in a vacuum or dry air drier prior to processing.Product safety
From our experience and information, proper treatment and reasonable use of the product will not have any health hazardous effects.In view of the high temperatures involved in processing Ultrason®, great care must be exercised -even more than for other thermoplastics- in handling the machinery, molds, moldings and residual melts. If there are concerns or doubts on the thermal capacity and limits, the machinery manufacturer should be consulted.
Any product that has decomposed during injection molding must be removed from the barrel by injection into the atmosphere and simultaneous reduction of the barrel temperature. Noxious odors that could form during this procedure can be reduced by rapid cooling of the degraded material, e.g. in a water bath. If the degraded material is not pumped out of the barrel, gas pressure may build up, particularly if nozzle shutoff devices are used. The built-up pressure could then release violently around the nozzle or hopper areas, and explosions would therefore be expected in the course of pumping.
If the normal precautions are taken and the upper temperature limit, i.e. 390°C, is not exceeded, no health hazardous vapors are formed while Ultrason® is being processed. In common with all other thermoplastics, Ultrason® decomposes on exposure to excessive heat, for instance if the melt temperature is too high and/or the residence time in the plasticizing unit is too long or if residues are burned off during cleaning of the machinery. The figures laid down for the maximum allowable dust concentrations (e.g. MAK value in Germany) must be met in further processing.
The work place must be well ventilated, preferably by means of an extraction system installed above the barrel unit. Irrespective of this, all precautions relating to accident prevention must strictly be taken. Under no circumstances may the plasticizing units be dismantled after a breakdown while they are still hot.
Note
The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our product, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the product for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein may Change without prior information and do not constitute the agreed contractual quality of the product. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. In order to ensure supply ability, our products are produced in several production lines on different sites of the Ultrason Group. All production lines produce according to identical specifications. In order to check the availability of products please contact us or our sales agency.Product Information
Test method
Unit
Values2)
| Properties | |||
| Polymer abbreviation | - | - | PESU |
| Density | ISO 1183 | kg/m³ | 1370 |
| Viscosity number (in 0,01 g/ml , ortho-Dichlorbenzol, 1:1) | ISO 307, 1157, 1628 | cm³/g | 66 |
| Water absorption, equilibrium in water at 23°C | similar to ISO 62 | % | 2.2 |
| Moisture absorption, equilibrium 23°C/50% r.h. | similar to ISO 62 | % | 0.8 |
| Glass transition temperature, DSC (10°C/min) | ISO 11357-1/-2 | °C | 228 |
| Processing | |||
| Processing: Injection moulding (M), Extrusion (E), Blow moulding (B) | - | - | M, E, B |
| Melt volume-flow rate MVR 360 °C/10 kg | ISO 1133 | cm³/10min | 35 |
| Melt temperature, injection moulding/extrusion | - | °C | 350 - 390 |
| Mould temperature, injection moulding | - | °C | 140 - 180 |
| Molding shrinkage, parallel | ISO 294-4 | % | 0.85 |
| Molding shrinkage, normal | ISO 294-4 | % | 0.90 |
| Flammability | |||
| UL94 rating at thickness d = 1.5 mm | IEC 60695-11-10 | class | V-0 |
| UL94 rating at thickness d = 3 mm | IEC 60695-11-10 | class | V-0 |
| UL94 rating at thickness d = 1.5 mm | UL-94, IEC 60695 | class | V-0 |
| Mechanical properties | |||
| Tensile modulus | ISO 527-1/-2 | MPa | 2650 |
| Yield stress, 50 mm/min | ISO 527-1/-2 | MPa | 85 |
| Yield strain, 50 mm/min | ISO 527-1/-2 | % | 6.9 |
| Charpy unnotched impact strength (23°C) | ISO 179/1eU | kJ/m² | N |
| Charpy unnotched impact strength (-30°C) | ISO 179/1eU | kJ/m² | N |
| Charpy notched impact strength (23°C) | ISO 179/1eA | kJ/m² | 8 |
| Charpy notched impact strength (-30°C) | ISO 179/1eA | kJ/m² | 8 |
| Izod notched impact strength (23°C) | ISO 180/A | kJ/m² | 8 |
| Izod notched impact strength (-30°C) | ISO 180/A | kJ/m² | 8 |
| Ball indentation hardness at 358 N/30 s | ISO 2039-1 | MPa | 154 |
| Thermal properties | |||
| HDT A (1.80 MPa) | ISO 75-1/-2 | °C | 207 |
| Max. service temperature (short cycle operation) | - | °C | 220 |
| Temperature index at 50% loss of tensile strength after 20000 h | IEC 60216 | °C | 180 |
| Coefficient of linear thermal expansion, longitudinal (23-80°C) | ISO 11359-1/-2 | E-6/K | 52 |
| Coefficient of linear thermal expansion, longitudinal (180°C) | DIN 53752 | E-6/K | 59 |
| Electrical properties | |||
| Relative permittivity (100 Hz) | IEC 62631-2-1 | - | 3.9 |
| Relative permittivity (1 MHz) | IEC 62631-2-1 | - | 3.8 |
| Dissipation factor (100 Hz) | IEC 62631-2-1 | E-4 | 17 |
| Dissipation factor (1 MHz) | IEC 62631-2-1 | E-4 | 140 |
| Electric strength K20/K20 | IEC 60243-1 | kV/mm | 34 |
| Comparative tracking index, CTI, test liquid A | IEC 60112 | - | 125 |
| Comparative tracking index, CTI, test liquid B | IEC 60112 | - | 125 |
| Volume resistivity | IEC 62631-3-1 | Ohm*m | >1E13 |
| Surface resistivity | IEC 62631-3-2 | Ohm | >1E15 |
| Optical properties | |||
| Refractive index (specimen thickness = 1 mm) | ISO 489 | - | 1.630 |
| Degree of light transmission (specimen thickness = 2 mm) | DIN 5036-3 | % | 88 |
The key features of Ultrason® are:
• Temperature-independent properties
• Very high long-term service temperatures
• Good dimensional stability
• Excellent stiffness
• Very good mechanical strength
• High transparency: honey-colored tint
• Good electrical insulation properties
• Favorable dielectric properties
• Very good fire behavior
• Excellent hydrolysis and chemical resistance
Ultrason® can be successfully used for applications in which other plastics, e. g. polyamide, polycarbonate, polyoxymethylene and polyalkylene terephthalates, fail to meet the requirements. By virtue of their extraordinary versatility, Ultrason® resins can substitute thermosets, metals and ceramics in a lot of industries.
Ultrason® for household and catering: stylish, durable and safe
Ultrason® is the ideal material for stylish, durable and safe applications in the household, catering and food packaging sectors. The transparent, high-temperature resistant Ultrason® grades keep their excellent mechanical properties and dimensional stability over a wide temperature range. Because of its unique property profile Ultrason® offers great design freedom, can easily be colored and substitutes glass, metal, ceramic and porcelain. It also contributes to a sustainable lifestyle and circular economy: plates, trays, mugs, bottles and many more household and catering articles made of Ultrason® can be reused many times without loss in mechanical properties and design - the best choice for many to-go applications and multi-cycle food packaging systems!
Ultrason® (PSU, PESU, PPSU) for household and catering:
stylish, durable and safe
The demands on household appliances and catering articles are manifold and uncompromising at the same time: They have to be stylish as well as durable, they should be easy as well as safe in usage and they have to comply to legal regulations.
With its Ultrason® portfolio, Ultrason offers the ideal material for stylish, durable and safe applications in the food packaging and household sectors. The Ultrason® product range comprises polyethersulfone (Ultrason® E), polysulfone (Ultrason® S), and polyphenylsulfone (Ultrason® P) - transparent, high-temperature resistant thermoplastics which keep their excellent mechanical properties and dimensional stability over a wide temperature range.
Because of their unique property profile all Ultrason® grades offer great design freedom, can easily be colored and substitute glass, metal, ceramic and porcelain. What is more: They also contribute to a sustainable lifestyle and circular economy by being reusable many times without loss in mechanical properties and design - ideal for many to-go applications and multi-cycle food packaging systems!
Ultrason® is the solution for your appliances, catering gear and bottles:
• Catering high-heat pans, trays,
bowls and lids
• Parts in household appliances like
coffee machines, water kettles, juicers,
food processors
• Drinking bottles for adults and babies
• Microwavable dishes
• Non-stick coating for cookware and
baking dishes
Crafted with meticulous attention to detail, our GF15 GF20 GF30 Reinforced Resin Engineering Plastic Raw Material Pellet Particles Injection Molding PA66 is truly a masterpiece. Its exceptional quality and durability ensure that it will surpass any inferior materials you may have encountered in the past.
We understand the importance of price to our customers, and we've got you covered. Our competitive prices guarantee that you receive the best value for your money. With us, you don't have to compromise on quality or break the bank. You can have it all.
At Suzhou Furenxiang Trade Co., Ltd., we take great pride in our impeccable service management system. We have gone above and beyond to meet your needs and provide you with outstanding customer service. Your satisfaction is our utmost priority.
We recognize that you have unique requirements, which is why we offer customization options for our GF15 GF20 GF30 Reinforced Resin Engineering Plastic Raw Material Pellet Particles Injection Molding PA66. Tailor the product to your specific needs and make it truly yours.
Don't miss out on this incredible opportunity to revolutionize your projects. Experience the difference today by getting your hands on our GF15 GF20 GF30 Reinforced Resin Engineering Plastic Raw Material Pellet Particles Injection Molding PA66 from Suzhou Furenxiang Trade Co., Ltd.
COMPANY INFORMATION | |
| Our company is a plastic manufacturer and agent for internationally renowned brands: 1. Kunshan Lizhao Plastic Co., Ltd. Was established in 2009 with a registered capital of 21.24 million yuan and an area of 20, 000 square meters. Our company has 14 high-speed production lines and 3 R&D experimental production lines, with a monthly production capacity of 3, 500 tons. Our company specializes in R&D and production of PP PBT PA6 PA66 PPA PC PC/ABS. The company has first-class production equipment and is equipped with professional product laboratories, testing rooms, and sample warehouses. We always adhere to the principle of "quality first" and strive for perfection. Our company has IS09001: 2008 quality system certification and ISO/TS16949-2009 automotive quality system certification. The company starts from selecting the best raw materials and standardizes, processes and institutionalizes product processing. 2. Suzhou Furenxiang Trading Co., Ltd. Was established in 2016 and is committed to the import and export of our own materials and internationally renowned brand materials. Sales brands include: DuPont, Covestro, Polytechnic, Asahi Kasei, Teijin, LG EMS. Model types include: PP PC PC/ABS ABS PPO PBT POM PA6 PA66 PPA LCP TPE TPU ASA PCR (PC/ABS PC/PET), etc. |
