Audited Supplier
Automatic Transmission Oil Machine/ATF Exchanger Equipment Fluid Oil Exchange Flush Cleaning Machine
Model: ATF-20DT
Automatic gearbox cleaning fluid exchanging machine, adopts electronic weighing measurement, with zero-pressure rapid identification, microcomputer control for accurate and equal volume, and internal module design, extremely low failure rate, automatic completion of manually changing the direction of oil in and out of gearbox in a short time, is a powerful equipment for deepening maintenance operations.
| Model | ATF-20DT |
| Power Supply | DC12V |
| Maximum Power | 150w |
| Pressure Gauge | 0-1.5Mpa |
| New/used Fluid Tank | 15L*2 |
| Fluid hose | 2.4m |
| Working Temperature | -10ºC~40ºC |
| Relative Humidity | <85% |
| Noise | <70db |
| Weiht | 31kg |
| Size | 44*55*102cm |
2. With oil cycling flow speed monitor
3. It can shift to oil extracting function automatically after the oil exchanging is completed. The whole progress is fast and high effective
4. Effectively protect the gear-box and remove the grease and impurities in it
2. When the equipment is stored, oil is strictly prohibited in the old and new fuel tanks of the equipment. The old oil should be discharged to other containers immediately after the completion of the equipment work to ensure the accuracy of the equipment exchange
3. When the device is running, it should be placed in a horizontal position
4. During the operation of the equipment, except in emergency situations, the engine should be avoided to turn off and start again, so as to prevent excessive voltage fluctuation when the engine is started, which will affect the equivalent exchange accuracy
5. Personnel should monitor the replacement of the equipment during operation
6. After each use, remove the dust on the equipment and the oil pollution on the pipeline in time
7. Store in a cool, ventilated place
8. Periodically check whether the pipe seals of the ports are good
9. Please keep the oil filter of this equipment clean. It can not be cleaned and recycled
Yantai Lift Equipment Co.,Ltd. is a joint-stock enterprise specializing in a manufacturing and marketing of Wheel alignment, Car lift, Tire changer, Wheel balancer and other auto inspection instruments. Our company has built a reputation for innovation and visionary leadership in the application of the newest technologies to automotive car service equipment.
3D Wheel Alignmennt Machine Car Lift
Tire Changer Machine Wheel Balancer Machine
Trade Terms | FOB / CFR |
MOQ | 3UNITS (USD200.00 extrally charged for LCL shipment to cover the inland freight + custom declaration fee) |
Port | QINGDAO |
Shipment | BY SEA /AIR |
Payment Terms | T/T |
Payment condition | 30% prepayment,balanced before shipment. |
Supply Capability | 1000units/month |
Sample Availability | Yes ,But all freight(Inland freight +seafreight) covered by buyer |
Sample Time | 5-10days(depends on whether have in stock) |
Lead Time | 25-30days(Rush season 5-10days longer) |
Packing | Metal frame&Carton |
Delivery time | 30-45days shipping time (depends on destination position) |
Service | 1% free parts;1year warranty after port of destination |
Q: Are you a factory ?
A: Yes, our factory with an area of 20,000 square meters, specializing in the production of car lift, wheel alignment, tire changer, wheel balancer etc, garage equipment.
Q: Can I have a visit to your company before placing an order ?
A: Sure, welcome to visit our company. There is a showroom in our factory, you can get all what you want about the auto equipment.
Q: How do you control your production quality ?
A: We have an independent QC team. Our QC teams do sample inspection, part inspection during production and 100% final inspection before each shipment.
Q: Can you produce according to the samples ?
A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.
Q: Can you provide the whole workshop automotive equipment ?
A: Yes, we have 8 series contains nearly all automotive equipment. Also we have helped many customers to open their automotive workshop.
Q: May I know the Lead time ?
A: The lead time of our machine is 7 to 30 days. The specific delivery time depends on the items and the quantity of your order.
Q: What is your payment terms ?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
Q: What is your terms of delivery ?
A: EXW, FOB, CFR, CIF, DDU, DDP
Q: How long is the warranty ?
A: Our warranty is 12 months, we will send free parts for replacement in warranty, supply spare parts for lifetime.
Q: How do you make our business long-term and good relationship ?
A: We keep good quality and competitive price to ensure our customers benefit; We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
