High-Precision ODM Service tilting steam jacketed kettle Cooking Pot With Mixer

 

Steam Double
Jacket Kettle
 

Top Lid / Cover

Made of food-grade stainless steel SUS30408
 

The scraper is: four fluorine plates
High temperature resistance 350 ºC
Thickness :20mm;
The stirring device is stainless steel SUS304 thick wall tube welding, and is connected to a self -made connector to facilitate disassembly for cleaning and cleaning
 

Inner pot:Ø1000×5mm,
outer pot:Ø1100×3mm;
Surface polishing achieve : Ra≤0.4μm
T5mm- internal pot;
T3mm- external pot; 3mm- insulation pot;
Tank shape: hemispheroid type;
 

MBC Use a trapezoidal material to avoid flowing from the side
 

SUS304 - 75*45*2
Equipment support
 

Real-time display of pressure of interlayer pan jacket, pressure gauge range 0-0.6Mpa


 

Each kettle is equipped with 4 ground feet, which can be adjusted height
 

 Drive system
Worm wheel: Model 4,
70, 98 teeth, spin to the left;
worm: Model 4, the number of heads 1 head, the spin to the left

Good hydrophobicity, ensure that the distilled water in the heating process of the equipment is quickly discharged out of the pot, so as not to affect the heating efficiency
 

The steam inlet adopts flange ball valve with good sealing and easy operation and maintenance
 

Manometer bend
Stainless steel SUS304
 

Both sets of limit devices are used to improve the safety performance of the equipment
 

Instructions for operation:

1, should be taken before feeding inject a small amount of water in the pot, open the vent valve, and then open the inlet steam valves, stay inside the pot body inter layer cold air free of closed after "vent valve", when the pressure gauge pointer to the device set "work pressure", set "safety valve", to the provisions of this equipment "pressure value, automatic steam, can be closed at this time" into the steam valve, stop the steam supply.

2. Clean the pan and put into the material, slowly open the "inlet valve", and close the "admission valve" when the material reaches the required temperature and the scheduled heating time. Open the drain valve and release the steam to make the pressure inside the inter layer zero. Turn the hand wheel to tilt the pot body, unload the material and complete the operation.

3, each for a job, all should open the drain valve to discharge the condensed water inside the pot body inter layer, such as water inside the sandwich is too big, should check the "vapor barrier drainer" (" hydrophobic ") whether fails, so as to ensure the normal continuity for the heat, so as not to prolong operation time, influence the work efficiency.

4. In order to keep clean, every use should be cleaned once.

5. "pressure gauge", "safety valve", other valves and piping accessories, each class shall conduct a comprehensive inspection to prevent the failure and operation of the disease.

6.The equipment can only be used within the prescribed "work pressure" scope, and the over pressure is not allowed to be used. Otherwise, the user will be conceited.


 

ZHUCHENG MBC INDUSTRIAL & TRADING CO.,LTD Is the professional and original equipment manufacture for the Food processing equipment in the global food processing industry .

Our products are very hot sale and exported well to many foreign counties and created the good and long term cooperation relationships with them , they are mainly located in USA,Canada,India,England,Russia,Italy,Spain,France,Algeria,Middle East,Australia,Singapore,Cuba,Vietnam,Malaysia,Indonesia,Chile,SouthAfrica,Norway,Uzbekistan,Algeria,Pakistan,SaudiArabia,Venezuela,Egypt,Afghanistan,Azerbaijan,Israel,Nigeria,Philippines,SriLanka,Sudan,Thailand,Kenya,Poland,Korea,Pakistan,Mongolia,Rwanda,Cameroon,Iraq,Jordan,Mauritius,Panama etc from Asia, Europe, Africa ,Latin America,South America, North America .

 

Production:
a.) Design: All our machines are elaborately designed by our mechanical engineers who are rich of experience in this field. We accept special design according to customer's request.

b.) Processing & Assembling: Parts processing, assembly, testing are based on standard test.                                                                 
c.) Trial Run: Each machine has to be tested before its deliver

Packing:
It is possible to pack in wooden case or nude pack after wraping by plastic film.

Delivery Time:
Some of our machinery are in stock at our warehouse, generally we need 3~5 days to change the plugs before the delivery. Regarding to the non-stock products, the lead time ~35 days depends on your requirement on the product.

Service & Installation:

a.) Consultation service before, during, and after sales;

b.) Project planning and design services;

c.) Debugging of equipment until everything is functional;

d.) Training of equipment maintenance and operating personally;

e.) Provide 1 year complete warranty and life-time maintenance service. and the fittings can be replaced to new using  the old one.                                                                                                                                                             
f.)Installation and debugging : Seller arranges the engineer to user's factory to install, and help to train 3 operators .After ordering, our company issue drawings and prepared installation, send technicians to the buyer's company for the guide installation and testing on-site, about 3~5 days, the buyer bear the round trip tickets, food and accommodation, and living allowance of $100/day .  

let's talk about our ZHUCHENG MBC complete delivery process:

Before each batch of goods is delivery, we will make a comprehensive container arrangement in advance according to the order quantity and the size, volume and gross weight of each of our food machinery, that is, how many units of goods can be loaded in each container, and where each equipment is installed in the container. All of these are carefully calculated. This way, the calculation is accurate. First, when loading, it can be easily loaded quickly and accurately according to the container arrangement diagram. Then, it is designed in advance to make full use of every bit of space in the container to avoid space waste, which can save and control costs for our customers and friends;

Firstly, all the food machinery we have processed and manufactured will be first inspected by our professional technical inspectors. Professional technical inspection engineers conduct all-round inspections, from a small accessory, screws to welding conditions, welds, welding wires, welds, and the operation of the entire set of equipment. They are all tested by professional technical inspection engineers to ensure our commitment to customers of "quality first";

Secondly, after the relevant details of all food machinery such as equipment and spare parts are inspected, we pack the food equipment. There are two main types of packaging: plastic film packaging, which is mainly for equipment shipped directly in full containers. Plastic film packaging can avoid scratches from dust and small objects, and also saves customers packaging costs and the tediousness of disassembling packaging; one is wooden packaging required by export standards, which is mainly for small equipment and large goods that need to be consolidated.


Then, it is our container loading step, which is also a very important part of the delivery procee . First, check the quality of the container to see if there is any damage or loopholes to avoid rain leakage; then, our professional forklift drivers will deliver the equipment to the door of the container one by one, and then our professional loading workers will move the equipment little by little to the innermost end of the container and arrange them in order. Then it is to fix the equipment, which is a critical step. Please watch our video. Every time ZHUCHENG MBC ships, it uses this special container equipment fixing tool, which is very expensive. Each of our equipment will be reinforced in this way to prevent the container from being damaged by bumps during land and sea transportation.

The last step is to seal the container. After ensuring that everything is OK, our ZHUCHENG MBC factory and Technical Inspection Agency have lead seals to safely seal the container.

During the entire loading process, we have professional inspection agencies to inspect and monitor the loading. Professional staff of Shanghai Xiangstar Technical Inspection Agency come to inspect and monitor the loading, and the equipment is affixed with special tapes and lead seals of the inspection agency.

Well, today we want to share with you the whole set of loading processes, I hope it will be helpful to you, and look forward to your cooperation.

One Time Cooperation, Lifelong Forever Service
Warm welcome you to visit our factory and order machines any time With the ideas of ' Quality first, Honesty, Sincerity,Good service', we will provide you with the perfect quality machines and the professional & lifetime services, thank you so much about your sincerely trust and positively support to us ! Thank you ~ ! 

Every time we meet, there is an unforgettable story ~ 
The reason why our company is called MBC = Fate, we cherish each fate, cherish the acquaintance with any customer and friends.We will guarantee the perfect quality with lifetime services . Warm welcome to visit us at any time. Looking forward to having a chance to meet & WIN-WIN cooperation together.