Audited Supplier
API 8A/8c Drilling Elevators
Type SX Side Door Elevator
| Type SX Side Door Elevator (Applicable square shoulder) | Type | Applicable Pipe Diameter | Rated Load | |
| in | Short Tons | |||
| SX9.5/8"-14" | 9.5/8" | 500 350 | ||
| 9.7/8" | ||||
| 10.3/4" | ||||
| 11.3/4" | ||||
| 12.3/4" | ||||
| 12.7/8" | ||||
| 13.3/8" | ||||
| 13.5/8" | ||||
| 14" | ||||
| SX18.5/8"-20" | 18.5/8" | 350 | ||
| 20" | ||||
| SX36 | 36" | |||
Type SLX Side Door Elevator
| Type SLX Side Door Elevator (Applicable square shoulder) | Type | Applicable Pipe Diameter | Rated Load |
| in | Short Tons | ||
| SLX-65 | 3.1/2"-14.1/4" | 65 | |
| SLX-100 | 2.3/8" -5.3/4" | 100 | |
| SLX-150 | 5.1/2" -13.5/8" | 150 | |
| SLX-250 | 5.1/2" -30" | 250 | |
| SLX-350 | 4.1/2"-14" | 350 |
Type CDZ Drilling Pipe Elevator
| Type CDZ Drilling Pipe Elevator (Applicable 18 degree taper shoulder) | Type | Applicable Joint And Drill Pipe Specifications | Elevator Aperture | Maximum Load | |
| Joint Code | Drill Pipe Specifications And Types | (mm) | |||
| CDZ67 | NC26(2.3/8"IF) | 2.3/8"EU | 67.47 | 150(1350) 250(2250) 350(3150) 500(4500) | |
| CDZ83 | NC31(2.7/8"IF) | 2.7/8"EU | 83.34 | ||
| CDZ101 | NC38(3.1/2"IF) | 3.1/2"EU | 100.81 | ||
| NC40(4"IF) | |||||
| CDZ109 | NC40(4"FH) | 4"IU | 108.74 | ||
| CDZ121 | NC46(4"IF) | 4"EU | 121.44 | ||
| 4.1/2"IU | |||||
| 4.1/2"IEU | |||||
| 4.1/2"FH | 4.1/2"IU | ||||
| 4.1/2"IEU | |||||
| CDZ133 | NC50(4.1/2"IF) | 4.1/2"EU | 133.35 | ||
| 5"IEU | |||||
| 5.1/2"FH | 5"IEU | ||||
| CDZ148 | 5.1/2"FH | 5.1/2"IEU | 147.64 | ||
Type TA Center Latch Elevators
| Type TA Center Latch Elevators (Applicable square shoulder) | Elevator Type | Applicable Pipe Diameter(in) | Rated Load (short tons) | |||
| Drill Collar | Tubing | Casing | ||||
| Not Thickening | External Upset EU | |||||
| TA-35 | 2.7/8" -3.1/8" | 1.05"-2.7/8" | 1.05-2.7/8" | / | 35 | |
| TA-65 | 2.7/8" -3.1/8" | 1.05"-2.7/8" | 1.66-2.7/8" | / | 65 | |
| TA-100 | 3.1/8" -8.5/8" | 2.3/8"-5" | 2.3/8"- 4.1/2" | / | 100 | |
| TA-150 | 4.1/8" -11.1/4" | / | / | 4.1/2" -10.3/4" | 150 | |
Type DD Center Latch Elevators
| Type DD Center Latch Elevators (Applicable square shoulder) | Elevator Type | Clamping Pipe Diameter Size(in) | Rated Load (short tons) | |||
| Drill Collar | Tubing | Casing | ||||
| DD-150 | 2.3/8"-5.1/2" | 2.3/8" -4.1/2" | 4.1/2" -5.1/2" | 150 | ||
| DD-250 | 2.3/8"-5.1/2" | 2.3/8" -4.1/2" | 4.1/2" -5.1/2" | 250 | ||
| DD-350 | 2.3/8"-5.1/2" | 2.3/8" -4.1/2" | 4.1/2" -5.1/2" | 350 | ||
Type DDZ Center Latch Elevators
| Type DDZ Center Latch Elevators (Applicable 18 degree taper shoulder) | Elevator Type | Clamping Pipe Diameter Size(in) | Rated Load (short tons) | Notes | |
| Drill Collar | |||||
| DDZ -100 | 2.3/8"-5" | 100 | MG | ||
| DDZ -150 | 2.3/8"-5.1/2" | 150 | RG | ||
| DDZ -250 | 2.3/8"-5.1/2" | 250 | MGG | ||
| DDZ -350 | 3.1/2"-5.7/8" | 350 | GG | ||
| DDZ -350TD | 3.1/2"-5.7/8" | 350 | For Top Drive | ||
| DDZ -500 | 3.1/2"-6.5/8" | 500 | HGG | ||
| DDZ -500TD | 3.1/2"-6.5/8" | 500 | For Top Drive | ||
| DDZ -750 | 4"-6.5/8" | 750 | |||
Type SP Auxiliary Elevator
| Type SP Auxiliary Elevator (Applicable taper shoulder) | Type | Applicable Pipe Diameter | Rated Load | |
| in | Short Tons | |||
| SP5° | 2.3/8"-10.3/4" | 5 | ||
| SP12° | 2.3/8"-4.1/2" | |||
| SP18° | 2.7/8"-6.5/8" | |||
Type SJ Auxiliary Elevator
| Type SJ Auxiliary Elevator | Type | Clamping Pipe Diameter Size | Rated Load | |||
| in | mm | Short Tons | ||||
| SJ2.3/8"-20 | 2.3/8"-2.7/8" | 60.3-73.03 | 45 | |||
| 3.1/2"-4.3/4" | 88.9-120.7 | |||||
| 5"-5.3/4" | 127-146.1 | |||||
| 6"-7.3/4" | 152.4-193.7 | |||||
| 8.5/8"-10.3/4" | 219.1-273.1 | |||||
| 11.3/4"-13.3/8" | 298.5-339.7 | |||||
| 13.5/8"-14" | 346.1-355.6 | |||||
| 16"-20" | 406.4-508.0 | |||||
| SJ21.1/2"-36 | 21.1/2"-24.1/2" | 546.1-622.3 | 60 | |||
| 26"-28" | 660.4-711.2 | |||||
| 30"-36" | 762.0-914.4 | |||||
Type Y Slips Type Elevators
| Type Y Slips Type Elevators | Type | Clamping Pipe Diameter Size | Rated Load | |
| mm(in) | kN | Short Tons | ||
| HYT | 60.3-88.9 (2.3/8"-3.1/2") | 1350 | 150 | |
| YT | 33.4-88.9 (1.315"-3.1/2") | 675 | 75 | |
| MYT | 33.4-73 (1.315"-2.7/8") | 360 | 40 | |
| LYT | 26.7-52.4 (1.05"-2.1/16") | 180 | 20 | |
| HYC | 88.9-193.7 (3.1/2"-7.5/8") | 1800 | 200 | |
| MYC | 88.9-177.8 (3.1/2"-7") | 1125 | 125 | |
| YC | 88.9-177.8 (3.1/2"-7") | 675 | 75 | |
Type SE Slip Type Elevators/Spiders
| Type SE Slip Type Elevators/Spiders (Pneumatic) | Type | Applicable Pipe Diameter | Rated Load | Working Pressure | Maximum Pressure | |
| inch | Short Tons | Mpa | Mpa | |||
| SE150 | 2.3/8"-5.1/2" | 150 | 0.6-0.8 | 1 | ||
| SE350(14") | 4.1/2"-14 | 350 | 0.6-0.8 | 1 | ||
| SE350(20") | 16"-20" | 350 | 0.6-0.8 | 1 | ||
| SE500(14") | 4.1/2"-14 | 500 | 0.6-0.8 | 1 | ||
| SE500(24.1/2") | 16"-24.1/2" | 500 | 0.6-0.8 | 1 | ||
| SEB250 | 2.3/8" -7.5/8" | 250 | 0.6-0.8 | 1 | ||
Nantong Percent Precision Manufacturing Co., Ltd. was established in 2009, with over a decade of research and experience in producing handling and wellhead tools in petroleum drilling area. We have now manufactured all of the most common product includes Elevators, Slips, Spiders, Manual Tongs, Power Tongs, Dies and Inserts and other products used throughout the world. Our commitment is anchored in three principles: 100% service, 100% product quality, and 100% customer satisfaction
As a comprehensive company with our own factory, Nantong Percent Precision Manufacturing Co., Ltd. specializes in the R&D, production and sales of handling and wellhead tools in petroleum drilling area. With our professional technological innovation capabilities, we are dedicated to providing users with high-quality oil drilling tools and personalized solutions. Our Engineering and Manufacturing Departments are ready to respond to your needs for custom made oil drilling tools for unique applications.
We strive to be the best partner for both domestic and international buyers, and we guarantee you will be satisfied with our products!
1. Do you have OEM service? Do you supply the parts?
Yes, we do, as long as you provide us your drawing and detailed requirements.
2. How can we easily find out the most fit centrifuges?
We have experienced engineer team to help you make the model selection, as long as you proide us the detailed processing material characteristics.
3. What is your advantage compared with your competitors?
Quality and experience. We are the top supplier in China, our designs and structures are similar to world leader , Westfaliar, Flottweg etc.
4. How do you check all the goods in the production line?
A: We have spot inspection and finished product inspection(including magnetic particle inspection, ultrasonic testing and loading testing). We check the goods when they go into next step production procedure.
5. What's the order procedure?
A: First we discuss order details, production details by email. Then we issue you an PI for your confirmation. You will be requested to do prepaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 20-30days if we don't have the items in stock. Before production has been finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.
6. How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T and L/C are the most usual ways we are using.
7. How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit to our customer or replace in next shipment.
