Audited Supplier
This series of mechatronic products are combined by three parts :Micro gear reducer or K Series ,electronic governor ,micro motor capable of operating in reverse direction
Through the different combinations of the three parts ,the whole machine can have different performance .the whole machine can not only use the gearbox to obtain any fixed speed ,but aslo can achieve the goal of stepless speed regulation through electronic speed governor .due to have wind range of reduction ,high force -energy .convenient to use and higher operation reliability ,etc .this series or products are widely used in light industry machinery ,packaging machinery ,food machinery ,textile machinery ,cosmetics (beauty) machinery,printing equipment ,instruments and various automation equipmenbt ,production lines
The micro gear reducer of k series using high precision gear ,the oil seal ,O ring gear box ,the lubricating grease ,with the characteristics of high efficiency .low noise ,long service life ,small volume ,high power ,etc .the product has wide speed range ,the rations are 13-1:1500 ,and can make others according to the customer's special requirements for speed
The micro motors are :Micro AC motor (Single phase :220v ,110v ,etc .three phase :220v ,380v ),ZYT(sz )series of micro Dc motor (Frame size :55-110,voltage :12,24,48,110,220v ) .WZJ series of brushless DC motor
The governor are :US/SS/ AC electronic governor ,the stepless speed governor of WK,SK series .with characteristics of adjustable speed ,no crawing phenomenon
Ensure the frequent positive inversion of the motor ,the motor aslo can be equipped with micro electomagnet brake ,achieve power parking ,accuracy control the stop position
| Model | Rated power (W) | Voltage (V) | Frequency (hz) | Rated speed (Rpm) | Pole (P) | Starting torque (Kg .cm) | Rated torque (Kg.cm) | capacitor (Uf/vac) | Rated time | |
| Ray shaft | gear shaft | |||||||||
| 2lk6A-A | 2IK6GN-A | 6 | 1Φ110 | 50/60 | 1250/1550 | 4 | 0.5 | 0.45 | 3/250 | Cont |
| 2lk6A-A | 2IK6GN-C | 6 | 1Φ220 | 50/60 | 1250/1550 | 4 | 0.5 | 0.45 | 0.8/450 | Cont |
| 2lk6A-A | 2IK10GN-A | 10 | 1Φ110 | 50/60 | 1250/1550 | 4 | 0.65 | 0.74 | 4/250 | Cont |
| 2lk6A-A | 2IK6GN-C | 10 | 1Φ220 | 50/60 | 1250/1550 | 4 | 0.65 | 0.74 | 1/450 | Cont |
| 2RK6A-A | 2RK6GN-A | 6 | 1Φ110 | 50/60 | 1250/1550 | 4 | 0.5 | 0.45 | 4/250 | 30mins |
| 2RK6A-A | 2RK6GN-C | 6 | 1Φ220 | 50/60 | 1250/1550 | 4 | 0.5 | 0.45 | 1/450 | 30mins |
| 2RK6A-A | 2RK10GN-A | 10 | 1Φ110 | 50/60 | 1250/1550 | 4 | 0.6 | 0.7 | 4/250 | 30mins |
| 2RK6A-A | 2RK10GN-C | 10 | 1Φ220 | 50/60 | 1250/1550 | 4 | 0.6 | 0.7 | 1/450 | 30mins |
| 2lk6A-A | 2IK6RGN-A | 6 | 1Φ110 | 50/60 | 90-1250/90-1550 | 4 | 0.5 | 0.5 | 3/250 | Cont |
| 2lk6A-A | 2IK6RGN-C | 6 | 1Φ220 | 50/60 | 90-1250/90-1550 | 4 | 0.5 | 0.5 | 0.8/450 | Cont |
| 2lk6A-A | 2IK10RGN-A | 10 | 1Φ110 | 50/60 | 90-1250/90-1550 | 4 | 0.65 | 0.6 | 4/250 | Cont |
| 2lk6A-A | 2IK10GN-C | 10 | 1Φ220 | 50/60 | 90-1250/90-1550 | 4 | 0.65 | 0.6 | 1/450 | Cont |
| Model | RatedPower(W) | Voltage (V | Frequency (Hz) | Pole (P) | Rated Speed (rpm) | Starting torque (kg.cm | Rated torque (kg.cm) | Rated Current (A) | Capacitor (μF/VAC) | Rated Time | |
| Ray shaft | Gear shaft | ||||||||||
| 3IK15A-A | 3IK15GN-A | 15 | 1Φ110 | 50/60 | 4 | 1250/1550 | 1.1 | 1.18 | 0.31 | 5.0/250 | Cont |
| 3IK15A-C | 3IK15GN-C | 15 | 1Φ220 | 50/60 | 4 | 1250/1550 | 1.1 | 1.18 | 0.16 | 1.2/450 | Cont |
| 3IK20A-A | 3IK20GN-A | 20 | 1Φ110 | 50/60 | 4 | 1250/1550 | 1.4 | 1.6 | 0.4 | 7.0/250 | Cont |
| 3IK20A-C | 3IK20GN-C | 20 | 1Φ220 | 50/60 | 4 | 1250/1550 | 1.4 | 1.6 | 0.2 | 1.5/450 | Cont |
| 3RK15A-A | 3RK15GN-A | 15 | 1Φ110 | 50/60 | 4 | 1250/1550 | 0.95 | 1.1 | 0.36 | 6.0/250 | 3030minutes |
| 3RK15A-C | 3RK15GN-C | 15 | 1Φ220 | 50/60 | 4 | 1250/1550 | 0.95 | 1.1 | 0.19 | 1.5/450 | 3030minutes |
| 3RK20A-A | 3RK20GN-A | 20 | 1Φ110 | 50/60 | 4 | 1250/1550 | 1.3 | 1.5 | 0.42 | 7.0/250 | 3030minutes |
| 3RK20A-C | 3RK20GN-C | 20 | 1Φ220 | 50/60 | 4 | 1250/1550 | 1.3 | 1.5 | 0.21 | 1.8/450 | 3030minutes |
| 3IK15RA-A | 3IK15RGN-A | 15 | 1Φ110 | 50/60 | 4 | 90~1250/90~1550 | 1.1 | 1.2 | 0.31 | 5.0/250 | Cont |
| 3IK15RA-C | 3IK15RGN-C | 15 | 1Φ220 | 50/60 | 4 | 90~1250/90~1550 | 1.1 | 1.2 | 0.16 | 1.2/450 | Cont |
| 3IK20RA-A | 3IK20RGN-A | 20 | 1Φ110 | 50/60 | 4 | 90~1250/90~1550 | 1.4 | 1.5 | 0.4 | 7.0/250 | Cont |
| 3IK20RA-C | 3IK20RGN-C | 20 | 1Φ220 | 50/60 | 4 | 90~1250/90~1550 | 1.4 | 1.5 | 0.2 | 1.5/450 | Cont |
| Model | RatedPower (W) | Voltage(V | Frequency (Hz) | Pole (P) | Rated Speed (rpm) | Starting torque (kg.cm | Rated torque (kg.cm) | Rated Current (A) | Capacitor (μF/VAC) | Rated Time | |
| Ray shaft | Gear shaft | ||||||||||
| 4IK25A-A | 4IK25GN-A | 25 | 1Φ110 | 50/60 | 4 | 1300/1600 | 1.5 | 2.05 | 0.52 | 6.0/250 | Cont |
| 4IK25A-C | 4IK25GN-C | 25 | 1Φ220 | 50/60 | 4 | 1300/1600 | 1.5 | 2.05 | 25 | 1.8/450 | Cont |
| 4IK25A-Y | 4IK25GN-Y | 25 | 3Φ220/380 | 50/60 | 4 | 1300/1600 | 4.7 | 1.8 | 0.2/0.12 | - | Cont |
| 41K30A-A | 4IK30GN-A | 30 | 1Φ110 | 50/60 | 4 | 1300/1600 | 1.9 | 2.3 | 0.65 | 8.0/250 | Cont |
| 4IK30A-C | 4IK30GN-C | 30 | 1Φ220 | 50/60 | 4 | 1300/1600 | 1.9 | 2.3 | 0.33 | 2.0/450 | 30 30minufes |
| 4IK30A-D | 4IK30GN-D | 25 | 1Φ220 | 50 | 4 | 2800 | 1.1 | 0.85 | 0.25 | 2.5/450 | 30 30minutes |
| 4RK25A-A | 4RK25GN-A | 25 | 1Φ110 | 50/60 | 4 | 1300/1600 | 1.4 | 1.9 | 0.52 | 8.0/250 | 30 30minutes |
| 4RK25A-C | 4RK25GN-C | 25 | 1Φ220 | 50/60 | 4 | 1300/1600 | 1.4 | 1.9 | 0.25 | 2.0/450 | 30 30minutes |
| 4RK25A-Y | 4RK25GN-Y | 25 | 3Φ220/380 | 50/60 | 4 | 1300/1600 | 4.5 | 1.9 | 0.2/0.12 | - | Cont |
| 4RK30A-A | 4RK30GN-A | 30 | 1Φ110 | 50/60 | 4 | 1300/1600 | 1.8 | 2 | 0.63 | 8.0/250 | Cont |
| 4RK30A-C | 4RK30GN-C | 30 | 1Φ220 | 50/60 | 4 | 1300/1600 | 1.8 | 2 | 0.31 | 2.0/450 | Cont |
| 4IK25RA-A | 4IK25RGN-A | 25 | 1Φ110 | 50/60 | 4 | 90~1250/90~1550 | 1.5 | 1.9 | 0.52 | 6.0/250 | Cont |
| 4IK25RA-C | 4IK25RGN-C | 25 | 1Φ220 | 50/60 | 4 | 90~1250/90~1550 | 1.5 | 1.9 | 0.25 | 1.5/450 | |
| Model | RatedPower (W) | Voltage (V | Frequency (Hz) | Pole (P) | Rated Speed (rpm) | Starting torque (kg.cm | Rated torque (kg.cm) | Rated Current (A) | Capacitor (μF/VAC) | Rated Time | |
| Ray shaft | Gear shaft | ||||||||||
| 51K40A-A | 51K40GN-A | 40 | 1Φ110 | 50/60 | 4 | 1300/1600 | 2.7 | 3 | 0.65 | 10/250 | Cont |
| 5IK40A-C | 51K40GN-C | 40 | 1Φ220 | 50/60 | 4 | 1300/1600 | 2.7 | 3 | 0.33 | 2.5/450 | Cont |
| 5IK40A-Y | 5IK40GN-Y | 40 | 3Φ220/380 | 50/60 | 4 | 1300/1600 | 9.7 | 3 | 0.31/0.18 | - | Cont |
| 5RK40A-A | 5RK40GN-A | 40 | 1Φ110 | 50/60 | 4 | 1300/1600 | 2.5 | 2.8 | 0.65 | 12/250 | 3030minutes |
| 5RK40A-C | 5RK40GN-C | 40 | 1Φ220 | 50/60 | 4 | 1300/1600 | 2.5 | 2.8 | 0.33 | 3.0/450 | 3030minutes |
| 5RK40A-Y | 5RK40GN-Y | 40 | 3Φ220/380 | 50/60 | 4 | 1300/1600 | 9.5 | 2.8 | 0.31/0.18 | - | 3030minutes |
| 51K40RA-A | 5IK40RGN-A | 40 | 1Φ110 | 50/60 | 4 | 90~1300/90~1600 | 1.7 | 3 | 0.65 | 10/250 | Cont |
| 5IK40RA-C | 5IK40RGN-C | 40 | 1Φ220 | 50/60 | 4 | 90~1300/90~1600 | 1.7 | 3 | 0.33 | 2.5/450 | Cont |
| Model | RatedPower (W) | Voltage (V | Frequency (Hz) | Pole (P) | Rated Speed (rpm) | Starting torque (kg.cm | Rated torque (kg.cm) | Rated Current (A) | Capacitor (μF/VAC) | Rated Time | |
| Ray shaft | Gear shaft | ||||||||||
| 5IK60A-AF | 5IK60GN(GU)-AF | 60 | 1Φ110 | 50/60 | 4 | 1350/1650 | 3.97 | 4.5 | 0.9 | 15/250 | Cont |
| 51K60A-CF | 5IK60GN(GU)-CF | 60 | 1Φ220 | 50/60 | 4 | 1350/1650 | 3.97 | 4.5 | 0.52 | 4/450 | Cont |
| 51K60A-YF | 5IK60GN(GU)-YF | 60 | 3Φ220/380 | 50/60 | 4 | 1350/1650 | 9.7 | 4.5 | 0.31/0.18 | - | Cont |
| 5RK60A-AF | 5RK60GN(GU)-AF | 60 | 1Φ110/220 | 50/60 | 4 | 1350/1650 | 3.8 | 4.3 | 0.52 | 20/250 | 3030minutes |
| 5RK60A-CF | 5RK60GN(GU)-CF | 60 | 1Φ220/220 | 50/60 | 4 | 1350/1650 | 3.8 | 4.3 | 0.9 | 15/250 | 3030minutes |
| 5RK60A-YF | 5RK60GN(GU)-YF | 60 | 3Φ220/380 | 50/60 | 4 | 1350/1650 | 9.5 | 4.3 | 0.31/0.18 | - | 3030minutes |
| 5IK60RA-AF | 5IK60RGN(GU)-AF | 60 | 1Φ110 | 50/60 | 4 | 90~1300/90~1600 | 3.97 | 5 | 0.9 | 15/250 | Cont |
| 5IK60RA-CF | 5IK60RGN(GU)-CF | 60 | 1Φ220 | 50/60 | 4 | 90~1300/90~1600 | 3.97 | 5 | 0.52 | 3.5/450 | Cont |
| Model | RatedPower (W) | Voltage (V | Frequency (Hz) | Pole (P) | Rated Speed (rpm) | Starting torque (kg.cm | Rated torque (kg.cm) | Rated Current (A) | Capacitor (μF/VAC) | Rated Time | |
| Ray shaft | Gear shaft | ||||||||||
| 51K90A-AF | 51K90GN(GU)-AF | 90 | 1Φ110 | 50/60 | 4 | 1350/1650 | 5.8 | 6.7 | 1.2 | 20/250 | Cont |
| 51K90A-CF | 5IK90GN(GU)-CF | 90 | 1Φ220 | 50/60 | 4 | 1350/1650 | 5.8 | 6.7 | 0.58 | 5/450 | Cont |
| 5IK90A-YF | 5IK90GN(GU)-YF | 90 | 3Φ220/380 | 50/60 | 4 | 1350/1650 | 24 | 6.7 | 0.66/0.38 | - | Cont |
| 5IK120A-AF | 5IK120GU-AF | 120 | 1Φ110 | 50/60 | 4 | 1350/1650 | 6.5 | 8.8 | 1.68 | 25/250 | Cont |
| 51K120A-YF | 5IK120GU-YF | 120 | 1Φ220 | 50/60 | 4 | 1350/1650 | 6.5 | 8.8 | 0.81 | 6/450 | Cont |
| 5RK90A-AF | 5RK90GU-AF | 120 | 3Φ220/3.80 | 50/60 | 4 | 1350/1650 | 29 | 8.8 | 0.74/0.43 | - | Cont |
| 5RK90A-AF | 5RK90GU-AF | 90 | 1Φ110 | 50/60 | 4 | 1350/1650 | 5.5 | 6.5 | 1.2 | 25/250 | 3030minutes |
| 5RK90A-CF | 5RK90GU-CF | 90 | 1Φ220 | 50/60 | 4 | 1350/1650 | 5.5 | 6.5 | 0.58 | 6/450 | 3030minutes |
| 5RK90A-YF | 5RK90GU-YF | 90 | 3Φ220/380 | 50/60 | 4 | 1350/1650 | 23 | 6.5 | 0.66/0.38 | - | 3030minutes |
| 5IK90RA-AF | 51K90RAGU-AF | 90 | 1Φ110 | 50/60 | 4 | 90~1300/90~1600 | 5.8 | 7.1 | 1.2 | 20/250 | Cont |
| 5IK90RA-CF | 51K90RGU-CF | 90 | 1Φ220 | 50/60 | 4 | 90~1300/90~1600 | 5.8 | 7.1 | 0.58 | 5.0/450 | Cont |
| 5IK120RA-AF | 51K120RGU-AF | 120 | 1Φ110 | 50/60 | 4 | 90~1300/90~1600 | 6.5 | 7.5 | 1.68 | 25/250 | Cont |
| 5IK120RA-CF | 5IK120RGU-CF | 120 | 1Φ220 | 50/60 | 4 | 90~1300/90~1600 | 6.5 | 7.5 | 0.81 | 7.0/450 | Cont |
| Model | RatedPower (W) | Voltage (V | Frequency (Hz) | Pole (P) | Rated Speed (rpm) | Starting torque (kg.cm | Rated torque (kg.cm) | Rated Current (A) | Capacitor (μF/VAC) | Rated Time | |
| Ray shaft | Gear shaft | ||||||||||
| 6IK120A-AF | 6IK120GN-AF | 120 | 1Φ110 | 50/60 | 4 | 1350/1650 | 9 | 8.9 | 1.62 | 25/250 | Cont |
| 6IK120A-CF | 6IK120GN-CF | 120 | 1Φ220 | 50/60 | 4 | 1350/1650 | 9 | 8.9 | 0.81 | 8/450 | Cont |
| 6IK120A-YF | 6IK120GN-YF | 120 | 3Φ220/380 | 50/60 | 4 | 1350/1650 | 35 | 8.9 | 0.83/0.48 | - | Cont |
| 6IK140A-AF | 6IK140GN-AF | 140 | 1Φ110 | 50/60 | 4 | 1350/1650 | 9 | 11 | 2.35 | 25/250 | Cont |
| 6IK140A-CF | 6IK140GN-CF | 140 | 1Φ220 | 50/60 | 4 | 1350/1650 | 9 | 11 | 1.2 | 8/450 | Cont |
| 6IK140A-YF | 6IK140GN-YF | 140 | 3Φ220/380 | 50/60 | 4 | 1350/1650 | 35 | 11 | 1.12/0.56 | - | Cont |
| 6IK180A-AF | 6IK180GN-AF | 180 | 1Φ110 | 50/60 | 4 | 1350/1650 | 10.02 | 13 | 3 | 30/250 | Cont |
| 6IK180A-CF | 6IK180GN-CF | 180 | 1Φ220 | 50/60 | 4 | 1350/1650 | 10.02 | 13 | 1.3 | 10/450 | Cont |
| 6IK180A-YF | 6IK180GN-YF | 180 | 3Φ220/380 | 50/60 | 4 | 1350/1650 | 40 | 13 | 1.44/0.83 | - | Cont |
| 6IK120RA-AF | 6IK120RGN-AF | 120 | 1Φ110 | 50/60 | 4 | 90~1350/90~1650 | 9 | 7.5 | 1.62 | 2.5/250 | Cont |
| 6IK120RA-CF | 6IK120RGN-CF | 120 | 1Φ220 | 50/60 | 4 | 90~1350/90~1650 | 9 | 7.5 | 0.81 | 8.0/450 | Cont |
| 6IK140RA-AF | 6IK140RGN-AF | 140 | 1Φ110 | 50/60 | 4 | 90~1350/90~1650 | 9.2 | 8.5 | 2.35 | 25/250 | Cont |
| 6IK140RA-CF | 6IK140RGN-CF | 140 | 1Φ220 | 50/60 | 4 | 90~1350/90~1650 | 9.2 | 8.5 | 1.2 | 8.0/450 | Cont |
| 6IK180RA-AF | 6IK180RGN-AF | 180 | 1Φ110 | 50/60 | 4 | 90~1350/90~1650 | 10.2 | 9.5 | 3 | 30/250 | Cont |
| 6IK180RA-CF | 6IK180RGN-CF | 180 | 1Φ220 | 50/60 | 4 | 90~1350/90~1650 | 10.2 | 9.5 | 1.3 | 10/450 | Cont |
company introduction
Zhejiang Dongye Transmission Electromechanical Co., Ltd. Is located in Eastern Wenling New District, which enjoys the convenient transportation of land, air, and sea of the nearby. It is an ideal place for producing and marketing.
Our company's main products consist of YC, YL, YCL, YY, JY, MC, MY single phase induction motors and Y, Y2, Y3,Y4 ,YS, MS, YCT, YB2,YEJ2 series three phase induction motors, NEMA and ghost series motors ,micro gearmotor ,all kinds of speed reducers
We have already got "CE" "CCC" & "ISO 9001" quality certificates.We have been possessed with rich technical ability and guarantee products quality from precision of production and quality management system. We always consider "Best quality, Highest Reputation, Important clients" as our belief.
Sincerely welcome to visit our company, we would like to cooperate with all the customers over the world to create the splendid future.
Exhibition
Our Certificate
Packaging & Shipping
Factory Advantages
1.Professional workman inspecting spare parts every processing.
2.Guaranteed Quality
We have best quality materials to make our electric motors best performance.Our products are 100% brand new , 100% cooper wire. It is newly designed in conformity with the relevant rules of IEC standards, Strictly and Perfect Management is guaranteed for Production
3.Professional Service
We valuing every customer. We'd like to assist you arranging delivery things, test things or others on your request.
4.Fast delivery time, normal model about 15-20 days, another abnormal model about 30 days
5.The company has advanced production lines for winding, painting, assembly and packaging, with beautiful appearance, excellent performance and exquisite packaging.
6.The motor will be 100% checked again before packaging. A motor from out to complete the motor, must pass 15 checks, and 100% test, output power, voltage, current, no-load, 50% load, 75% load, 100% load and check the nameplate, packaging. Final delivery to our customers.
7. We have a professional financial department, they are good at calculating and controlling the cost and capital operation, to provide customers with the most favorable prices.
Our Service
1. We valuing every customer.
2. We cooperate with customer to design and develop new product. Provide OEM.
3. 25-30 days leading time.
4. We'd like to assist you arranging delivery things, test things or others on your request.
Why us?
1. Our manufacturer is a professional motor factory in China
2. Are there any cheap prices in China
3. Rich export experience.
4. 100% quality inspection before shipment
5. Special motor can be designed according to customer requirements
6. Perfect performance, low noise, low vibration, reliable operation, beautiful appearance, small size, light weight, easy maintenance.
7. Reliable in rural, urban or factory environments
8. Sincere and professional service
FAQ
Q: Do you offer OEM service?
A: Yes
Q: What is your payment term?
A: 30% T/T in advance, 70% balance when receiving B/L copy. Or irrevocable L/C.
Q: What is your lead time?A: About 30 days after receiving deposit or original L/C.
Q: What certifiicates do you have?
A: We have CE, ISO. And we can apply for specific certificate for different country such as SONCAP for Nigeria, COI for Iran, SASO for Saudi Arabia, etc
