Audited Supplier
Provided After Sales Service
2 Years
Cement Wall Panel Making Machine
Automatic
Electric
Cement Wall Panel Making Machine
CE, ISO, Cement Wall Panel Making Machine
Customized
Cement Wall Panel Making Machine
2440*610mm
50-200mm
Cement Flyash Sand Water EPS
300000 Sqm Per Year
1000 Sqm
Full and Semi Automation Degree
Qingdao, China
Middle East, South American, African
Jinan City Shandong Province
One Set Mold Car
More Than 14 Years
Engineer Can Provide Formula for You
Formula, Train Workers
Vertical Mold Car and Horizontal Mold Car
Middle East South American
OYADE
Export Standard Package in 40FT Container
based on production capacity
China
6810999000
Product Description
We have overseas sample projects, welcome your visit
we have many successful projects from the Philippines, Malaysia, Cambodia, Qatar, UAE, Syria, Algeria, Russia, Uzbekistan, Australia, Ecuador, Mexico, Bolivia, and so on. 
Building houses at a faster speed is a main trend in every country. So if you are in the construction business, you must be looking for a new type of construction material to replace bricks and blocks!
The Lightweight eps cement panel is the exact product you are looking for!
It has obvious competitive advantages in this industry over bricks and blocks!
1 The weight is lighter
2 The thickness of the wall more thinner
3 More easy to install, take a modular assembly, saving installation time
4 Higher strength, more anti-aging
5 Higher energy efficiency
6 More waterproof The fireproof performance meets the national A standard and it is non-combustible;
1. Fireproof performance
Lightweight partition board under the high temperature of 1000°C, fireproof stands more than 4 hours, and do not send out harmful gas, non-combustible fire-resistant performance reach grade A standard.
2. Waterproof, moisture resistance
Lightweight partition board panel with good performance of waterproof, moisture proof, never appear loose, deformation due to damp, fall off, repair, intensity drops wait for a phenomenon
3. Sound insulation
This product belongs to the lightweight composite structure, the board of internal material, board with board between concave and convex connection is good to attract and with sound insulation function, also has sound insulation and sound-absorbing function, the sound insulation quantity of 120 mm plate is 46db, its sound insulation effect compound sound insulation meets the requirements of national housing, much higher than other masonry wall sound insulation effect.
4. Heat insulation and heat preservation
The lightweight partition board is composed of high purity quartz powder, inorganic fiber, and plant fiber by high temperature and high-pressure steam curing, with its own honeycomb briquet structure ensuring its good thermal insulation function.
5. Quick installation and short construction period
Our lightweight partition board is fully dry operation, 4 m below the height of the wall, and the average skilled workers skills to install 30 square meters a day. And doesn't need a plaster, compared with traditional block efficiency could be improved by more than 13 times. Wall space can arbitrary slot, cutting, increases the use value of the material itself, and greatly reduce the cost of the material. Shorten the period and improve the efficiency.
6. Environmental friendly and energy saving.
Our light wallboard materials do not contain harmful substances, no radiation to humans for 100% sure.
Dear customer, to produce this new types cement panels, its investment is very flexible!
More details of wall panel machine
| Machinery Parameters | |
| Configuration: | Automatic metering system |
| Capacity | 20,000sqm~600,000sqm per year |
| Thickness of cement panels | 50-250mm thickness. |
| Length of cement panels | 2440~3600mm, |
| Width of cement panels | 610mm , |
| Raw materia | There are mainly two different types |
| 1. Cement+fly ash/eps/ceramsite/sand | |
| 2. Foamed cement+additives | |
| Finished board type | 1. Composite board/sandwich board, with surface board |
| 2. Lightweight solid panel, without furface board | |
| Surface board types | 1. Calcium silicate board |
| 2. Fiber cement board | |
| 3. Mgo board | |
There are two kind mold cars:
1 Vertical mold car to produce eps sandwich cement panels and solid cement panels
2 horizontal mold car to produce all the 3 kinds cement panels, especially hollow core kind
Qatar project
He has been in this business the nice 2016 year. In the beginning, he can only produce 100,000 sqm per year. From 2016 year to today, he ordered more than 2 production lines from us to expand production capacity to meet his market demand. Now the total production capacity can reach 1 million sqm per year.
In the Qatar market, with this customer's promotion of lightweight cement panels, the local builders prefer to use this new kind of construction material, rather than using bricks or blocks.
In the 2019 year, our general manager Smile Gao visited this project
Today he just shared with us some pictures from his local market-One big building, In this project, all the internal walls use this kind of cement panels. You can see so big huge demand from his local market.
Ecuador project
This customer visited us in 2017 years and set up the machine line in the 2018 year. He is a very professional engineer in construction material production.
So when he saw our machine and talked with our engineers then he is very confident about us.
Project introduction: https://youtu.be/PKYr10sL0pI
Ecuador customer has been in the construction material business for a long time. In beginning, he imported some cement panels from China. Then when his market demand is much larger, he decided to set up this production line and produce wall panels by himself, as we know the freight cost is much higher.
In 2018 year, he can only produce 140,000 sqm per year. From 2018 year to today, he ordered more machines from us to expand his market demand. Now the total production capacity can reach 200,000 sqm per year.
In the 2018 year, our engineers went to Ecuador to support him in installation, training workers, formula, and so on. Our customer was very satisfied with the engineers' professional ability.
Why EPS cement sandwich panel is more and more popular?
Comparison of EPS Cement Sandwich Panel with AAC Block and Hollow Block Plaster Finished | |||
| EPS Cement Sandwich PANELS | HOLLOW BLOCK PLASTER FINISHED | AAC BLOCK | |
| Compressive Strength-Wall Section (N/mm2) | 5.5 | 1.3 - 3.5 | 3.0 - 4.0 |
| Direct Pull-out (N) | 1800-2000 | Up to 710 | Up to 320 |
| Density (kg/cu.m) | 520 - 810 | 1400 -1900 | 400 - 1000 |
| U Value | 0.4 | 2.3 - 2.8 | 0.3 - 0.4 |
| Fire Rating | 1.5 - 4 hours | Varies | 0 - 4 hours |
| STC Rating | 43 - 60 | Up to 46 | Up to 39 |
| Joint Capacity (kN-m) | 2.53 - 4.66 | 2 - 2.5 | 2 - 2.5 |
| Panel Moment Capacity (kN-m) | 1.99 - 2.96 | N/A | N/A |
| Panel Moment Capacity (side) (kN-m) | 5.58 - 7.15 | N/A | N/A |
| Axial Load Capacity (kN) | 173.8 - 283 | N/A | N/A |
| Plaster Requirement | Not Required | Required | Required |
| Wet Areas | Acceptable | Acceptable | Acceptable |
You could see that the panels are widely used in the buildings, imagine that it could save a lot of time and labor than the bricks and blocks.
- Single Floor House
- Two floor house villa
- Multi-floors steel structure factory building
- Multi-floors concrete structure office building
- Multi-floors concrete structure office building interior partition wall
- Multi-floors concrete structure residential building
- Multi-floors concrete structure shopping mall building
- EPS cement sandwich panel for apartment buildings
- EPS cement sandwich panel for industrial buildings
- EPS cement sandwich panel for commercial buildings
FAQ
| 1. | How to curing the wall panel ? |
| Normally curing time is 8-12hours , it can adjust according to your local temperature , also need natural curing around 25-28days before use it . | |
| 2. | Q: How long is the warranty of your equipment? |
| A: 1year ,but we will provide after-sale service the whole life cycle | |
| 3. | Q: Do you supply spare parts? |
| A: Excellent easy broken parts support for buyers. Easy broken parts guarantee for one year. Other parts we will provide price list in advance . | |
| 4. | Q: Will you provide trainning and formula? |
| A: The training is free of charge , and our engineer will be on duty to train your worker until they know how to produce qualifyed product .Also we will provide you qualified formula | |
| 5. | Q: How will you provide installation&commissioning |
| A: Will provide 2~8persons(adjustable according to the degree of automatic )for installation.Engineers team will go with your project. , besides we only need 15days for commission .in this way can help you save cost on raw material and time . |
Our whole service system for you to support in this business
Business communication→Customer visiting→Layout design→Sign contract→Foundation design & Manufacturing→Inspection&No material testing→Installation→Commissioning
Engineer after sales service
We are a reliable facatory ! Shandong Oyade Machinery Group.
We are a group company from the 2008 year and with factory size of 66000 sqm in Jinan city, Shandong province. We have gained many patents for the cement panels machine.
Dear, the only true manufacturer can ensure you get qualified machine and also we have engineer team, who are responsible for installation, training your workers, formula and so on.
With the qualified machine, this is only the first step for you to produce hollow-core cement panels for your apartment's construction. You also need to consider if we can support you in the formula, spare parts supply, and so on.
For all our customers, most of them we can have a long term cooperation relationship. Such like for our domestic customers, most of them are introduced by our old customers. For example, in this city, we already have a customer using our machine to produce panels. The other customers also want to produce, so he can inquire about which machine from which factory.
Now in China, we are a very famous brand already. If not, we can not sell so many machines in domestic markets. As you know in one Country, the information in the same industry is almost transparent. If our machine and service are not good, our factory can not live from the 2018 year to today.
Contact me freely- Sherry
I am Sherry Sun from Shandong Province, China. I love my family and my job. My son is a lovely and naughty 6 years old boy. With my family's support in my job, I am engaged much more time in my customer service.
For my working experience: my company name is Oyade & Yurui Machinery, China. We are a group company specializing in construction material and production lines.
With more than 6 years in this business, I am a professional in project selection; project research; marketing.
I have rich experience in helping customers do detailed analyses. After the project is confirmed, our professional team will help the customer do the installation, commissioning, and machinery maintenance, help the customer produce the finished product and occupy the market as soon as possible.
In one word, we have the true ability to support customers to set up a new factory successfully! Now with more than 80 countries, we already have successful product lines and customers!
I am Sherry Sun from Shandong Province, China.
I love my family and my job. My son is a lovely and naughty 6 years old boy. With my family's support in my job, I am engaged much more time in my customer service.For my working experience: my company name is Shandong Oyade&Yurui Machinery, China. We are a group company specializing in concrete cement panel production lines since 2008.
Our Brand-OYADE is a famous brand in China and also in global markets.
With more than 6 years in this business, I am a professional in project selection; project research; marketing.
I have rich experience in helping customers do detailed analyses.
After the project is confirmed, our professional team will help the customer do the installation, commissioning, and machinery maintenance, help the customer produce the finished product, and occupy the market as soon as possible.
In one word, we have the true ability to support customers to set up a new factory successfully! Now with more than 80 countries, we already have successful product lines and customers!
