Audited Supplier
YJZWG4 50/66
Insulated
Overhead, Underground
Copper
Composite
Rubber
ISO9001, RoHS, Kema, Enel
GCA
76/132
470, 757
240-1600sq.mm
Wire, Lead sheath, Al-corrugated
Compressed
Composite hollow insulator
Silicone rubber
KEMA
GCA
Carton Box
P. R. China
8546900000
Product Description
72.5kV, 110kV, 132kV High Voltage Outdoor Power Cable Terminations ( Composite )
Composite termination is suitable for indoor and outdoor substations, suitable for busy neighborhoods, no explosion and splash hazards. Dry type (gel-filled) or oil filled type are both available.
• High mechanical strength, the minimum withstand values of cantilever load is 2kN.
• With a certain degree of explosion-proof, no explosion or crack risk.
• Pressure-tight, light weight and less sensitive for outer damage composite housing, convenient to transport, operate and install.
• Pre-fabricated and factory-tested silicone rubber stress cone.
• Silicone rubber rain sheds have excellent anti-pollution performance.
• Filled with silicone gel instead of Si-oil, no oil or gas pressure monitoring system required.
• Suitable for transformer substation both indoor and outdoor.
• Available apply for downtown area or coastal typhoon area.
Features
• Material of Insulator: composite hollow insulator
• stress relief cone: silicone rubber
• Insulation Type: Dry Type(gel-filled)/oil-Filled
• Connection voltage class(kV): ≤145kV
• Conductor connection: compressed
• Cross section range: 240-1600
• Conductor: Copper / Aluminum
• Creepage distance: up to 4500mm
• Cable structure: Wire screen / Al-corrugated sheath / Lead sheath
• Industry Standards: KEMA Type Test in accordance with with IEC60840: 2011
Specification
| Max. operating voltage Um(kV) | 72.5 | 126 | 145 |
| Standards | IEC 60840 | IEC 60840 | IEC 60840 |
| Rated voltage (kV) | 60 - 69 | 110 - 115 | 132 - 138 |
| Rated lightning impulse withstand voltage (BIL) (kV) | 325 | 550 | 650 |
| Partial discharge measurement (pC) | < 5 | < 5 | < 5 |
Features of silicone gel
• Slicone gel instead of Si-oil or Polyisobutene to be filled inside the compsite housing having features below:
• A kind of cross interlink condensate from silicone rubber family with high insulation and excellent physicochemical properties.
• Soft, viscous and soakage material with reliable sticking and compatibility with the interfaces of silicone rubber stress cone, epoxy glass tubing and porcelain.
• No fluidness, no leakage.
• Unformed flexible material thus making compensation for volume change caused by temperature.
• Excellent electrical insulation, more reliable and better performance than silicone oil. A.C. Voltage Withstand and Impact Strength are higher than that of liquid filler. Its Dielectric loss and Dielectric Constant is more adaptable to high voltage. Dielectric strength: 23kV/mm; volume resistance(23°C): 1016Ωm; Dielectric constant (50Hz): 2.8.
•Low heat resistance modulus as coolant for termination, working temperature from -50~180°C.
Application
110kV Outdoor Composited Termination installed in Iran
132kV dry type outdoor composited terminaiton installed in Wuhan Utility
