Audited Supplier
| MODEL | ZKG-62 | ZKG-64 | |
| Maximum conduction angle of Phase-Shift Trigger | ≥170° | ||
| Dimension(mm) | Opening size dimension | 45*45 | |
| Overall dimension(w*h*d) | 48*48*112 | ||
| Power supply | Voltage | 220V AC±10% | |
| Frequency | 50Hz | ||
| Maximum output power (apply to resistive load) | 650W | 1000W | |
| Working environment | Working temperature | -10ºC~50ºC | |
| Relative humidity | ≤ 85% in no corrosive gas occasion | ||
| Radiator | √ | ||
Advantages
△ New design make control and output power integration.
△ Easy operating, the output voltage value can be set by only three keys on panel.
△ The machine is suitable for resistive load, such as heating control for blister or blow molding machine, beating for temperature control equipment.
Wiring Diagram
- Terminals: L,N are the input terminals of the operating power supply of the machine. L is the phase line(commonly known as fire line). N is the zero line(commonly known as the ground line).G,T1:the output of the machine triggers pulse signals.T1 is also the input signal of load voltage feedback.
- External parts: LOAD-load(resistance heating equipment).Resistance is not less than 75Ω. FU-fuse. L,N-outside power supply incoming line, L is phase line(commonly known as fire line) and N is the zero line(commonly known as ground line).
| Model | Maximum power output of load |
| ZKG-62 | 650W(resistance load, resistance value>=75Ω) |
| ZKG-64 | 1000W(resistance load, resistance value>=49Ω) |
1. Connect the meter, module, load, and fuse power supply according to the wiring diagram. The working power must be in common phase(means the same) with the load power, or it will be damaged to the voltage regulator.
2. Fuse FU must be connected to the input end of phase line and shall not be connected to other positions.
3. The thyristor radiator shall be fully considered to avoid electric shock and short circuit between electrodes of the thyristor.
4. Every phase trigger signal wire of SSR-DV connected to voltage regulator should very short and separated from other wires in case of triggering the SSR-DV lose control due to mutual interference.
5. The rated current of SSR-DV must be more than two times the actual current, Large enough radiator, good ventilation and heat dissipation are needed to ensure the temperature of SSR-DV is under 70ºC in any occasion.
6. Suitable load: constant resistance type heating wire, IR infrared ray and UV lamp.
Established in 2007, Shanghai/Huangshan Aoyi Electric Co., Ltd is a manufacturer and trader specialized in the research, production and development of Temperature control electric company. Our products include pointer meters, current and voltage meters, solid state relays, SCR power regulators, voltage regulators and intelligent temperature controller.
We are located in Shanghai, China's trade center, more than 100 outstanding employees. All of our products have obtained CCC, CE and passed ISO9001 international quality standards test. As a result of our excellent products and outstanding customer service, we have established a global sales network reaching China, Southeast Asia, Europe, America and other countries. With the strong support of business cooperation friends around the world like you, Our sales are growing every year, we have achieved sales of tens of millions in 2019, and we will keep it up in the future.
If you are interested in any of our products or would like to place an order, please get free to contact us. We are ready and looking forward to forming successful business relationships with new clients around the world in the near future. Let's achieve success together and take our business one step further
Zhang Qifa, the founder of Shanghai Aoyi Electric Co., Ltd, has been engaged in the temperature control electronics industry for more than 30 years. His business philosophy is quality first, integrity management, scientific and technological innovation, and welcomes friends from outside with excellent products and services.
