Audited Supplier
Application:
1 CA series ordinary horizontal lathe is used to turning internal and external cylindrical surface, conical surface, and other rotating surface, turning various metric and inch, modulus and pitch thread, and the pitch diameter of the thread and pull the drilling and oil tank etc., is general very strong horizontal lathe, Widely applicable batch processing of various shaft and disc parts.
2 The series lathe bed width in general lathe, 400mm rail width has higher stiffness, rail surface by intermediate frequency quenching, wear-resistant durable.
3 Handy machine operator concentration, slide plate is provided with a quick moving mechanism. Using single handle operation, humanization.
4 The rigidity of the machine tool structure and the transmission stiffness are higher than the general lathe, the power utilization rate is high, which is suitable for the strong cutting.
5 Before leaving the machine tool factory, the machine tool is tested strictly according to the inspection procedure, and the machine tool is tested to ensure that the machine tool has good stability and reliability.
Product main technical parameters:
| Specifications | CA6140 CA6140B | CA6240 CA6240B | CA6150 CA6150B CA6150C | CA6250 CA6250B CA6250C | CA6161 CA6161B CA6161C | CA6261 CA6261B CA6261C | CA6166 CA6166B CA6166C | CA6266 CA6266B CA6266C | CA6180 CA6180B CA6180C | CA6280 CA6280B CA6280C | ||||||
| Max. Swing over bed | 400mm | 500mm | 610mm | 660mm | 800 | |||||||||||
| Max. Swing over carriage | 210mm | 300mm | 370mm | 400mm | 540 | |||||||||||
| Max. Swing in gap | -- | 630mm | -- | 720mm | -- | 830mm | -- | 880mm | -- | 1020mm | ||||||
| Effective gap length | -- | 210mm | -- | 210mm | -- | 210mm | -- | 210mm | -- | 210mm | ||||||
| Max. Length of work piece | 750mm/1000mm/1500mm/2000mm/2200mm/3000mm/4000mm | |||||||||||||||
| Width of bed | 400mm | |||||||||||||||
| Section of turning tool | 25X25mm | |||||||||||||||
| Spindle | Spindle speeds | 10-1400rpm/16-1400rpm(24steps) | ||||||||||||||
| Hole through Spindle | 52mm. (80mm). [105mm] | |||||||||||||||
| Spindle taper | MT6(Φ90 1: 20)[Φ113 1: 20] | |||||||||||||||
| Feed | Number of feeds | 64 kinds(for each) | ||||||||||||||
| Range of metric threads | 1-192mm (44kinds) | |||||||||||||||
| Range of inch threads | 2-24tpi (21kinds) | |||||||||||||||
| Range of module threads | 0.25-48(Module39kinds) | |||||||||||||||
| Range of pitch threads | 1-96DP(37kinds) | |||||||||||||||
| Tailstock | Max. Tailstock Spindle travel | 150mm | ||||||||||||||
| Tailstock spindle diameter | 75mm | |||||||||||||||
| Taper of tailstock spindle Center hole | MT5 | |||||||||||||||
| Main motor | 7.5KW(10HP) | |||||||||||||||
| Packing dimensions (L*W*Hmm) | Overall dimensions for750mm | 2550X1140X1750 | 2550X1140X1750 | 2550X1140X1750 | 2550X1140X1750 | 2550X1140X1750 | ||||||||||
| Overall dimensions for1000mm | 2700X1140X1750 | 2700X1140X1750 | 2700X1140X1750 | 2700X1140X1750 | 2700X1140X1750 | |||||||||||
| Overall dimensions for1500mm | 3200X1140X1750 | 3200X1140X1750 | 3200X1140X1750 | 3200X1140X1750 | 3200X1140X1750 | |||||||||||
| Overall dimensions for2000mm | 3700X1140X1750 | 3700X1140X1750 | 3700X1140X1750 | 3700X1140X1750 | 3700X1140X1750 | |||||||||||
| Overall dimensions for2200mm | 4030X1140X1750 | 4030X1140X1750 | 4030X1140X1750 | 4030X1140X1750 | 4030X1140X1750 | |||||||||||
| Overall dimensions for3000mm | 4850X1140X1750 | 4850X1140X1750 | 4850X1140X1750 | 4850X1140X1750 | 4850X1140X1750 | |||||||||||
| Overall dimensions for4000mm | 5800X1140X1750 | 5800X1140X1750 | 5800X1140X1750 | 5800X1140X1750 | 5800X1140X1750 | |||||||||||
| Weight (kg) | Length | G. W N. W. | G. W N. W. | G. W N. W. | G. W N. W. | G. W N. W. | ||||||||||
| Weight for 750mm | 2100 1990 | 2170 2061 | 2300 2180 | 2380 2260 | 2520 2400 | |||||||||||
| Weight for 1000mm | 2190 2070 | 2260 2140 | 2380 2250 | 2570 2450 | 2720 2560 | |||||||||||
| Weight for 1500mm | 2350 2220 | 2420 2290 | 2577 2437 | 2810 2640 | 2980 2800 | |||||||||||
| Weight for 2000mm | 2720 2570 | 2790 2640 | 2940 2787 | 3050 2880 | 3260 3087 | |||||||||||
| Weight for 2200mm | 2800 2600 | 2940 2790 | 3120 2970 | 3390 3180 | 3490 3287 | |||||||||||
| Weight for 3000mm | 3300 3200 | 3450 3300 | 3600 3450 | 3930 3687 | 4200 3887 | |||||||||||
| Weight for 4000mm | 3500 3400 | 3750 3600 | 3950 3800 | 4580 4200 | 4850 4500 | |||||||||||
1: How can I choose the most suitable machines?
A: Please tell me your specifications, we can choose the best model for you, or you can choose the exact model.
You can also send us the products drawing, we will choose the most suitable machines for you.
2: What's your main products of your company?
A: We specialized in all kinds of machines, such as CNC Lathe Machine, CNC Milling Machine, Vertical Machining Center, Lathe Machines, Drilling Machine, Radial Drilling Machine, Sawing Machine, Shaper machine and so on.
3: Where is our factory located? How can I visit there?
A: Our factory is located in Tengzhou City, Shandong Province, 277500 China. You are warmly welcomed to visit us.
4. What is your trade terms?
A: FOB, CFR and CIF all acceptable.
5: What's the Payment Terms?
A: T/T, 30% initial payment when order, 70% balance payment before shipment;
Irrevocable LC at sight.
5: What's the MOQ?
A: 1 set. (Only some low cost machines will be more than 1 set )
