Audited Supplier
HT2
1
1
Turret Lathe
Chuck CNC Lathe
Inclined Guide Rail
Single-tool Holder CNC Lathe
Hydraulic Pressure
CNC
Automatic
Floor-type
High Precision
CE
New
DRC
Packing in Seaworthy Wooden Cases
Dimension(L*W*H): 1600*1500*1750 mm
China
Product Description
Small auto lathe HT2 small high precision cnc lathe machine
Machine Description
HT2 CNC lathe is a two-axis linkage, fully closed-loop CNC machine tool. The machine machine-electric-hydraulic integrated layout adopts a fully enclosed protective cover, the door opens to the left, and the operating table is located on the right end of the fixed protective cover for easy operation. Each servo feed shaft adopts high-speed silent ball screw, elastic coupling is directly connected, fast moving speed, low noise, high positioning accuracy and repeated positioning accuracy; the servo motor is equipped with an absolute value encoder, no cumulative error, no memory, No need to find a reference point, the position information will not be lost after the power is cut off. The machine tool has strong functions, high precision, reasonable layout, beautiful appearance, easy operation and convenient maintenance.
Overall:
The machine tool has a mechanical, electrical, and hydraulic integrated layout. The 45° overall slant bed has the advantages of compact structure, high rigidity, smooth chip removal, and convenient operation. The guide rail type is a rolling guide rail, and the driving parts are high-speed silent ball screws. It has the advantages of fast speed, less heat, and high positioning accuracy; the machine tool is fully enclosed protection, automatic chip removal, automatic lubrication, automatic cooling.
Spindle:
The main drive system of this machine tool is driven by Japanese FANUC 5.5/7.5kw high-performance servo motor, which drives the spindle to rotate through a pair of pulleys. The spindle speed range is 30-5000r/min. The front support of the main shaft adopts three-set high-precision angular contact ball bearings, and the rear support adopts double-row large-aperture high-precision roller bearings to meet the bearing requirements of axial and radial cutting forces.
Turret:
The machine used servo hydraulic turret, with fast tool change speed and high reliability.
Drive:
The X-axis and Z-axis driving adopts FANUC high-performance servo motor, with high positioning accuracy and flexible and reliable action.
System:
The control system is FANUC 0iTF+, using high-performance AC spindle motor and servo motor.
Parameter | ||
Spindle head | type | A2-5 |
Spindle maximum speed | rpm | 5000 |
Spindle power | kW | 5.5-7.5 |
Chuck diameter | mm | 165 |
Spindle bore | mm | 52 |
Front bearing diameter | mm | 80 |
Spindle bearing lubrication | type | Grease |
Linear motion lubrication | type | Oil |
Speed range | rpm | 5-5000 |
Work area | ||
Maximum swing over bed | mm | 520 |
Maximum cutting diameter | mm | 260 |
Suggest Max.cutting diameter | mm | 150 |
Maximum cutting length | mm | 200 |
Travel of Z-axis | mm | 250 |
Travel of X-axis | mm | 150 |
Ball screw | ||
X/Z axis ballscrew DxP | mm | 32 x 10 |
Feed | ||
Rapid traverse Z | m/min | 30 |
Rapid traverse X | m/min | 30 |
Feed force of axis | ||
Feed force X/Z | N | 3200 |
Number of axies | 2 | |
Measuring system | ||
X/Z axis measuring system | Absolute rotative | |
(X / Z);VDI/DGQ 3441 Positioning | mm | 0.006/0.006 |
(X/ Z);VDI/DGQ 3441 Repeatability | mm | 0.004/0.004 |
Tool attachments | ||
Servo turret | type | Pragati |
No.of tool stations | - | 12 |
Turret disk type | - | Slot disk |
Tool attachment | mm | 25 /40 |
Electrical specifications | ||
Voltage | V | 380 ±10% |
Frequency | Hz | 50 ± 1% |
Max. installed power | KVA | 20 |
400v lie protection fuses | A | 63 |
400v line automatic circuit breaker | A | 33 |
Connection cables section | mm2 | 4 x 10 |
Hydraulic unit | ||
Max. working pressure | bar | 35 |
Reservoir capacity | l | 20 |
Pump flow | I/ min | 24 |
Coolant system | ||
Capacity with tank | l | 100 |
Pump delivery | l /min | 30 |
Pump pressure | bar | 5 |
Noise level | ||
Less than | dB (A) | ≤80 |
Control system | ||
FANUC | Fanuc0iT + Manual Guide i | |
Net weight | kg | About 2800 |
Slant angle, Material | ° | 45°, HT300 |
