Audited Supplier
Extraodinary GNSS
The GNSS unit of G7 is integrated with an advanced SoC which is a chip comes with the advantage of high integration and low power consumption, efficiently suppress the interference signals, and obtain higher quality observation data from satellite constellations.
Combines with powerful GNSS RTK engine with 1598 channels, and the new generation high sensitivity antenna, G7 achieves centimeter precision in seconds while fully tracking GPS, GLONASS, BEIDOU, GALILEO and QZSS signals.
Brilliant design
Single button boot design, one button evokes all RTK operations.The body screen adopts a translucent high-strength panel, which has a stronger visual sense of technology. Plus four color indicator lights, common information is clear at a glance.
Smart unit of tilt measurement
An inbuilt high performance IMU automatic compensator which corrects the coordinates to the pole tip, that assists users quickly and accurately measure or stake out points at will without strict leveling the receiver, it helps surveyors boost productivity by 30 percent. Furthermore, the compensation is still available even though the fixed solution is lost at a short time, surveyors are able to continue the job after fixed solution recovers without initializing again for the lMU module. And the tilt angle range can achieve to 60°.
Unlimited productivity
The new generation of SoC platform gives RTK more stable performance and lower power consumption. The built-in 6800mAh high-performance battery can support more than 15 hours of continuous operation. Featuring with a universal type-c interface, G7 allows to charge the built-in batteries with a PD rapid charger, and support power supply from a power bank to ensure a full-day work.
Both internal memory and web interface are accessed by this type-C interface simultaneously without switching working mode for this port.
| Satellite signals tracked simultaneously | |
| Signal tracking | 965 channels |
| GPS: L1, L1C, L2C, L2P, L5 | |
| GLO: G1, G2, G3 | |
| BDS: BDS-2: B1L, B2I, B3I BDS-3: B3I, B1C, B2a, B2b* | |
| GAL: E1, E5A, E5B, E6C, AltBOC* | |
| QZSS: L1, L2C, L5* | |
| SBAS: L1* | |
| IRNSS: L5* | |
| MSS L-Band(Reserve) | |
| Positioning output rate: 1Hz~20Hz | |
| GNSS features | Initialization time: <10s |
| Initialization reliability: >99.99% | |
| Positioning precision | |
| Code differencial GNSS postioning | Horizontal: ±0.25m+1ppm; Vertical: ±0.50m+1ppm |
| SBAS positioning accuracy: Typically<5m 3DRMS | |
| Static GNSS surveying | Horizontal: ±2.5m+0.5ppm; Vertical: ±5mm+0.5ppm |
| Real-time kinematic surveying | Horizontal: ±8m+1ppm; Vertical: ±15mm+1ppm |
| Network RTK | Horizontal: ±8m+0.5ppm; Vertical: ±15mm+0.5ppm |
| IMU tilt angle | 0°~60° |
| User interaction | |
| Operating system | Linux |
| Buttons | One-buttun operation |
| Indicators | 4 indicate lights |
| Web UI | Freely to configure and monitor the receiver by accessing to the web server via WIFI and USB |
| Voice guide | iVoice intelligent voice technology provides status and voice guide |
| Supporting Chinese, English, Korean, Russian, Portuguese, Spainish, Turkish and user define | |
| Secondary development | Providing secondary development package |
| Hardware performance | |
| Dimension | 135mm(Diameter)*84.75mm(Height) |
| Weight | 0.97kg (battery included) |
| Material | Magnesium aluminum alloy shell |
| Operating | -45ºC~+70ºC |
| Storage | -55ºC~+85ºC |
| Humidity | 100% Non-condensing |
| Waterproof / Dustproof | IP67 standard, protected from long time immersion to depth of 1m |
| IP67 standard, fully protected against blowing dust | |
| Shock and vibration | Withstand 2 meters pole drop onto the cement ground naturally |
| Power supply | 9-28V DC, over voltage protection |
| Battery | Internal Li-on, 6800mAh, 3.7V |
| Bettery life | Static mode 10h, rover mode 8h, base mode 8h |
| Communications | |
| I/O port | 5PIN LEMO external power port + RS232, 7PIN external USB(OTG)+Ethernet |
| Communication protocol | Farlink, Trimtalk450s, SOUTH, HUACE, Hi-target, Satel |
| Double module bluetooth | BLEBluetooth 4.0 standard, support for Android, ios cellphone connection |
| Bluetooth 2.1 + EDR standard | |
| NFC communication | Realizing close range (shorter than 10cm) automatic pair between receiver and controller(Controller equipped NFC wireless communication module needed) |
| WIFI | |
| Standard | 802.11 b/g standard |
| WIFI hotspot | The WIFI hotspot allows any mobile terminal to connect and access to the internal webserver for the control and moditor receiver |
| WIFI data link | To work as the datalink that receiver is able to broadcast and receiver differencial data via WIFI |
| Data storage/ Transmission | |
| Data storage | 8GB SSD internal storage |
| Support external USB storage and automatical cycle storage | |
| Changeable record interval, up to 20Hz raw data collection | |
| Data transmission | USB data transmission, supporting FTP/HTTP data collection |
| Data format | Differencial data format: CMR, sCMRx, RTCM2.1, RTCM2.3, RTCM3.0, RTCM3.1, RTCM3.2 |
| GPS output data format: NMEA0183, PJK plane coodinates, Binary code | |
| Network model support: VRS, FKP, MAC, fully support NTRIP protocol | |
| Inertial sensing system | |
| Tilt angle | Up to 60 degrees |
| Electronic bubble | Controller software display electronic bubble, checking leveling status of the centering rod real time |
| Themometer | Built-in thermomter sensors, adopting intelligent temperature control technology which can monitor and adjust the temperature of receiver in real time |
