Audited Supplier
6018
Supply After-Sales Service
2 Years
CE, ISO9001
New
150-200m
10t
Jack-Up
Fixed
Top-Slewing Crane
47.6m
Model 6018 Electric Tower Crane for Construction
152m
1.8ton
95n.M*2units
7.5kw
0-0.665r/Min
45kw
1.68*1.68*2.99m
380V/3p/50Hz
Tavol
40hc Container
power: 380V
China
8426200000
Product Description
Model 6018 electric tower crane for construction
>>>Introduce:
1. It has ultra long arm and large coverage area.
2. The standard segment section is wide. Rigidity is good. Complete machine is
stable and swings slightly when craning.
3. The standard segment principal branch is big.
4. The electrical system uses domestic high quality or importing parts. Its performance is stable and reliable.
5. The standard segment, drawbar, top-bottom turntable and other major components is
welded by CO2 which penetrates deeply and deforms smally.
6. The slewing mechanism adopts winding motor which starts smoothly and reliably and
places conveniently and efficiently.
7. Hoisting mechanism with good performance in speeding, lifting and declining smoothly.
>>>advantages
1.reduce the dismounting requirements, lower weight, low mounting height, dismount each mast at a time in the air, save the labor cost, safety and fast.
2. it is suitable for crossover work of the cranes, without the tower cap and pull rod, the safety will be increased when there need the crossover work.
3. It is suitable for the special requirement about the height, such as airport nearby, tunnel, workshop ,and the construction site with high-tension cable.
4. It is suitable for the construction site that has the requirement about the crane boom, it can be used as internal climbing crane in the high-rise buildings, irregular roof or small areas.
5. It is very convenient for dismounting in the restricted construction site, dismount each crane boom at a time by manual.
6.The steel structure of crane boom has long using life and high safety standard.
7. The crane boom is good applicability, high-usage,the design of the topless tower crane boom is easy for realizing the serialization and standardization. Reduce the design and making cost.
8. Low design cost, short cycle, can much better satisfy the multiple demands of the customers.
>>>Parameter:
>>>what we can supply:
>>>Our company:
Our company mainly focuses on design, manufacture, installation, maintenance, repair,sales, import and export. Our main products areTowerCrane, Construction Hoist, Overhead Crane, Gantry Crane, Jib Crane, Crane Hook, Lift platform and Crane Spare Parts.
We have exported to may countries such as Bangladesh, Vietnam, Thailand, Malaysia, Australia, Kazakhstan, Congo, Ethiopia, Peru, Brazil, Egypt and Iceland and so on.
We would like to satisfy your different kinds of requirement for the Cranes by our First Class Quality with our Excellent Service.
Welcome to visit us!
>>>Package & Delivery:
Package: naked package and wooden package for transportation.40HC container
Shipping: 30days after advance payment
>>>Our service:
1.We can design the customerized tower crane as per your requirement.
2.The most suitable model will be recommended to you once we know about your requirement.
3.Shipment can be arranged from our port to your destination port.
4.Opetion video can be sent to you if needed.
5.Maintenance video will be given once the tower crane break down to help you repair.
Visitor from all over the world:
Installation Team:
>>>FAQ:
1.What should I supply if I want to know the price?
If you want to send inquiry to us, please supply the following parameters:
A.Tip load and Max. load(Ton) of the tower crane
B.Jib length (m)
Then we will supply the price as soon as possible.
2.What kind of payment do you accept?
T/T or L/C on sight
3.How to make the installation? Can you send engineer to us?
We can supply oversea service, it depends on the buyer. There are two choices:
a. If you have professional engineer, you can finish it by yourself. we will send you all the technical documents, such as foundation drawing, installation manual, operation manual.
b. we can send our engineer to guide you on installation. The buyer needs to pay the cost which mainly includes visa application, round-trip tickets, provide accommodation and meal, and allowance for each engineer.
4.What about spare parts?
We can supply quick-wear parts freely. But as for some It is strongly recommended you purchase some shipped along with the equipment.
>>>Introduce:
1. It has ultra long arm and large coverage area.
2. The standard segment section is wide. Rigidity is good. Complete machine is
stable and swings slightly when craning.
3. The standard segment principal branch is big.
4. The electrical system uses domestic high quality or importing parts. Its performance is stable and reliable.
5. The standard segment, drawbar, top-bottom turntable and other major components is
welded by CO2 which penetrates deeply and deforms smally.
6. The slewing mechanism adopts winding motor which starts smoothly and reliably and
places conveniently and efficiently.
7. Hoisting mechanism with good performance in speeding, lifting and declining smoothly.
>>>advantages
1.reduce the dismounting requirements, lower weight, low mounting height, dismount each mast at a time in the air, save the labor cost, safety and fast.
2. it is suitable for crossover work of the cranes, without the tower cap and pull rod, the safety will be increased when there need the crossover work.
3. It is suitable for the special requirement about the height, such as airport nearby, tunnel, workshop ,and the construction site with high-tension cable.
4. It is suitable for the construction site that has the requirement about the crane boom, it can be used as internal climbing crane in the high-rise buildings, irregular roof or small areas.
5. It is very convenient for dismounting in the restricted construction site, dismount each crane boom at a time by manual.
6.The steel structure of crane boom has long using life and high safety standard.
7. The crane boom is good applicability, high-usage,the design of the topless tower crane boom is easy for realizing the serialization and standardization. Reduce the design and making cost.
8. Low design cost, short cycle, can much better satisfy the multiple demands of the customers.
>>>Parameter:
| Standard Model | 6018 | |
| Max. Lift Load | 10t | |
| Tip Load | 1.8t | |
| Free Standing Height | 47.6m | |
| Max. Anchorage Height | 152m | |
| Jib Length | 60m | |
| Mast size | 1.6×1.6×2.5m | |
| Lift Mechanism | Lifting Speed | (a=2)5.4/27/45/67.5/90 m/min (a=4)2.7/13.5/22.5/33.75/45m/min |
| Lift motor | 45kw | |
| Wire rope diameter | 16mm | |
| Trolley Mechanism | Trolley speed | 0-65 m/min |
| Trolley Motor | 5.5kw | |
| Slewing Mechanism | Slewing speed | 0-0.665r/min |
| Slew Motor | 95N.m*2units | |
| Jacking Mechanism | Jack climbing speed | 0.4m/min |
| Jack climbing motor | 7.5kw | |
| Voltage | 380V/50Hz/3P | |
| Luxury Operate Cabin, Schneider Electric Parts | ||
| Model | Standard model | Jib length (m) | Free standing height(m) | Max. load(t) | Max. Tip load(t) | Mast section size(m) | Container Quantity(40HC) |
| QTZ50 | 5010 | 50 | 30 | 4.0 | 1.0 | 1.6x1.6x2.5 Material: ∠160×160×14 | 4(7mast+1) |
| QTZ80 | 5610 | 56 | 40 | 6.0 | 1.0 | 1.6x1.6x2.5 Material:135×135×12square tube | 6(6mast+1) |
| QTZ80 | 5510 | 55 | 41.5 | 6.0 | 1.0 | 1.68×1.68×2.99 Material:L160X16/Q345B | 7(12mast+1) |
| QTZ80 | 6010 | 60 | 41.6 | 8.0 | 1.0 | 1.68×1.68×2.99 Material:L160X16/Q345B | 7(12mast+1) |
| QTZ125 | 6018 | 60 | 47.6 | 10 | 1.8 | 1.68×1.68×2.99 Material:L180X18/Q345B | 7(12mast+1) |
| QTZ125 | 6515 | 65 | 60.8 | 10 | 1.5 | 2.0×2.0×2.99 Material: L180X18/Q345B | 7(12mast+1) |
>>>Our company:
Our company mainly focuses on design, manufacture, installation, maintenance, repair,sales, import and export. Our main products areTowerCrane, Construction Hoist, Overhead Crane, Gantry Crane, Jib Crane, Crane Hook, Lift platform and Crane Spare Parts.
We have exported to may countries such as Bangladesh, Vietnam, Thailand, Malaysia, Australia, Kazakhstan, Congo, Ethiopia, Peru, Brazil, Egypt and Iceland and so on.
We would like to satisfy your different kinds of requirement for the Cranes by our First Class Quality with our Excellent Service.
Welcome to visit us!
>>>Package & Delivery:
Package: naked package and wooden package for transportation.40HC container
Shipping: 30days after advance payment
>>>Our service:
1.We can design the customerized tower crane as per your requirement.
2.The most suitable model will be recommended to you once we know about your requirement.
3.Shipment can be arranged from our port to your destination port.
4.Opetion video can be sent to you if needed.
5.Maintenance video will be given once the tower crane break down to help you repair.
Visitor from all over the world:
Installation Team:
>>>FAQ:
1.What should I supply if I want to know the price?
If you want to send inquiry to us, please supply the following parameters:
A.Tip load and Max. load(Ton) of the tower crane
B.Jib length (m)
Then we will supply the price as soon as possible.
2.What kind of payment do you accept?
T/T or L/C on sight
3.How to make the installation? Can you send engineer to us?
We can supply oversea service, it depends on the buyer. There are two choices:
a. If you have professional engineer, you can finish it by yourself. we will send you all the technical documents, such as foundation drawing, installation manual, operation manual.
b. we can send our engineer to guide you on installation. The buyer needs to pay the cost which mainly includes visa application, round-trip tickets, provide accommodation and meal, and allowance for each engineer.
4.What about spare parts?
We can supply quick-wear parts freely. But as for some It is strongly recommended you purchase some shipped along with the equipment.
