Audited Supplier
8/6F-NAHR
After Sales Service
1 Year
80-110m
>400 L/min
Motor
Single-Stage Pump
High Pressure Pump
Single Suction Pump
Horizontal Pump
Horizontal Split Pumps
Suction Centrifugal
Closed
Pump, Pumps, Condensate Pump, Slurry Pump, Circulating Pump
Cantilevered Slurry Pump
Mining Slurry Pump
Slurry Pump
12.6m3/H-5400m3/H
0-68m
Expeller Seal/Packing Seal/Mechanical Seal
Cvz/Dcz/Zvz/Crz
High Chrome Alloy/Rubber Lined
1 Inch-18 Inches
Metallurgy Mining
Ball Mill Discharge
Flotation
Ni Hard Slurry
Bottom/ Fly Ash, Lime Grinding
Mineral Sands
Naipu
Wooden Case
CE, ISO, SGS
China
8413701090
Product Description
6 Inch Closed Impeller Mud Pump Slurry Pump Chemical Pump for Sag Discharge
Model Notation
1.5/1B-NP
1.5: Intake size (inch)
1: Discharge size (inch)
B: Frame type
NP-AH Slurry Pump Performance Parameters
Feature
Type AH,HH,M Pump are cantilevered, horizontal, centrifugal slurry pump. They are designed for the handing high density slurries in the metallurgical, mining , coal, power, building material and other industrial department etc.
The frame plates liner and impeller for type AH,HH,M pumps have replaceable wear-resistant metal liners or rubber liners.
The shaft seals for type AH,M, and HH Pump may be adoptable of gland seal , expeller seal or Mechanical seal .
The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
Bearing assembly use cylindrical structure, which helps adjust the space between impeller and cover plate liner easily, and being removed completely when being repaired. Bearings use grease lubrication. Here are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices.
Wide performance, good NPSH and high efficiency, the pump of this type may be installed in multistage series to meet the delivery for long distance.
Application
AH,HH,M pumps are using for handing strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc.
For example: Coal washery processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station.
Typical Application
Product Overview
Naipu Main Pump Type
Metal Liner Heavy Duty Slurry Pump AH Type
1.5/1B-AH 2/1.5B-AH 3/2C-AH 3/2CC-AH 4/3C-AH 4/3CC-AH 4/3D-AH 4/3DD-AH 6/4D-AH 6/4DD-AH 6/4E-AH 6/4EE-AH 8/6E-AH 8/6EE-AH 8/6F-AH 8/6FF-AH 8/6R-AH 10/8ST-AH 10/8F-AH 10/8FF-AH 12/10ST-AH 12/10G-AH 12/10F-AH 12/10FF-AH 14/12ST-AH 14/12G-AH 14/12FF-AH 14/12F-AH 16/14TU-AH 20/18TV-AH
Rubber Liner Heavy Duty Slurry Pump AH Type
1.5/1B-AHR 2/1.5B-AHR 3/2C-AHR 3/2CC-AHR 4/3C-AHR 4/3CC-AHR 4/3D-AHR 4/3DD-AHR 6/4D-AHR 6/4DD-AHR 6/4E-AHR 6/4EE-AHR 8/6E-AHR 8/6EE-AHR 8/6F-AHR 8/6FF-AHR 8/6R-AHR 10/8F-AHR 10/8X-AHR 12/10ST-AHR 14/12ST-AHR 16/14TU-AHR
Metal Liner Vertical Slurry Pump SP Type
40PV-SP 65QV-SP 100RV-SP 150SV-SP 200SV-SP 250SV-SP
Rubber Liner Vertical Slurry Pump SP Type
40PV-SPR 65QV-SPR 100RV-SPR 150SV-SPR 200SV-SPR
Metal Liner High Head slurry pump HH Type
1.5/1C-HH 3/2D-HH 3/2DD-HH 4/3E-HH 4/3EE-HH 6/4F-HH 6/4FF-HH 6/4x- HH 6S-H 8/6S-H 8/6X-H 6S-HP 8/6S-HP 8/6X-HP
Metal Liner (Rubber Liner)Slurry Pump M Type
10/8E-M(R) 10/8R-M(R
Metal Liner Gravel Sand Pump G Type
6/4D-G 6/4DD-G 6/4E-G 8/6E-G 8/6EE-G 10/8F-G 10/8FF-G 10/8S-G 12/10F-G 12/10FF-G 12/10G-G 14/12F-G 14/12FF-G 14/12G-G 10/8S-GH 10/8F-GH 10/8FF-GH 12/10G-GH 12/10F-GH 12/10FF-GH 14/12G-G 14/12T-G 18/16 T-G
Metal Liner (Rubber Liner)Frothy Slurry Pump AF Type
2QV-AF(R) 3QV-AF(R) 6SV-AF(R) 8SV-AF(R)
Workshop Show
We are factory of Slurry Pumps ,Sand Gravel Pumps,Dredging Pumps etc.
We have Mould Workshop,Casting Workshop,Machining Workshop,Testing workshop,and Assembly Workshop etc.
Our pumps can be 100% interchangeable with AH HH G SP L M series.
We also undertake OEM service if you supply us drawings or samples.
Contact US
Contact Person: Karen Tan
Model Notation
1.5/1B-NP
1.5: Intake size (inch)
1: Discharge size (inch)
B: Frame type
NP-AH Slurry Pump Performance Parameters
| Type | Allowable Mating Max. Power(Kw) | Clear Water Performance | Impeller | ||||||
| Material | Capacity/Q m³/hr | Head/m | Speed | Max Eff% | NPSH/m | Nos of Vane | Impeller Diameter/ | ||
| rpm | mm | ||||||||
| 1.5/1-NP-AH | 15 | M | 12.6--28.8 | 6--68 | 1200--3800 | 40 | 2--4 | 5 | 152 |
| R | 10.8-25.2 | 7-52 | 1400-3400 | 35 | 3 | ||||
| 2X1.5-NP-AH | 15 | M | 32.4--72 | 6--58 | 1200--3200 | 45 | 3.5--8 | 5 | 184 |
| R | 25.2-54 | 5.5-41 | 1000-2600 | 50 | 2.5-5 | 178 | |||
| 3X2-NP-AH | 30 | M | 39.6--86.4 | 12--64 | 1300--2700 | 55 | 4--6 | 5 | 214 |
| R | 36-75.6 | 13-39 | 1300-2100 | 55 | 2--4 | 213 | |||
| 4X3-NP-AH | 30 | M | 86.4--198 | 9--52 | 1000--2200 | 71 | 4--6 | 5 | 245 |
| R | 79.2-180 | 5-34.5 | 800-1800 | 59 | 3--5 | ||||
| 6X4-NP-AH | 60 | M | 162--360 | 12--56 | 800--1550 | 65 | 5--8 | 5 | 365 |
| R | 144-324 | 12-45 | 800-1350 | 65 | 3--5 | ||||
| 8X6-NP-AH | 300 | M | 360--828 | 10--61 | 500--1140 | 72 | 2--9 | 5 | 510 |
| R | 324-720 | 7-49 | 400-1000 | 65 | 5--10 | ||||
| 10X8-NP-AH | 560 | M | 612--1368 | 11--61 | 400--850 | 71 | 4--10 | 5 | 686 |
| R | 540-1188 | 12-50 | 400-750 | 75 | 4--12 | ||||
| 12X10-NP-AH | 560 | M | 936--1980 | 7--68 | 300--800 | 82 | 6 | 5 | 762 |
| R | 720-1620 | 7-45 | 300-650 | 80 | 2.5-7.5 | ||||
| 14X12-NP-AH | 560 | M | 1260--2772 | 13--63 | 300--600 | 77 | 3--10 | 5 | 965 |
| R | 1152-2520 | 13-44 | 300-500 | 79 | 3--8 | ||||
| 16X14-NP-AH | 1200 | M | 1368--3060 | 11--63 | 250--550 | 79 | 4--10 | 5 | 1067 |
| 20X18-NP-AH | 1200 | M | 2520--5400 | 13--57 | 200--400 | 85 | 5--10 | 5 | 1370 |
Feature
Type AH,HH,M Pump are cantilevered, horizontal, centrifugal slurry pump. They are designed for the handing high density slurries in the metallurgical, mining , coal, power, building material and other industrial department etc.
The frame plates liner and impeller for type AH,HH,M pumps have replaceable wear-resistant metal liners or rubber liners.
The shaft seals for type AH,M, and HH Pump may be adoptable of gland seal , expeller seal or Mechanical seal .
The discharge branch can be positioned at intervals of 45 degrees by request and oriented to any eight positions to suit installations and applications.
Bearing assembly use cylindrical structure, which helps adjust the space between impeller and cover plate liner easily, and being removed completely when being repaired. Bearings use grease lubrication. Here are the drive types, such as V belt drive, gear reducer drive, fluid coupling drive, and frequency conversion drive devices.
Wide performance, good NPSH and high efficiency, the pump of this type may be installed in multistage series to meet the delivery for long distance.
Application
AH,HH,M pumps are using for handing strong abrasive, high density slurries and low density, high head slurries in the metallurgical, mining, coal, power, building material and other industrial departments etc.
For example: Coal washery processing, handling with the fine ore and tailings in metal mine, handing combined bottom and fly ash in a thermal power station.
Typical Application
| Ball mill discharge | Bottom/fly ash, lime grinding | Coal | Coarse sand |
| Coarse tailings | Dredging | FGD | Fine tailings |
| Flotation | Heavy media | Minerals concentrate | Mineral sands |
| Ni acid slurry | Oil sands | Phosphoric acid | Phosphate matrix |
| Process chemical | Pulp and paper | Rod mill discharge | SAG mill discharge |
| Wet crushers | Alumina | Copper | Molybdenum |
| Iron Ore | Gold | Lead &zinc | Silver |
| Bauxite | Titanium | Steel | Sand & Gravel |
Product Overview
Naipu Main Pump Type
Metal Liner Heavy Duty Slurry Pump AH Type
1.5/1B-AH 2/1.5B-AH 3/2C-AH 3/2CC-AH 4/3C-AH 4/3CC-AH 4/3D-AH 4/3DD-AH 6/4D-AH 6/4DD-AH 6/4E-AH 6/4EE-AH 8/6E-AH 8/6EE-AH 8/6F-AH 8/6FF-AH 8/6R-AH 10/8ST-AH 10/8F-AH 10/8FF-AH 12/10ST-AH 12/10G-AH 12/10F-AH 12/10FF-AH 14/12ST-AH 14/12G-AH 14/12FF-AH 14/12F-AH 16/14TU-AH 20/18TV-AH
Rubber Liner Heavy Duty Slurry Pump AH Type
1.5/1B-AHR 2/1.5B-AHR 3/2C-AHR 3/2CC-AHR 4/3C-AHR 4/3CC-AHR 4/3D-AHR 4/3DD-AHR 6/4D-AHR 6/4DD-AHR 6/4E-AHR 6/4EE-AHR 8/6E-AHR 8/6EE-AHR 8/6F-AHR 8/6FF-AHR 8/6R-AHR 10/8F-AHR 10/8X-AHR 12/10ST-AHR 14/12ST-AHR 16/14TU-AHR
Metal Liner Vertical Slurry Pump SP Type
40PV-SP 65QV-SP 100RV-SP 150SV-SP 200SV-SP 250SV-SP
Rubber Liner Vertical Slurry Pump SP Type
40PV-SPR 65QV-SPR 100RV-SPR 150SV-SPR 200SV-SPR
Metal Liner High Head slurry pump HH Type
1.5/1C-HH 3/2D-HH 3/2DD-HH 4/3E-HH 4/3EE-HH 6/4F-HH 6/4FF-HH 6/4x- HH 6S-H 8/6S-H 8/6X-H 6S-HP 8/6S-HP 8/6X-HP
Metal Liner (Rubber Liner)Slurry Pump M Type
10/8E-M(R) 10/8R-M(R
Metal Liner Gravel Sand Pump G Type
6/4D-G 6/4DD-G 6/4E-G 8/6E-G 8/6EE-G 10/8F-G 10/8FF-G 10/8S-G 12/10F-G 12/10FF-G 12/10G-G 14/12F-G 14/12FF-G 14/12G-G 10/8S-GH 10/8F-GH 10/8FF-GH 12/10G-GH 12/10F-GH 12/10FF-GH 14/12G-G 14/12T-G 18/16 T-G
Metal Liner (Rubber Liner)Frothy Slurry Pump AF Type
2QV-AF(R) 3QV-AF(R) 6SV-AF(R) 8SV-AF(R)
| Shijiazhuang Naipu Pump Co.,Ltd | |||
| Pump type | Performance | Main Application | Feature |
| NP-AH Slurry Pump | Capacity:0-5300 m3/h Head:0-70m Discharge:1-18 Inch Power: Motor/Diesel Material: High Chrome alloy or Nature Rubber DriveType: ZVZ/CRZ/CV/DC Liquid temperature up to 90°C | Minerals Flotation Processing Electric Factory Coal Preparation Coal Washing Chemical Medium Processing Effluent Handling Sand And Gravel Handling | 1.Type NAH slurry pumps are cantilevered,horizontal,centrifugal pumps 2.Fully Interchange with world Famous Brand 3. Made Anti wear and Anti-corrosive Material 4. Can installed in multistage series |
| NP-M Medium Duty Slurry Pump | Capacity:540-1228 m3/h Head:15-61m Discharge:8 Inch Power: Motor/Diesel Material: High Chrome alloy or Nature Rubber Drive Type: ZVZ/CRZ/CV/DC Liquid temperature up to 90°C | Dense media transfer Dense media make-up Bottom boiler and fly ash Ferrosilicon make up Thickener underflow Dewatering | 1. slurry pumps and spare parts could fully interchange with world famous brand. 2. Can installed in multistage series 3. designed for continuous pumping of highly abrasive and corrosive slurries. |
| NP-HH High Head Slurry Pump | Capacity:16.2-1008 m3/h Head:25-118m Discharge:1-6Inch Power: Motor/Diesel Material: High Chrome alloy Drive Type: ZVZ/CRZ/CV/DC Liquid temperature up to 90°C | Tailings Delivery Cyclone Feed Diamond Concentrate Slag Granulation Bottom Boiler and Fly Ash Mill Discharge | 4. Designed to produce high heads per stage at high Pressures. 5. Capable of handing medium size particles and pumping at heads in excess of 90m per stage 6. Adoptable of gland seal or expeller Seal 7. Can installed in multistage series |
| NP-D Low-Abrasive Slurry Pump | Capacity:2.34-7920 m3/h Head:6-50m Discharge:20-550mm Power: Motor/Diesel Material: High Chrome/ Rubber Drive Type: ZVZ/CRZ/CV/DC | Chemical Process Heavy Minerals Plant Water Supply Thickener Overflow Paper and Pulp Slag Granulation | 1. Attractive initial cost. 2. High speed Operation 3. Small Volumes saving floor Area 4. Gland Seal And Centrifugal Seal |
| NP-G Gravel Pump | Capacity:36-2232m3/h Head:6-77m Discharge:4-14inch Power: Motor/Diesel Material: High Chrome/NI-Hard Drive Type: ZVZ/CRZ/CV/DC | Slag Granulation Suction Hopper Dredging Dredging Barge Loading Sand Reclamation Sugar Beet | 1.Single Casing, Wide Wet Passage 2.designed for continuous pumping of extremely aggressive slurries 3.Easy Installation and operation, 4.Good performance of NPSH And Abrasion-resistance 5.Type ZJSH Pump are of high head ones |
| NP-ZJG Slurry Pump | Capacity:15.8-342.3L/S Head:20-100M m Discharge:65-300mm Power: Motor/Diesel Material: High Chrome/NI-Hard Drive Type: CRZ Max Pressure: 3.6Mpa | Handling The Mixture Abrasive Solids Electric Power Metallurgy Mine Coal Constructional Material Chemical Industry | 1.CAD modern design,super hydraulic performance,high efficiency and lower abrasion rate 2.Wide passage, non-clogging and good performance of NPSH; 3. Free of leakage; 4.Reliability design 5.Can be Installed Multistage |
| NP-ZG Slurry Pump | Capacity: 90-2400m3/h Head:6-135mm Discharge:40-300mm Power: Motor/Diesel Material: High Chrome Drive Type: CRZ/DCZ/ZVZ/CV | Electric Power Constructional Material Mine Coal Coal washing Sand Reclamation Sugar Beet | 1.Used international advanced solid-liquid two-phase flow theory 2.Lower noise and vibration 3.Long service life 4.concentration of weight: 45%(ash) 60%() |
| WS Dredging Pump | Capacity: 180-25000m3/h Head:25-76mm Discharge:100-1000mm Power: Motor/Diesel Material: High Chrome Drive Type: DCZ | Suction Hopper Dredging Constructional Material Sand gravel processing Barge Loading Sand Reclamation Dredging and damming of the river and sea | 1.Light weight,good wear-resistant, Super dredging performance 2. Suited for the dredge on the whole construction ,high multiple economy benefits and so on . 3. It throughout meets requirements of the dredge to dredging pumps |
| NP-ZJW Feeding pumps | Capacity: 30-305m3/h Head:43.5-91.8mm Discharge:50-125mm Power: Motor Material: High Chrome Drive Type: DC | coal washery, environmental protection, aluminum factory, smelting plant etc. | 1.ZJW series filter press feeding pump accept unique hydraulic design and installation mode of the impeller 2.Use in the filter press feed 3. large capacity, low pressure feeding and low capacity,high pressure filter. |
| NP-SP Vertical Slurry Pump | Capacity: 5.4-247.5L/S Head:4.5-37m Discharge:40-200mm Power: Motor Material: High Chrome/Rubber Drive Type: DC/BD | Sump drainage washdown Floor drainage Mill sumps Carbon transfer Monitoring Magnetite mixing | 1.Vertical, centrifugal slurry pumps submerged in sump to work. 2.No need of any shaft seal and sealing water. 3.Can also be operated normally for insufficient suction duties |
| NP-ZJQ submersible Slurry pump | Capacity: 25-2000M3/H Head:12-60m Discharge:80-400mm Power: Motor Material: Hard Metal | Delivering Liquid Sand, Coal Cinder Solid Clearing The Mud In Lake, River, Sea Dredging Widening Channel | 1.The pump adopts excellent material, advanced structure, and it is with wide flowing passage & strong delivery ability. 2.The hydraulic parts are wear-resistant. |
| NP-AHF froth Pump | Capacity: 7.2-330 M3/H Head:5-30m Discharge:50-150mm Power: Motor Material:High Chrome/rubber | Minerals Flotation Processing Handle Frothy Slurries | 1.Designed for continuous pumping of highly abrasive and corrosive frothy slurries 2.They have a vertical shaft configuration, and comprise a hopper, with vertical Bearing Assembly, |
Workshop Show
We are factory of Slurry Pumps ,Sand Gravel Pumps,Dredging Pumps etc.
We have Mould Workshop,Casting Workshop,Machining Workshop,Testing workshop,and Assembly Workshop etc.
Our pumps can be 100% interchangeable with AH HH G SP L M series.
We also undertake OEM service if you supply us drawings or samples.
Naipu Other Pump Parts
Main Slurry Pump Parts : Impeller , Volute Liner , Casing , Throat Bush, Frame Plate Liner Insert , Cover Plate , Frame Plate, Pump Liner Expeller , Expeller Ring ,Stuffing Box , Expeller , Pump Shaft , shaft sleeve, Shaft Spacer, Bearing Assembly , Base, Stuffing Box, Gland Assembly, Bearing Housing , Lantern Ring , pump discharge pipe , flange and so on.
Naipu OEM Pump Parts
We can develop and produce a range of pumps according to different media situation to meet different duty requirements.There are Rubber Material such as R08 , R12, R26, R33, R38,R55,S03,S12,S31,S21,S42,S51,S52 etc , Wear Resistant Metal Material such as A05,A07,A12, A33, A49, A51,A61 and etc ,Corrosion Resistant Stainless Steel Material such as 201,304, 316, 316L,C55 Duplex Austenitic-Ferritic,Alloy 20,Hastelloy etc, Ceramic lining parts especially suitable for strong abrasion and corrosion mediums,and they can be interchangeable with standard slurry pump parts Ceramic Coated Stainless Steel such as J04,J05,J21,J24,J25,J26,J27,J31 etc.,Resistant Polyurethane like U01,U38, fully meet customers' request.
We can undertake various OEM orders for pumps as well as spare parts customized according to drawings or samples.
| Basic Part No. | Material Code | Part Name |
| 001 | E62 | Adjusting Screw |
| 003 | G01 | Base |
| 005 | Bearing Assembly | |
| 011 | E62 | Clamp Washer |
| 013 | D20 | Cover Plate |
| 015 | E62 | Cover Plate Bolt |
| 017 | R26A | Cover Plate Liner |
| 018 | R26A | Cover Plate Liner (Half) |
| 024 | E62 | End Cover |
| 028 | G01 | Expeller |
| 029 | G01 | Expeller Ring |
| 029R | R08A | Expeller Ring (Rubber) |
| 032 | D20 | Frame Plate |
| 034 | E62 | Frame Plate Bolt |
| 036 | R26A | Frame Plate Liner |
| 039 | E63 | Frame Plate Stud |
| 041 | A05A,R26A | Frame Plate Liner Insert |
| 043 | R26A | Frame Plate Liner (Half) |
| 044 | K24 | Gland Assembly |
| 060 | R08A | Intake Joint |
| 062 | D70 | Labyrinth |
| 063 | K31 | Lantern Ring |
| 064 | S18 | Impeller O-Ring |
| 067 | E62 | Neck Ring |
| 070 | E05 | Shaft Key |
| 073 | E05 | Shaft |
| 075 | D20 | Shaft Sleeve |
| 076 | D20 | Shaft Sleeve (Long) |
| 078 | G01 | Stuffing Box |
| 081 | E02 | Keeper Plate |
| 083 | A05A,R26A | Throat Bush |
| 085 | E02 | Cotter |
| 090 | S10 | Lip Seal |
| 109 | S18 | Shaft O-Ring |
| 110 | A05A | Volute Liner |
| 111 | Q05 | Packing |
| 117 | E62 | Shaft Spacer |
| 118 | K31 | Lantern Restrictor |
| 118-1 | K24 | Lantern Restrictor(Low Flow) |
| 122 | R11A | Expeller Ring/Stuffing Box Seal |
| 124 | R08A | Volute Liner Seal |
| 125 | R08A | Volute Frame Seal |
| 132 | R08A | Discharge Joint Ring |
| 138 | E62 | Grease Cup Adaptor |
| 179 | C23 | Shaft Sleeve Spacer |
| 210 | S46 | Shaft O-Ring |
| 217 | S18 | Impeller O-Ring |
| 239 | C23 | Impeller Release Collar |
| 241 | K24 | Lip Seal Gland |
| 302 | E02 | Lifting Tube |
| 303 | E02 | Locating Nut |
| 304 | E02 | Volute Lifting Beam |
| 306 | E02 | Shaft Wrench |
| 310 | E02 | Stuffing Box / Expeller Ring |
| 425 | R08A | Dyna Seal |
| 430 | U14 | Nut Covers |
| 005 | Bearing Assembly | |
| 019 | E02 | Mounting Plate |
| 041 | A05A | Back Liner |
| 064 | S18 | Impeller O-Ring |
| 070 | E05 | Shaft Key |
| 092 | A05A | Casing |
| 102 | E02 | Column |
| 116-1 | R10A | Strainer - Upper (Rubber) |
| 116-2 | G01 | Strainer-Upper (Cast Iron) |
| 116-3 | U02A | Strainer-Upper(Urethane) |
| 116-4 | C23 | Strainer-Upper(SS Mesh) |
| 116L | U01A | Strainer-Lower |
| 125 | R08A | Back Liner Seal |
| 154 | E02 | Discharge Pipe |
| 204 | R00 | Discharge Pipe Gasket |
| 231 | E02 | Suction Pipe |
| 290 | E02 | Spacer |
| 293 | E02 | Discharge Pipe Support |
| 306 | E02 | Shaft Wrench |
| 430 | U04A | Nut Covers |
| 005 | Bearing Assembly | |
| 019 | Mounting Plate | |
| 041 | Back Liner | |
| 064 | Impeller O Ring | |
| 070 | Shaft Key | |
| 092 | Casing | |
| 102 | Column | |
| 116 | Strainer-Upper | |
| 116L | Strainer-Lower | |
| 153 | Column Clamp | |
| 154 | Discharge Pipe | |
| 290 | Spacer | |
| 291 | Socket Head Protectors | |
| 293 | Discharge Pipe Support | |
| 306 | Shaft Wrench | |
| 421 | U-Bolt |
Possible Faults and Settlements
| Faults | Reason | Settlement |
| 1.Pump fails to discharge any water,The hand of pressure gauge beat violently | 1.Suction pipe don't have enough water. 2.Suction pipe blocked or the valve is locked. | 1. Inject enough water 2.unlock the inlet valve,clear the blocks 3.Exclude the air leakage |
| 2.The pump can't discharge water,the hand of vacuum meter beat heavily. | 1.The inlet valve is unlocked or silted up. 2.The resistance of suction pipe is too big or silted up. 3.The height of suction is too high. | 1.Unlock the valve or desilting 2.improve the design of suction pipe or desilt 3.Lower the height of the installation. |
| 3.The pump can't discharge water,pressure gauge shows heavy pressure. | 1.The resistance of the discharge pipe is too big. 2.The impeller blocked 3.The speed is slow. | 1.Check and adjust the outlet pipe. 2.Clear the impeller 3. Improve the speed. |
| 4.The pump doesn't rotate | The volute is silted up by the blocks. | Clear the blocks |
| 5.The capacity is not enough | 1.The blocks of the impeller or the inlet or outlet pipe. 2.The abrasion of the impeller is heavily. 3.The speed is low to normal 4.Pump is installed unreasonably or the leakage of the inlet pipe. 5.The transporting height is too high,the loss of the resistance of the inside pipe are too big. 6.The inlet valve not open enough or blocked 7.The packing seal leaks | 1.Clear the impeller or pipe. 2.Change the impeller 3.Adjust the speed 4.Install again or stop leaking.
|
| 6.The motor of the pump is overloaded | 1.The head of the pump exceeds the head of the working condition. 2.Not consider the slurry density when selecting the pump. 3.The packing press tightly | 1.Turn down the outlet valve,cut the impeller or lower the speed. 2.Select the motor again. 3.Adjust the the screw of the packing gland |
| 7.Abnormal sound in the pump, and no water out | 1.The resistance of the inlet pipe is too big. 2.The height of the suction is too high. 3.Cavitation occurred 4 .there is air in the inlet 5.The temperature of the liquid is too high |
|
| 8.pump vibrates | 1.pump cavitate 2.The block of the impeller single vane 3.The no concentricity between the pump shaft and motor shaft 4.Fasteners or foundation loose | 1.Adjust the water valve ,lower the height of the installation,reduce the resistance of the inlet. 2.Clear the impeller 3.Alignment again 4.Fasten the screw,and reinforce the foundation. |
| 9.Bearing is overheat | 1.lock the cooling water 2.lubrication is not good. 3.the lubrication oil is not clear 4.the wrong direction of the thrust bearing. 5.there is something wrong with the bearing. |
|
| 10.Packing short life | The material of packing is not good | Change the packing |
| 11.pump leak oil | 1.High oil level 2.The rubber parts invalid 3.Assembly problem | 1.Lower the oil level 2.Change rubber spares 3.Adjust the assembly |
| 12 Pump head leaking | 1.The rubber parts not press well | Assembly again or press tightly |
Contact US
Contact Person: Karen Tan
