Audited Supplier
SHARE cell strainer caps for stem cell and tissue derived primary cell preparation are ideal for obtaining uniform single cell suspension from various sources. Cell strainers are made from nylon with many different pore size meshes, generally 20um 35um 40um 70um 100um, showing optimal performances in a variety of applications such as stem cell and primary cell preparation.
SHARE offers molded plastic cell strainer snap cap for a wide range of laboratory applications where the filtration and the purification of liquids is required. Its unique design features improved ventilation to avoid clogging for a smart sample preparation. Our cell strainer are stackable to allow direct filtration with different mesh sizes and alsocan be inverted to recover the sieved material. For large sample volumes it can be combined with a funnel.
Many different pore sizes are available: 20um 35um 40um 70um 100um, color coded by mesh pore size.
It fits for 15 ml conical centrifuge tubes, blood collecting tube, flow cytometry tube, 3 ml tube, 2 ml cryo tube, 5 ml conical tube screw cap, 5 ml reaction tube snap cap, 2 ml reaction tube, 1.5 reaction tube, 48 well plate, 24 well plate.
| Product Name | 35um Nylon Mesh Strainer Cap for Flow Cytometry Tubes |
| Manufacturer | Taizhou Share Filters Co. Ltd. |
| Brand | SHARE FILTERS |
| Material | Polypropylene frame with nylon mesh filter |
| Pore Size | Generally 20um 35um 40um 70um 100um |
| Color | White, yellow, blue, red or customized, color coded by mesh pore size |
| Size | 1cm or customised |
| Fit for | Most brands of test tubes: 15 ml conical centrifuge tubes, blood collecting tube, flow cytometry tube, 3 ml tube, 2 ml cryo tube, 5 ml conical tube screw cap, 5 ml reaction tube snap cap, 2 ml reaction tube, 1.5 reaction tube, 48 well plate, 24 well plate |
| Usage | Cell culture in laboratory, flow cytometer cell sample, impurity filtration, cell dispersion, sampling, etc |
| Package | Individual single packaged, 100pcs/carton |
Each batch of SHARE's filter meshes undergoes a meticulous process involving at least twelve distinct steps, ensuring the ultimate production of high-quality filtering products.
Yarn→Raw yarn inspection→Warping arranging→Drawing in heddle→Drawing in reed→Weaving→Initial survey→Washing→Heat setting treatment→Physical properties inspection→Products inspection→Product→(Prefabrated filter and screens if needed)→(Molded plastic filters if needed)
The below table will provide information on the mesh opening, open area percentage, mesh count, and thread diameter on all of our various pore sizes of nylon mesh offered.
| Precision Nylon Filter Mesh Technical Data | |||||||
| Fabric Number | Mesh count | Thread Diameter | Mesh Opening | Open Area | Fabric Thickness | Weight | |
| No. | cm mesh/inch | micron | micron | % | micron | g/m2 | |
| JPP5 | 5 | 12 | 500 | 1500 | 56 | 850 | 271 |
| JPP6 | 6 | 16 | 400 | 1267 | 58 | 780 | 208 |
| JPP7 | 7 | 18 | 350 | 1079 | 57 | 675 | 186 |
| JPP8 | 8 | 20 | 350 | 900 | 52 | 685 | 212 |
| JPP9 | 9 | 24 | 250 | 860 | 60 | 455 | 145 |
| JPP10 | 10 | 25 | 300 | 700 | 49 | 576 | 195 |
| JPP12 | 12 | 30 | 250 | 583 | 49 | 470 | 162 |
| JPP12 | 12 | 35 | 300 | 533 | 41 | 585 | 234 |
| JPP14 | 14 | 40 | 300 | 414 | 34 | 595 | 273 |
| JPP16 | 16 | 40 | 200 | 425 | 46 | 370 | 139 |
| JPP16 | 16 | 50 | 250 | 375 | 36 | 485 | 217 |
| JPP20 | 20 | 50 | 150 | 350 | 49 | 375 | 98 |
| JPP20 | 20 | 50 | 200 | 300 | 36 | 385 | 173 |
| JPP24 | 24 | 60 | 150 | 267 | 41 | 285 | 117 |
| JPP28 | 28 | 70 | 120 | 237 | 44 | 215 | 87 |
| JPP30 | 30 | 76 | 120 | 213 | 41 | 225 | 94 |
| JPP32 | 32 | 80 | 100 | 213 | 46 | 165 | 69 |
| JPP36 | 36 | 90 | 100 | 178 | 41 | 178 | 78 |
| JPP40 | 40 | 100 | 100 | 150 | 36 | 190 | 87 |
| JPP43 | 43 | 110 | 80 | 152 | 43 | 135 | 60 |
| JPP48 | 48 | 120 | 80 | 130 | 38 | 145 | 62 |
| JPP56 | 56 | 140 | 60 | 120 | 44 | 85 | 44 |
| JPP59 | 59 | 150 | 60 | 110 | 42 | 98 | 46 |
| JPP64 | 64 | 160 | 60 | 100 | 37 | 105 | 50 |
| JPP72 | 72 | 180 | 50 | 90 | 41 | 82 | 39 |
| JPP80 | 80 | 200 | 50 | 75 | 36 | 90 | 43 |
| JPP100 | 100 | 250 | 40 | 60 | 36 | 65 | 35 |
| JPP120 | 120 | 305 | 40 | 43 | 25 | 70 | 29 |
| JPP130 | 130 | 330 | 40 | 37 | 23 | 75 | 31 |
| JPP140 | 140 | 355 | 30 | 38 | 33.7 | 60 | 33 |
| JPP150 | 150 | 381 | 30 | 34 | 30.25 | 52 | 26 |
| JPP165 | 165 | 420 | 30 | 28 | 20.7 | 51 | 29 |
| JPP180 | 180 | 460 | 30 | 25 | 19.5 | 58 | 31 |
| JPP200 | 200 | 510 | 30 | 16 | 10.2 | 58 | 35 |
The data are compiled to the best of our knowledge. Subject to change without notice. Current data available on you demand.
Mesh Count: Number of openings per inch or centimeter
Weave Type: Plain Weave (PW) or Twill Weave (TW)
Thread Diameter: The diameter of each thread before weaving
Mesh Thickness: The average thickness of the woven mesh
Mesh Opening: The distance between adjacent threads
Mesh Opening =25400÷Mesh Count(per inch)−Wire Diameter
Mesh Opening =10000÷Mesh Count(per cm)−Wire Diameter
Open Area: The ratio (%) of the open area to the thread area within a woven mesh
Open Area %=(Opening Size)2÷(Opening Size+Wire Diameter)2×100
Material property is an important know-how to injection molding. It is highly related with molding quality, finish and cost. Our team devote this knowledge and experience to the molding products of our customers. From various thermoplastic (PA, PP, PC, POM, PET, ABS and Peek) to thermosetting (PE, Epoxy and Silicon) even combined plastic materials (such as glass fiber), we put material property as a must-evaluation when design tooling, so we would also help to suggest equivalent materials for quality improvement or cost reduction.
| Artificial or Synthetic Fiber Chemical Resistance Comparison | ||||||||
| Fiber Type | Continuous Working Temp. | Max. Working Temp. | Filtration Characteristic | Abrasion Resistance | Hydrolysis Resistance | Acid Resistance | Alkalis Resistance | Oxidation Resistance |
| PVC | 75ºC | 80ºC | Good | Excellent | Excellent | Excellent | Excellent | Good |
| PP | 90ºC | 100ºC | Good | Good | Excellent | Excellent | Excellent | Poor |
| PA | 110ºC | 115ºC | Moderate | Excellent | Poort | Moderate | Good | Moderate |
| PAN Copolymer | 120ºC` | 130ºC | Good | Good | Good | Moderate | Moderate | Good |
| PET | 135ºC | 150ºC | Excellent | Excellent | Poor | Moderate | Poor | Good |
| m-Aramide | 180ºC | 220ºC | Excellent | Excellent | Moderate | Moderate | Moderate | Good |
| PPS | 190ºC | 200ºC | Excellent | Good | Excellent | Excellent | Excellent | Moderate |
| Polyimide | 240ºC | 280ºC | Excellent | Moderate | Good | Good | Moderate | Excellent |
| Polyertrafluoroethylene | 250ºC | 280ºC | Moderate | Good | Excellent | Excellent | Excellent | Excellent |
| Fiberglass | 250ºC | 280ºC | Moderate | Moderate | Excellent | Poort | Moderate | Excellent |
SHARE has the ability to engineer woven mesh fabrics into finished or partly finished products by insert molding or over molding. With its industrial lines and long-standing experience, we provide fabrics cut to size, lot-to-lot consistency and high quality custom fabricated components, in almost any requested shapes.
1. Who are we?
Taizhou Share Filters Co., Ltd is a China-based factory established in 1983.
We specialize in filter media with rating from 3um to 2500um (woven filters), converting meshes filters into various sizes and shapes, and molding mesh with plastic to create different types of plastic filters.
2. How long does a quotation take?
In most cases, we respond within one working day. If something in RFQ need be confirmed, we will promptly notify you soon.
3. How quickly can I get my order finished?
The production lead time is dependent on the quantity. Typically, it takes 5 to 15 working days for us to complete mass production once you have placed the order.
4. What about your quality control?
Our production operators conduct self-inspections at every stage of the process. Additionally, we have spot inspections and final inspections carried out by our Quality Control (QC) team.
5. What kind of payment terms do you accept?
T/T and LC and more.
6. What's your largest advantage?
One of our core competencies is the production of high precision injection molded plastic filters with professional technical team and quality guarantee and management for more than 30 years.
7. Can plastic molded filter specifications be customized?
Absolutely, at SHARE, the materials, dimensions, shape, construction method, mesh size, and applications of the filters are all fully customizable to meet your specific requirements.
8. Do you need drawings for production?
If you have drawing (2D, 3D both available. 2D like PDF, CAD, JPG etc. 3D like STP, IGS, STL, SAT, PRT, IPT etc.) it'll be helpful for us to proceed with the production.
However, if you don't have any drawing, don't worry. SHARE can work with you to create a drawing based on a description or image of the filters you have in mind. We can get started without any drawings initially.
9. How do I know my design will be kept confidential?
At SHARE, we take confidentiality seriously. We are willing to sign and adhere to any non-disclosure or confidentiality agreement with our customers. Moreover, we have strict confidentiality policies within our factory, ensuring that no proprietary information is ever disclosed to any third party.
10. What are the common weaving types for plastic molded filters?
The most common weaving type is plain weave mesh, but we also utilize other options like twill weave mesh. Plain weave mesh is popular and affordable.
11. What situations can be anticipated in which plastic molded filters should be selected?
Plastic molding is better for mounting in the case of sandwiching. This is because it can be made without gaps in the shape of the mounting partner.
Plastic molding is preferable for mounting purposes, especially when sandwiching is required. This method allows us to create filters without any gaps to perfectly fit the mounting partner's shape.
