Audited Supplier
JH-4200
Adjust
Combination
RoHS, CCC, ISO: 9001, CE
New
Non-Customized
500mA/12VDC,6W
-40~80ºC
5~95% Rh
-50~100ºC
900g
Rail Mounted or Wall Mounted
PARAGON
Box
Aluminum alloy, vertical shape
China
Product Description
Introduction
The JH-4200 series rail type second/third layer network management industrial Ethernet switch supports up to 7 100Mbps optical/electrical ports or 8 Gigabit optical/electrical ports, and can support 2 RS232/422/485 serial communication interfaces, 1 CAN2.0A/B interface, and 1 DO. It is designed specifically for industrial application sites that require network management functions, signal acquisition, and equipment control.
The JH-4200 series supports its own redundant ring network protocol M-Ring, with a super fast self-healing time of less than 20ms, making it easy for users to establish highly reliable ring redundant industrial networks. Equipment support includes static routing, RIP, OSFP dynamic routing protocols; Support multiple management methods including Web, Telnet, Console, and SNMP; Support control functions such as VLAN/GVRP, QoS, IGMP Snooping/Query, LACP, and bandwidth management; And it supports mechanisms such as IP/MAC and port binding, DHCP services, IP access lists, IEEE 802.1X port access control, as well as port mirroring, real-time traffic statistics, MAC address tables, email alarms, system logs, and other diagnostic methods. The various advanced network standards supported by the device facilitate users to optimize network performance, enhance network security, and simplify maintenance procedures. The serial communication interface and CAN bus interface support Modbus communication protocol and CANopen protocol, facilitating on-site signal access and device control.
The JH-4200 series products are made of high-strength industrial aluminum alloy material, with an IP40 protection level, and support DIN rail or wall mounted installation. The device supports dual redundant AC/DC wide voltage input, with built-in power port surge protection and Ethernet port ESD protection. Power or port failures can be alarmed through relay output, and supports industrial wide temperature applications ranging from -40 to 80 ºC, which can well meet the requirements of strict industrial site environments.
Feature
» Supports up to 7 Gigabit ports or 8 Gigabit ports
» 2 user serial ports, RS232//422/485 mode optional
» 1 CAN2.0A/B interface and 1 DO
» Supporting Gigabit Ring Redundancy M-Ring, STP/RSTP/MSTP
» The self-healing time of the ring network is less than 20ms@200 Switch
» Support static routing, RIP, OSFP dynamic routing protocols
» Support VLAN, QoS, IGMP, LACP control
» Support for Web/Telnet/Console/SNMP management
» Support multiple security mechanisms and diagnostic methods
» Support Modbus communication protocol and CANOpen protocol
» Support AC/DC dual redundant power supply wide voltage input
» Support power port surge protection
» Support for Ethernet port ESD protection
» Support DIN rail installation or wall mounted installation
» Support industrial wide temperature applications ranging from -40 to 80 ºC
The JH-4200 series rail type second/third layer network management industrial Ethernet switch supports up to 7 100Mbps optical/electrical ports or 8 Gigabit optical/electrical ports, and can support 2 RS232/422/485 serial communication interfaces, 1 CAN2.0A/B interface, and 1 DO. It is designed specifically for industrial application sites that require network management functions, signal acquisition, and equipment control.
The JH-4200 series supports its own redundant ring network protocol M-Ring, with a super fast self-healing time of less than 20ms, making it easy for users to establish highly reliable ring redundant industrial networks. Equipment support includes static routing, RIP, OSFP dynamic routing protocols; Support multiple management methods including Web, Telnet, Console, and SNMP; Support control functions such as VLAN/GVRP, QoS, IGMP Snooping/Query, LACP, and bandwidth management; And it supports mechanisms such as IP/MAC and port binding, DHCP services, IP access lists, IEEE 802.1X port access control, as well as port mirroring, real-time traffic statistics, MAC address tables, email alarms, system logs, and other diagnostic methods. The various advanced network standards supported by the device facilitate users to optimize network performance, enhance network security, and simplify maintenance procedures. The serial communication interface and CAN bus interface support Modbus communication protocol and CANopen protocol, facilitating on-site signal access and device control.
The JH-4200 series products are made of high-strength industrial aluminum alloy material, with an IP40 protection level, and support DIN rail or wall mounted installation. The device supports dual redundant AC/DC wide voltage input, with built-in power port surge protection and Ethernet port ESD protection. Power or port failures can be alarmed through relay output, and supports industrial wide temperature applications ranging from -40 to 80 ºC, which can well meet the requirements of strict industrial site environments.
Feature
» Supports up to 7 Gigabit ports or 8 Gigabit ports
» 2 user serial ports, RS232//422/485 mode optional
» 1 CAN2.0A/B interface and 1 DO
» Supporting Gigabit Ring Redundancy M-Ring, STP/RSTP/MSTP
» The self-healing time of the ring network is less than 20ms@200 Switch
» Support static routing, RIP, OSFP dynamic routing protocols
» Support VLAN, QoS, IGMP, LACP control
» Support for Web/Telnet/Console/SNMP management
» Support multiple security mechanisms and diagnostic methods
» Support Modbus communication protocol and CANOpen protocol
» Support AC/DC dual redundant power supply wide voltage input
» Support power port surge protection
» Support for Ethernet port ESD protection
» Support DIN rail installation or wall mounted installation
» Support industrial wide temperature applications ranging from -40 to 80 ºC
| Technical Parameter | ||
| Standard | IEEE 802.3 10BaseT | |
| IEEE 802.3u for 100BaseTX/FX | ||
| IEEE 802.3x is suitable for flow control | ||
| IEEE 802.1D-2004 for STP | ||
| IEEE 802.1w for RSTP | ||
| IEEE 802.1p is applicable to Class of Service | ||
| IEEE 802.1Q is suitable for VLAN tagging | ||
| IEEE 802.3ab 1000BaseTX | ||
| IEEE 802.3z for 1000BaseX | ||
| IEEE 802.3az is applicable to Energy Efficient Ethernet | ||
| Processing type | Storage and forwarding exchange method | |
| Transmission distance | 100m (based on twisted pair Ethernet) | |
| 110km (based on SFP) | ||
| Transmission rate | 10/100Mbps adaptive (100Mbps optical/electrical port) | |
| 1000Mbps (Gigabit optical/electrical) | ||
| Switch Properties | ||
| MAC Table | 8KB | |
| Package buffer | 1024Kbit | |
| Interface | ||
| RJ45 port | 10/100BaseTX automatic detection | |
| MDI/MDI-X adaptive | ||
| Fiber optic port | 100Base FX (SC/ST interface) | |
| 1000Base SFP slot | ||
| Control port | RS-232 (RJ45 connector) | |
| Power demand | ||
| Low voltage input | 9-60VDC, recommended to use 24VDC | |
| High voltage input | 85~265VAC or 100~370VDC | |
| System power consumption | 500mA @24VDC,12W | |
| Port protection | Support overload protection | |
| Support reverse connection protection | ||
| LED Indicator Light | ||
| System | PWR1,PWR2 ,Fault | |
| Network | ACT/LINK (located on RJ45 connector) | |
| Serial interface | ||
| Number of channels | 2 | |
| Standard | RS232 (TxD ,RxD ,GND) | |
| RS485 (Data+ ,Data-,GND) | ||
| RS422 (Tx+,Tx-,Rx+,Rx-,GND) | ||
| Baud rate | 600bps~230.4Kbps | |
| Communication protocol | Modbus RTU | |
| Serial isolation | 4000Vrms photoelectric isolation | |
| Serial port protection | All signal lines are provided with 15KV ESD | |
| Flow control | RS485 automatic data flow control | |
| CAN interface | ||
| Number of channels | 1 | |
| Standard | Bidirectional optical isolation CAN2.0A/B interface | |
| Communication protocol | CANOpen | |
| Signal | CAN- H ,CAN - L | |
| Speed | Maximum 1Mbps Maximum 1Mbps | |
| Isolation protection | 2KV digital optoelectronic isolation at 300MHz | |
| Digital output | ||
| Number of channels | 1 | |
| Relay | Optocoupler relay, contactless, capacity 1A@60VAC Or 1A @ 60VDC | |
| Mechanical Characteristics | ||
| Shell | Aluminum alloy, vertical shape | |
| Weight | 900g | |
| Size | 80×105×135 mm | |
| Installation method | Rail mounted or wall mounted | |
| Work Environment | ||
| Working temperature | -40~80ºC | |
| Working humidity | 5~95% RH | |
| Storage temperature | -50~100ºC | |
| Seismic performance | 1G@IEC-68-2-6,sine wave,5~500Hz,1Oct./min,1hr/axis | |
| Impact resistance | 5G@IEC-68-2-27 Half sine wave, 30ms | |
| Reliability | ||
| MTBF | Over 500000 hours | |
| Warranty period | 1 year | |
| Network management | ||
| Configuration method | Web browser method | |
| Telnet remote login | ||
| Console controller console | ||
| SNMP management | ||
| VLAN | IEEE802.1Q, GVRP, Port based VLAN | |
| Ring network redundancy | Support for self owned redundant ring network protocol M - Ring | |
| Supports STP/RSTP/MSTP | ||
| Ultra high speed self-healing time less than 20ms | ||
| Routing Protocol | Supports static routing protocols | |
| Support RIP v1/v2 dynamic routing protocol | ||
| Support OSPF v2 dynamic routing protocol | ||
| Network security | IP secure access, port security | |
| DHCP service, port IP binding | ||
| IEEE802.1X Port Access Control | ||
| Flow control | IGMP Snooping/Query Group Level Management | |
| Speed limitation and broadcast storm suppression | ||
| IEEE 802.1 p QoS priority queue | ||
| IEEE 802.3 x Backpressure Flow Control | ||
| Diagnosis | Port mirroring, real-time traffic statistics | |
| MAC address table, SNTP | ||
| Email alarms and system logs | ||
| Optional models | |
| JH-4200 | 100Mbps/Gigabit rail type second/third layer network management industrial Ethernet switch, supporting up to 7 100Mbps ports or 8 Gigabit ports, and supporting 2 serial ports, 1 CAN, and 1 DO |
| Port type | |
| -4BD3QD-2C1N1O | 4 100Mbps electrical ports, 3 Gigabit electrical ports, 2 serial ports, 1 CAN and 1 DO |
| -4BD3QG-2C1N1O | 4 100Mbps electrical ports, 3 Gigabit optical ports, 2 serial ports, 1 CAN and 1 DO |
| -5BD2BG3QG-2C1N1O | 5 100Mbps electrical ports, 2 100Mbps optical ports, 3 Gigabit optical ports, 2 serial ports, 1 CAN and 1 DO |
| -6QD2QG-2C1N1O | 6 Gigabit electrical ports, 2 Gigabit optical ports, 2 serial ports, 1 CAN and 1 DO |
| Power input | |
| -L5 | 9-60VDC |
| -HV | 85~265VAC or 100~370VDC |
| Purchasing accessories | |
| Gigabit SFP modules | Refer to SFP module selection table |
1.Q: Who are we?
A: We are a high-tech enterprise dedicated to the research and development, production, and sales of industrial automation signal acquisition, processing, and communication products. Headquartered in Nanjing, China, our company offers comprehensive pre-sales, after-sales, and technical services globally. Our primary products include remote I/O modules, safety barriers, isolators, safety relays, surge protectors, power transmitters, industrial switches, serial servers among others.
2.Q: Why should you choose us over other suppliers?
A: Our company is committed to ensuring equipment interface safety at industrial sites. Our products are utilized worldwide across various sectors including electric power generation; petroleum and petrochemical industries; steel manufacturing; cement production; environmental protection; metallurgy; mining operations; aerospace applications; textiles manufacturing; pharmaceuticals distribution; transportation logistics; shipbuilding activities as well as plastics and rubber production processes.
3.Q: How do you ensure quality?
A: Paragon Technology consistently adheres to the business philosophy of "conducting world-class standards." We strive to provide our customers with high-quality products alongside exceptional service and comprehensive technical support.
4.Q: Do you accept OEM or ODM orders?
A: Yes. Please share your specific requirements with us.
5.Q: What is your minimum order quantity (MOQ)?
A: The minimum order quantity is one unit.
6.Q: What is the warranty period for your product?
A: The warranty period is one year (covering non-human-induced damages).
