Audited Supplier
Features
1. Three station, injection molding, blowing molding and mold unloading in one set. High requirement to mold, long life, save raw. Finished bottle is molded at one time, using hot runner system and high pressure injection making high precision in bottle neck and screw, 100 percent seaming with cap with little change of bottle weight, uniform wall thick, none kerf and flash, none weld line at bottom.
2. Three stations arranged at 120 degrees, reduction of the cycle time, rise in production efficiency, full-automatic with no secondary pollution.
3. Adopted hydraulic and pneumatic components of well known brands, advanced PC or computer control system leads to stable performance and easy operation.
FD30S double servo injection blow molding machine 1.The clamping framework adopts single-crossbeam,double pillars,which enlarges the space of setting mould,will be easier to install mould. 2.Injection clamping adopts the structure of three oil vats and small supply-oil case,hence the speed of open/clamping will be quicker and the bearing pressure of mould will be more equally. 3.using tie-bar protection makes open/clamping mould work while transfer table rise/fall,so the production efficiency improve obviously,and protect core rods damages once mold hasn't at right station. 4.double servo motor system control for 30% consumption saving (Optional). 5.Special thickness working platform with QT material assure machine run stably,clamping well,anti-distortion. »Operating Principle Station A:Preform injection The bottle neck will be molded accurately after injecting the material into the cavity,After proper control,the mold open and mandrils to...along with the cavity. Station B:Blow molding Blowing action was done at this part,molding would be complete after cooling.(bottle shape decides by the mold cavity).The air came out from the mandrils huffs the cavity,make the cavity cling to the mold.Then mold open and the mandrils turn to...along with bottles. Station C:Stripper The bottle automatically will be ejected from the mandrils at this position and then to be packed.The three actions of injection/blowing/ejection working at the same time,which makes the machine of high efficiency and low waste with bottles. »Main Technical Parameters
»Machine Main Parts Brand
»Packaging & Shipping   | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
