Audited Supplier
SQH-S
Guarantee
Guarantee
Bucket Elevator
All, Beans, Wheat
380V
Axle
New
Customized
Normal Atmospheric Temperature
Atmospheric Pressure
QH
Wrapping Film
Stainless steel/carbon steel
Changzhou, Jiangsu
8401200000
Product Description
Product introduction
Pneumatic conveying of powder is applicable to the conveying, unpacking and feeding of ultra-fine, light, dry and easy flowing powder (the bulk density is ≤ 800kg/m3; it is recommended that users measure the actual measurement to determine the conveying capacity of this pump; it can be portable, simple, installation free, reliable and low failure rate; instead of manual feeding, it is more cost-effective than the traditional large and complex powder conveying system.
Technical parameter
Product photos
Product features
1. Compared with manual mode, it is a simple, efficient and clean powder conveying mode
2. Closed transportation, ensuring personal safety, reducing air pollution and raw material waste
3. Fluidized gas and driving gas can be separated, and inert gas can be used to fluidize powder independently to avoid oxidation and deliquescence of materials in contact with air
4. Low energy consumption, low wear, extremely low gas consumption, and less tail gas treatment capacity. No complicated filtering and dedusting equipment is required, which can greatly simplify the tail gas treatment equipment
5. Leading technology, safe and reliable. The non-equilibrium gas valve started by low air pressure, the stall free gas valve integrated with patented technology, and the new air distribution induced fluidization system effectively prevent the sudden spraying of powder at the moment of starting, with high conveying efficiency. The fluidizing air circuit and the driving air circuit can be supplied independently, with the interlock protection function of 2-way air supply pressure to prevent damage to the powder pump due to inconsistent air supply pressure. At the same time, it is equipped with a restart button with a delayed start function to prevent accidental shutdown and restart from damaging the diaphragm
6. Small size, light weight, ready to use, mobile use, installation and debugging free
Product application
It is applied to the transportation of light dry powder (conventional bulk density 0.08-0.6kg/L) and fine powder with good fluidity. It is suitable for small batches of adding various powders to reaction kettles, mixing tanks and mixing tanks, as well as for occasions requiring constant speed and quantitative addition of powders under various working conditions. See the following for typical powder materials:
1. White carbon black of various processes, expanded mica, diatomite and other non mineral industry powders;
2. Graphite powder, various pigments, plasticizers and flame retardants in plastic industry;
3. Acrylic resin, silicone resin, plastic powder and other organic powders;
4. Fine chemicals such as sodium methoxide and salt, pharmaceutical raw materials and intermediates;
5. Activated carbon powder, carbon black, calcined silica;
6. Other light powder conveying
Company profile
QIANGHAN MACHINERY (CHANGZHOU) CO.,LTD is committed to the design and manufacture of powder unpacking and unloading, conveying and loading, powder valve equipment and related supporting equipment and products are widely used in chemical, food, medicine, feed, cosmetics and other industries.
Strong drought has professional technical personnel and a quality work team, which can timely provide customers with perfect after-sales service. Survive with quality, develop with service, always adhere to the principle of contract and trustworthiness. Our products excellent in quality and affordable in price. Welcome new and old customers to the factory!
FAQ
Q:What is the delivery time ?
A:Our delivery time is within 3-7days after we get your payment; For large qty mass order, the time should be confrimed by quantity.
Q: How about the Warranty time ?
A:Our warranty time is 12 months after you get our goods. All products are provided with lifelong technical services and support.
Q:How about the payment terms ?
A:You can choose T/T, Western union or Paypal.
Q: Do you provide samples ?
A: Yes, we have materials in stock to help you to get the samples as soon as we can.
Q:Can I have my own logo of the products?
A:Of course. We provide OEM services such as product's material, dimension, color, etc.
Pneumatic conveying of powder is applicable to the conveying, unpacking and feeding of ultra-fine, light, dry and easy flowing powder (the bulk density is ≤ 800kg/m3; it is recommended that users measure the actual measurement to determine the conveying capacity of this pump; it can be portable, simple, installation free, reliable and low failure rate; instead of manual feeding, it is more cost-effective than the traditional large and complex powder conveying system.
Technical parameter
| throughput | 10kg~6000kg/h | Lifting height | 0-5m |
| Conveying height | 0-30m | Overcurrent material | Aluminum alloy, stainless steel |
| Material inlet | 1~3 (DN25~80mm) | Diaphragm material | PTFE, wear-resistant rubber |
| Material export | 1~3 (DN25~80mm) | Sphere Material | PTFE, stainless steel, wear-resistant rubber |
| Air source inlet | 4 points (1/2 "), 6 points (3/4") | Ball seat material | PTFE, stainless steel, wear-resistant rubber |
| Driving air pressure | 0.5~7kg | Maximum gas consumption | 1000~2700NL/min |
| Through particles | ≤6mm | Fastest speed | 200cpm |
Product photos
Product features
1. Compared with manual mode, it is a simple, efficient and clean powder conveying mode
2. Closed transportation, ensuring personal safety, reducing air pollution and raw material waste
3. Fluidized gas and driving gas can be separated, and inert gas can be used to fluidize powder independently to avoid oxidation and deliquescence of materials in contact with air
4. Low energy consumption, low wear, extremely low gas consumption, and less tail gas treatment capacity. No complicated filtering and dedusting equipment is required, which can greatly simplify the tail gas treatment equipment
5. Leading technology, safe and reliable. The non-equilibrium gas valve started by low air pressure, the stall free gas valve integrated with patented technology, and the new air distribution induced fluidization system effectively prevent the sudden spraying of powder at the moment of starting, with high conveying efficiency. The fluidizing air circuit and the driving air circuit can be supplied independently, with the interlock protection function of 2-way air supply pressure to prevent damage to the powder pump due to inconsistent air supply pressure. At the same time, it is equipped with a restart button with a delayed start function to prevent accidental shutdown and restart from damaging the diaphragm
6. Small size, light weight, ready to use, mobile use, installation and debugging free
Product application
It is applied to the transportation of light dry powder (conventional bulk density 0.08-0.6kg/L) and fine powder with good fluidity. It is suitable for small batches of adding various powders to reaction kettles, mixing tanks and mixing tanks, as well as for occasions requiring constant speed and quantitative addition of powders under various working conditions. See the following for typical powder materials:
1. White carbon black of various processes, expanded mica, diatomite and other non mineral industry powders;
2. Graphite powder, various pigments, plasticizers and flame retardants in plastic industry;
3. Acrylic resin, silicone resin, plastic powder and other organic powders;
4. Fine chemicals such as sodium methoxide and salt, pharmaceutical raw materials and intermediates;
5. Activated carbon powder, carbon black, calcined silica;
6. Other light powder conveying
Company profile
QIANGHAN MACHINERY (CHANGZHOU) CO.,LTD is committed to the design and manufacture of powder unpacking and unloading, conveying and loading, powder valve equipment and related supporting equipment and products are widely used in chemical, food, medicine, feed, cosmetics and other industries.
Strong drought has professional technical personnel and a quality work team, which can timely provide customers with perfect after-sales service. Survive with quality, develop with service, always adhere to the principle of contract and trustworthiness. Our products excellent in quality and affordable in price. Welcome new and old customers to the factory!
FAQ
Q:What is the delivery time ?
A:Our delivery time is within 3-7days after we get your payment; For large qty mass order, the time should be confrimed by quantity.
Q: How about the Warranty time ?
A:Our warranty time is 12 months after you get our goods. All products are provided with lifelong technical services and support.
Q:How about the payment terms ?
A:You can choose T/T, Western union or Paypal.
Q: Do you provide samples ?
A: Yes, we have materials in stock to help you to get the samples as soon as we can.
Q:Can I have my own logo of the products?
A:Of course. We provide OEM services such as product's material, dimension, color, etc.
