Audited Supplier
KR-GNJ-650L-LM
Granulating, Milling, Vacuum
Engineers Available to Service Machinery Overseas, Online Support, video Technical Support
Granules, Liquid, Liquid with Suspended Solids, Powder, Viscous Fluid
Agricultural Chemicals, Chemical, Daily Chemical, Engineering & Construction, Food, Metallurgy&Mineral, Pharmaceutical, Lithium Battery Production
CE, ISO
New
PLC Control
Water Cooling
Hot Water Heating
Cast Iron, Stainless Steel
250-500L
Emergency Stop Button, Overload Protection, Safety Lock, Splash Guard
Variable Speed
Mixing Paddle Speed: 5-44 Rpm
Spiral
Cool and Hot Water
High Speed Mixer
High Viscosity Mixer
860L
300-650L
5-44 Rpm
3-36 Rpm Vvvf
50-1480 Rpm, Vvvf
45 Kw
55 Kw
2.2 Kw
2.2 Ton
1000-100000 MPa.S
70-80 Degress
Less Than 2%
-2 -+2 Degree
More Than 3nm Per Cm2
Career
Wood Pallet
3700mm x 2020mm x 3480mm(gantry)
China
8479820090
Product Description
Product description
Equipment Capability
Structural Decomposition Diagram
Part of project case presentation
After sales service
| No. | Item | Equipment configuration |
| 1 | Equipment appearance | Stainless steel |
| 2 | Mixing paddle motor | Inverter-fed motor |
| 3 | Dispersing motor | Inverter-fed motor |
| 4 | Control system | International brand |
| 5 | Frame structure | Gantry |
| 6 | MES interface | Standard configuration |
| 7 | Spray system | Optional |
| 8 | Automatic temperature control system | Optional (customer needs to specify configuration) cold and hot water |
| Note: If there are special requirements or additional/reduced items (such as adding/reducing pipe openings), please provide additional explanations. The main switch power cord of the equipment inlet box and the hot and cold water pipes connected to the mixing tank interface can be prepared by the customer themselves. | ||
| Working principle | This equipment adopts intelligent control through a control panel or central control system, and can automatically operate according to the prepared mixing process flow; Equipped with two spiral mixing paddles and two sets of serrated dispersing discs, driven by a dual planetary structure, it can meet the efficient mixing of various powders and liquids. Through processes such as stirring and dispersion, the particle size, uniformity of particle distribution, and consistency of viscosity can be controlled; At the same time, the mixing bucket has the functions of quick replacement and vacuum sealing. By vacuuming, bubbles in the slurry can be eliminated; So as to meet the requirements of mixing and slurry forming processes. |
| Equipment composition | Vertical column structure, transmission part, sealed container, lifting system, control system, etc. |
| External size | Long 3700mm x wide 2020mm x high 3480mm (L x W x H(Vertical column type) |
| Design capacity | 860L |
| Effective usage capicity | 300-650L |
| Mixing paddle speed | 5-44 rpm, Inverted-fed motor |
| Revolving electric motor | 3-36 rpm |
| Dispersing speed | 50-1480 rpm, Inverted-fed motor |
| Revolving motor | 45KW |
| Dispersed motor power | 55 KW |
| Lift motor | 2.2KW |
| Weight | About 14 tons |
Equipment Capability
| Slurry production | Viscosity: 1,000 ~100,000 MPa.s, solid content is applicable to 30%~70%, and 85%~100% |
| Equipment failure rate | 2% |
| Equipment bearing temperature | 7ºC ~80ºC, the customer needs to provide the circulating cold and hot water |
| Temperature measurement accuracy | ± 2ºC, the customer to provide circulating cold and cold water |
| Effective load of mixing paddle | >=3Nm/cm² |
| Applicable powders | PVDF, CMC, conductive agent, lithium iron phosphate, lithium cobalt acid, ternary, graphite, etc |
| Applicable solvent | And NMP, deionized water, etc |
| Applicable additives | SBR, CNT class |
| Vacuum pressure | Static 12H vacuum leakage rate is 10% |
| Not applicable: | Acetone solvent |
| Special reputation: | The requirements for powder feeding in the container of this equipment are: -20 kpa- + 20 Kpa. The vacuum system of this equipment is only applicable for the slurry and bubble removal function |
Structural Decomposition Diagram
|  |
2. Mixing tank | |
3. Mixing paddle | |
4.Feeding end | |
5.Power Distribution Cabinet | |
6.motor |
Part of project case presentation
After sales service
- If I place an order, what is the usual delivery time? -About 45-60 days
- How do you meet my needs.You need to tell us your production capacity, mixing materials, and the remaining requirements mentioned in particular. We will provide you with a solution based on your needs. At the same time, we will establish a dedicated production technology engineering communication and discussion group to ensure worry free throughout the process.
- Can you provide on-site installation and debugging services?
Yes, our company can send engineers to your local workshop to guide installation and commissioning, provide training, and accompany production.
