Audited Supplier
DR-40
63148-65-2
Carbon Chain Polymer
White
76-85wt-%
Ink Adhesive
Low Viscosity
Tiny, Free Flowing White Powder
DR
15kgs/Bag
DR-40
China
39059900
Product Description
Polyvinyl Butyral (PVB) Resin
Appearance:
Tiny, free flowing white powderApplications:
1)Coating adhesive (increase adhesivity, anticorrosive/shop primer, baked enamel, wash primer, paint and coating, used for various base;2)Ink adhesive;
3)The whiteboard ink adhesive;
4)Textile printing and non-woven adhesive;
5) Engineering ceramic and other ceramics;
6)Organic pigment wetting agent.
Specification:
| Item | Volatile content | Non volatile content | Butyral content | Acetate content | Hydroxy content | 10% viscosity | Free acid |
| Unit | Wt-% | Wt-% | Wt-% | Wt-% | Wt-% | mpa.s | MgKOH/g |
| DR-50 | ≤2.0 | ≥98.0 | 76-85 | ≤3.0 | 12-17 | 7-9 | ≤0.5 |
| DR-40 | ≤2.0 | ≥98.0 | 76-85 | ≤3.0 | 12-17 | 9-14 | ≤0.5 |
| DR-30 | ≤2.0 | ≥98.0 | 76-85 | ≤3.0 | 12-17 | 14-20 | ≤0.5 |
| DR-20 | ≤2.0 | ≥98.0 | 76-85 | ≤3.0 | 12-17 | 20-30 | ≤0.5 |
| DR-20SP | ≤2.0 | ≥98.0 | 76-85 | ≤3.0 | 12-17 | 25-40 | ≤0.5 |
| DR-16 | ≤2.0 | ≥98.0 | 76-85 | ≤3.0 | 12-17 | 30-55 | ≤0.5 |
| DR-17 | ≤2.0 | ≥98.0 | 76-85 | ≤3.0 | 12-17 | 35-60 | ≤0.5 |
| DR-18 | ≤2.0 | ≥98.0 | 76-85 | ≤3.0 | 12-17 | 80-110 | ≤0.5 |
| DR-13 | ≤2.0 | ≥98.0 | 76-85 | ≤3.0 | 12-17 | 160-260 | ≤0.5 |
PVB resin meet the following regulations regarding food contact plastic material:
1)The REGULATION (EC) No 1935/2004 - Article 3.1;
2) Commission regulation(EU) No 10/2011 on plastic materials and articles intended to come into contact with food.
3) The United States food and drug administration's 21 CFR § 175.105 adhesive, 21 CFR § 175.300 resin and polymer coating, 21 CFR § 176.170 paper composition and paper board contact with water and high fat food.
Characteristics:
1.Low viscosity PVB resin that is suitable for flexo and gravure printing, has good adhesion to polyolefins, metal, cellulose acetate, polyester, cellophane paper, polyamide and polystyrene film;
2.Low viscosity PVB resin as the foundation of the printing ink shows a low solvent resistance, good liquidity, good waterproof, which could be independently used as the basic resin, and could be used together with alcohol soluble nitrocellulose, acetone condensation resin, alkyd resin, maleic resin and other natural polymer;
3.Suggested quantity added to: 18-30% for DR-40; 15-20% for DR-30; 10-15% for DR-20; 5-15% for DR-16/DR-17/DR-18;
4.Dissolve under normal temperature (25 ºC ), the dissolution time is 30 minutes min., this characteristic has greatly increased the ink's solubility;
5.Low viscosity PVB resin has good wettability and pigment dispersion;
6.Non-toxic, tasteless, odorless, no aromatic element, no heavy metal, no plasticizer, is the first choice of resin for environment friendly printing ink.
Solvent preparation:
1)Low viscosity PVB resin can be dissolved in a variety of organic solvent and mixed solvent, alcohol is the best solvent, esters and ketones are inferior solvent comparing with alcohol, aliphatic hydrocarbon and aromatic hydrocarbon solvents are insoluble, but they can be used as diluents together with alcohol solvent; 2)Solution: lunch agitator stirring solution in slow or medium speed, under room temperature proportionally and slowly add PVB powder, could increase the stirring speed after solution wetting;
3)Viscosity of solution, decomposition velocity depend on the type, temperature and stirring speed of the solution;
4)Low viscosity PVB resin can be processed and used by the general equipment of printing ink and paint industry.
Storage:
Under a dry and cool (25 ºC or less) condition, the product can be stored for at least 12 months if sealed in original packaging--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Anhui Derun Import & Export Trading Co., Ltd established in 2017, ISO9001: 2015 certified company.
We focus on sourcing China origin excellent quality resins and additives which are widely used for printing ink. Current products mainly divide into 3 series.
I. Monomers, Oligomers and Photoinitiator for UV ink.
II. Resins for solvent based ink.
III. Resins for water based ink.
We aim to provide solution for the purpose of improving printing ink glossiness, adhesion, leveling, fast drying, yellow resistance, weather resistance and pigment wettability.
Consistent and stable quality are the core responsibility of our company. From initial sample analysis to commercial cooperation, we conduct strict quality control policy. Our lab team are equipped with advanced analysis instruments and trained engineers in order to provide accurate data analysis and technical solutions.
Professional, quality customer service is the core competitiveness of our company. Our experienced team is good at understanding customer's demand and quickly identify the most suitable products for our customers. Our logistic team specialize in sea shipment, air shipment and railway shipment to make sure our materials deliver to customers in perfect condition. We expect to be your most trustworthy bunsiness partner, creat brighter future together.
Almost 20 years history of import and export trade process guarantee that our product quality is stable and consistent.
FAQ
Q1. How can I get sample to test ?A: 300gram free samples available. Even free of express charge .
Q2. How about delivery?
A: 10-20 days
Q3. What payment terms are available ?
A: TT, LC, DP, DA, WESTERN UNION, PAYPAL.
Q4. How confirm specification ?
A: Send inquiry mention CAS Number, application and TDS.
