Audited Supplier
AU1000
High-performance Transducer, Three Phase Transducer, General Transducer, Single-phase Transducer, High Frequency Converter Transducer, Lift Elevator Crane
Triple
Vector Control Transducer
High Carrier Frequency PWM Control
Voltage
Low Voltage Variable-Frequency Drive
AC-DC-AC Variable-Frequency Drive
Voltage Variable-Frequency Drive
Simple Type, Elevator Special, Textile Special, Constant Torque Universal Type
Mitsubishi
Variador De Frecuencia Yaskawa
Yaskawa Servo Motor 400W
CE SGS TUV 3c
Build-in
0.75kw~1000kw
Yaskawa A1000 37kw
Frequency Drives
Frequency Converter
IGBT Inverter Yaskawa
Servomotor Yaskawa
3 Phase AC Motor Speed Control Circuit
Yaskawa Cimr-Vcba0006baa
Circuit Design IGBT Driver Module Board
E1000 Yaskawa Inverter
Aluminum Electrolytic Capacitors
Mitsubishi
Wooden Case & Carton Packing
2~500kg
China
8504403090
Product Description
Ausenist AU1000 series concludes below improvement & innovation based on the ordinary V/F inverter. With its high-end design and high quality and reliability, AU1000 series inverter will bring users all new experience.
Model Information
| Model | Voltage V | Input Current A | Output current A | Adapter motor | |
| Kw | HP | ||||
| AU1000-3P7 | 380V,50/60Hz | 10.5 | 8.5 | 4 | 5 |
| AU1000-5P5 | 380V,50/60Hz | 15.5 | 13 | 5.5 | 7.5 |
| AU1000-7P5 | 380V,50/60Hz | 21 | 16 | 7.5 | 10 |
| AU1000-09 | 380V,50/60Hz | 23 | 20 | 7.5 | 10 |
| AU1000-11 | 380V,50/60Hz | 27.6 | 25 | 11 | 15 |
| AU1000-15 | 380V,50/60Hz | 37.1 | 32 | 15 | 20 |
Selection of braking resistor
| Model | AU1000-004G3 | AU1000-5R5G3 | AU1000-7R5G3 | AU1000-011G3 | AU1000-015G3 | |
| DBR | Recommended Power(W) | 750 | 1200 | 1500 | 2500 | 3000 |
| Recommended Resistance() | ≥130 | ≥90 | ≥65 | ≥43 | ≥32 | |
Timing Table: 
Wiring of AC Drive Control Circuit
Technical specifications
| Item | Specifications | ||
| Standard functions | Maximum frequency | • Vector control: 0-300 Hz• V/F control: 0-320 Hz | |
| Carrier Frequency | 0.5-16 kHz The carrier frequency is automatically adjusted based on the load features. | ||
| Input frequency Resolution | Digital setting: 0.01 Hz Analog setting: maximum frequency x 0.025% | ||
| Control mode | • Sensorless flux vector control (SFVC) • Closed-loop vector control (CLVC) • Voltage/Frequency (V/F) control | ||
| Startup torque | • G type: 0.5 Hz/150% (SFVC); 0 Hz/180% (CLVC) • P type: 0.5 Hz/100% | ||
| Speed range | 1:100 (SVC) | 1:1000 (FVC) | |
| Speed stability Accuracy | ±0.5% (SVC) | ±0.02% (FVC) | |
| Torque control Accuracy | ±5% (FVC) | ||
| Overload capacity | • G type: 60sor 150% of the rated current, 3s for 180% of the rated current • P type: 60s for 120% of the rated current, 3s for 150% of the rated current | ||
| Torque boost | • Fixed boost• Customized boost 0.1%-30.0% | ||
| V/F curve | • Straight-line V/F curve• Multi-point V/F curve • N-power V/F curve (1.2-power, 1.4-power, 1.6-power,1.8-power,square) | ||
| V/F separation | Two types: complete separation; half separation | ||
| Ramp mode | • Straight-line ramp• S-curve ramp Four groups of acceleration/deceleration time with the range of 0.0-6500.0s | ||
| DC braking | DC braking frequency: 0.00 Hz to maximum frequency Braking time: 0.0-36.0s Braking action current value: 0.0%-100.0% | ||
| JOG control | JOG frequency range: 0.00-50.00 Hz JOG acceleration/deceleration time: 0.0-6500.0s | ||
| Onboard multiple preset speeds | It implements up to 16 speeds via the simple PLC function or combination of X terminal states. | ||
| Onboard PID | It realizes process-controlled closed loop control system easily. | ||
| Auto voltage regulation (AVR) | It can keep constant output voltage automatically when the mains voltage changes. | ||
| Over voltage/ Over current stall Control | The current and voltage are limited automatically during the running process so as to avoid frequent tripping due to over voltage/over current. | ||
| Fast current limiting function | Minimizing over-current fault protect the normal operation of the inverter | ||
| Torque limit and control | It can limit the torque automatically and prevent frequent over current tripping during the running process. Torque control can be implemented in the CLVC mode. | ||
| Individualized functions | High performance | Control of asynchronous motor and synchronous motor are implemented through the high-performance current vector control technology. | |
| Power dip ride Through | The load feedback energy compensates the voltage reduction so that the AC drive can continue to run for a short time. | ||
| Rapid current limit | It helps to avoid frequent over current faults of the AC drive. | ||
| Virtual I/Os | Five groups of virtual DI/Dos can realize simple logic control. | ||
| Timing control | Time range: 0.0-6500.0 minutes | ||
| Multi-motor switchover | Four motors can be switched over via four groups of motor parameters. | ||
| Multiple communication Protocols | It supports communication via Modbus -RTU, PROFIBUSDP, CAN link and CAN open. | ||
| Motor overheat Protection | The optional I/O extension card enables AI3 to receive the motor temperature sensor input (PT100, PT1000) so as to realize motor overheat protection. | ||
| Multiple encoder Types | It supports various encoders such as differential encoder, open-collector encoder, resolver, UVW encoder, and SIN/COS encoder. | ||
| Item | Specifications | |
| RUN | Running command source | • Operation panel • Control terminals • Serial communication port You can perform switchover between these sources in various ways. |
| Frequency source | There are a total of 10 frequency sources, such as digital setting, analog voltage setting, analog current setting, pulse setting and serial communication port setting. You can perform switchover between these sources in various ways. | |
| Auxiliary frequency source | There are ten auxiliary frequency sources. It can implement fine tuning of auxiliary frequency and frequency synthesis. | |
| Input terminal | Standard: 5 digital input (X) terminals, one of which supports up to 100 kHz high-speed pulse input 2 analog input (AI) terminals, one of which only supports 0-10 V voltage input and the other supports 0-10 V voltage input or 4-20 m A current input Expanding capacity: 5 X terminals(one of which supports IGBT enable function) 1 AI terminal that supports -10-10 V voltage input and also supports PT100\PT1000 | |
Output terminal | Standard 1 high-speed pulse output terminal (open-collector) that supports 0-100 kHz square wave signal output 1 digital output (DO) terminal 1 relay output terminal 1 analog output (AO) terminal that supports 0-20 m A current output or 0-10 V voltage output Expanding capacity: 1 DO terminal 1 relay output terminal 1 AO terminal that supports 0-20 m A current output or 0-10 V voltage output | |
| Item | Specifications | Item |
| Display and operation on the operation panel | LED display | It displays the parameters. |
| LCD displaying | Optional parts, Chinese/English Prompt action content | |
| Parameters of the copy | Achieved through the LCD operation panel option parameters of rapid replication | |
| Key locking and function selection | It can lock the keys partially or completely and define the function range of some keys so as to prevent mis-function. | |
| Protection mode | Motor short-circuit detection at power-on, input/output phase loss protection, over current protection, over voltage protection, under voltage protection, overheat protection and overload protection | |
| Environment | Installation Location | Indoor, free from direct sunlight, dust, corrosive gas, combustible gas, oil smoke, vapour, drip or salt. |
| Altitude | Lower than 1000 m | |
| Ambient Temperature | -10°C to +40°C (de-rated if the ambient temperature is between 40°C and 50°C) | |
| Humidity | Less than 95%RH, without condensing | |
| Vibration | Less than 5.9 m/s2 (0.6 g) | |
| Storage Temperature | - 20ºC ~ + 60ºC | |
| IP level | IP20 | |
| Pollution degree | PD2 | |
| Power distribution System | TN , TT | |
| Power range | 0.4KW-3.7KW | 0.75KW-37KW | Above 37KW | |
| Provision of quality service | Return period | one month | one month | nonsupport |
| Exchange period | 3 month | 3 month | nonsupport | |
| Warranty period | 18 month | 18 month | 18 month | |
Single-phase 220v input, single-phase 220v output;
Single-phase 220v input, three-phase 220v output;
Three-phase 220v input, three-phase 220v output;
Single-phase 220v input, three-phase 380v output;
2. How to choose the power of the frequency inverter?
According to your motor power, you can click "Chat Now" on the right and our sales staff will provide you with solutions online.
3. Do you support urgent orders?
Of course. We have an ERP management system. Once there is an inventory warning, we will prepare materials in advance to meet the urgent needs of customers.
5. How to ensure product quality?
Our production strictly follow ISO9001 quality control system. After four times quality inspect and high temperature testing we will print "QA" pass.
6. Do you accept OEM business?
We accept OEM and ODM with your authorization.
7.Can I have a sample order?
Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
8.What about the lead time?
Sample needed 3-5 days, mass production time needed 1-2 weeks.
9:How about your payment and shipment?
Payment: We accept T/T, Western Union, Paypal etc. terms of payment.
Shipment: For sample order, we use DHL, TNT, FEDEX, EMS etc.express; for batch order, by sea or by air.
10.Do you have any MOQ limit?
1pc for sample checking available.
11.Do you offer guarantee for the products?
Yes, we offer 18 months warranty.
