Audited Supplier
Available
2 Years
Metal
Metal-Cutting CNC Machine Tools
Linear Control
Closed-Loop Control
CNC/MNC
0.01~0.02(mm)
Mid-Range CNC Machine Tools
CE, RoHS, ISO 9001
New
GOLP
Wood Case
standard
China
Product Description
1.Laser Interferometer
Correct the machine tool's directivity, spatial coherence, etc. Provide precise measurement and calibration for linear position, speed, angle, true flatness, parallelism, verticality and other factors
2.Ball-bar
Diagnosis of dynamic accuracy of machine tools includes state detection of machine tool axes and errors caused by interpolation movement of two axes. So as to ensure high precision and high stability of the machine tool.
3. 4th and 5th rotary table
4th & 5th axis can be supplied better according to customers' requirement
Correct the machine tool's directivity, spatial coherence, etc. Provide precise measurement and calibration for linear position, speed, angle, true flatness, parallelism, verticality and other factors
2.Ball-bar
Diagnosis of dynamic accuracy of machine tools includes state detection of machine tool axes and errors caused by interpolation movement of two axes. So as to ensure high precision and high stability of the machine tool.
3. 4th and 5th rotary table
4th & 5th axis can be supplied better according to customers' requirement
| EM800A | S.A.E. | METRIC |
| Travel | ||
| X Axis | 32" | 800 mm |
| Y Axis | 20" | 500 mm |
| Z Axis | 20" | 500 mm |
| Spindle Nose to Table | 6"-26" | 150-650 mm |
| Spindle Center to Column Guideway | 22" | 550 mm |
| Table | ||
| Length | 40" | 1000 mm |
| Width | 20" | 500 mm |
| T-Slot Width | 0.7" | 18 mm |
| T-Slot Center Distance | 4" | 90 mm |
| Number of Std T-Slots | 5 | 5 |
| Table Loading capacity | 882 LB | 400 Kg |
| Table to the Ground | 36" | 900 mm |
| Spindle | ||
| Max Rating | (10/15) hp | (7.5/11) Kw |
| Max Speed | 8000 rpm | 8000 rpm |
| Max Torque | 54 ft-lb | 72 Nm |
| Drive Mode | Synchronous Belt Drive | |
| Taper/Specification | ISO 7/24Taper NO.40 | |
Feed Rate | ||
| Rapids on X/Y/Z | 1890/1890/1890 IPM | 48/48/48 m/min |
| Max Cutting | 393.7 IPM | 1-10000 mm/min |
| Min Feed Rate | 0.0000394'' | 0.001 mm |
| Axis Motors | ||
| Drive Mode for X\Y\Z | Direct Inline Drive | |
| Servo Motor Speed for X\Y\Z | 3000 rpm | |
| Diameter of Ball Screw for X\Y\Z | ø1.6" | ø40 mm |
| Ball Screw Pitch for X\Y\Z | 0.6" | 16 mm |
| ATC | ||
| Tool Magazine | Vertical Disc Type with Manipulator | |
| Capacity | 24-Tools | |
| Tool Shank | BT-40 | |
| Shank Bolt | P-40T( 45°) | |
| Max Tool Diameter(full) | ø3.1" | ø80 mm |
| Max Tool Diameter (no adjacent tools) | ø5.9" | ø150 mm |
| Max Tool length | 11.8" | 300 mm |
| Max Tool Weight | 18 LBS | 8 Kg |
| Tool-to-Tool Changing Time | 2.5 secs | 2.5 secs |
| Dimension & Power Capacity | |||||
| Machine Weight | 11023 LBS | 5000 Kg | |||
| Machine Height | 101" | 2550 mm | |||
| Machine Area (Length*Width) | 99"*93" | 2500 mm*2350 mm | |||
| CP | 20 KVA | ||||
| Precision | |||||
| Positioning Accuracy | 0.000197" | 0.005 mm | |||
| Repeated Positioning Accuracy | 0.000118" | 0.003 mm | |||
| thers | |||||
| Air Required | 87~116 psi | 6~8 Bar | |||
| Coolant Capacity | 40 us gal | 180 L | |||
| Lubricating Oil Capacity | 0.79 us gal | 3 L | |||
| Control | FANUC Series 0i - MODEL F | ||||
Δ How to choose equipments?
This guide will help you to choose the best press machine equipments for your project.
1.STANDARD CONFIGURATION
| CONTENT | QUANTITY | NOTE |
| FANUC Control | 1 | |
| 10.4 Inch TFT Color Display | 1 | |
| Heat Exchanger for Electric Control Cabinet | 1 | |
| Automatic Lubrication Device | 1 | |
| Full Frame Protection | 1 | |
| Electric Control Cabinet Dustproof Device | 1 | |
| Signal Lamp | 1 | |
| Rigid Tapping | 1 | |
| Cutting Fluid Cooling Device | 1 | |
| Spindle Air Curtain Protection | 1 | |
| LED Working Lamp | 1 | |
| Feet Bolt and Heel Block | 6 | |
| Air Blowing Device | 1 | |
| Work-box/Kit | 1 | |
| Transformer | 1 | |
| Triaxial Protective | 1 | |
| Safety Switch Device of Door | 1 | |
| RS232Communication Interface & CF Card Slot | 1 | |
| Cleaning Air Gun Interface | 1 | |
| Pneumatic unclamping Button | 1 | |
| Detachable Hand Wheel | 1 | |
| Oil-Water Separating Device | 1 | |
| Open M codes Function | 4 | |
| PLC & 4th and 5th axis Function is filled and opened | 1 | |
| Water Cooling Side Through | 1 | |
| Vertical Disc type Magazine with Manipulator | 24 | CAM Technology |
2.OPTIONAL CONFIGURATION
| CONTENT | QUANTITY | NOTE |
| Roller Linear Guide Rail for 3 Axis | 1 | |
| Water Cooling Center Through | 1 | 20 Bar |
| Automatic Power Off | 1 | |
| Chain Chip Conveyor | 1 | Standard or Rear Type |
| Air Conditioner for Electric Cabinet | 1 | |
| Water Gun | 1 | |
| 32-tools Magazine | 1 | |
| 10000 rpm & 12000 rpm Spindle | 1 | With Oil Cooling |
| RENISHAW TRS2 | 1 | |
| Automatic Door | 1 | |
| Air Density Detection | 1 | |
| Spray System | 1 |
WUXI GOLP CNC MACHINERY CO.,Ltd is located in Wuxi--the core location of the Changjiang Delta which is the most dynamic economy area in China. We are a new brand company specializing in the CNC machine tool industry. The company is mainly engaged in Die-casting machine, CNC Punching machines, Powder compacting machine and other new intelligent machine and related supporting products. The company adheres to the business philosophy --Professional quality, Credibility first, Customer first, and is committed to the development goal of becoming an important member of the global market in the field of intelligent machines.
Q:How the product is packaged?A:Dustproof and waterproof packing is for the machine and related accessory, all parts fixed on the metal pallets.
Q: How many machines can be loaded in a 40HQ container?
A: One 40HQ container can load 1-2 sets EM series CNC Machining Machines.
Q: How long is the product warranty period??
A: The CNC Machining Center Machine warranty is for 24 Months,Warranty period: due to quality problems, the seller is obliged to provide to the buyer with replacement parts at no cost to the buyer. Parts are transport by air within 25 kg, otherwise transport by sea. Transport is paid by seller. Damage resulting from improper use or miss-operation will be at the buyer's responsibility and th seller provides the components at a cost.
Q:What's your payment terms?
A:T/T,L/C,Paypal,Western Union etc.
Q: Are you a trading company or a manufacturer?
A: We are a professional manufacturer. Our products have been exported to Asia, South America, Africa, and have developed a good world wide reputation.
