Ert Cable for Resistivity, Self Potential and Induced Polarization (IP) Measurements in Geological and Geographic Surveying for Abem, Ares, Iris and Pasi

Price $1.00 Compare
Min Order 1 Meter
Shipping From Shaanxi, China
Popularity 250 people viewed
Quantity
+-
 

SEIS TECH INC.

VIP   Audited Supplier 6 years
Profile Certified by SGS/BV
ERT Cable
<1mm
1
1
Split Spring Take-out / Mueller Clip Take-out
7.0mm /9.0mm
27-Pin, 32-Pin, 50-Pin, 55-Pin, 60-Pin, 61-Pin
3m, 5m, 10m and etc.
5m, 10m, 20m and etc.
SEIS TECH
Standard Export Carton
21 Channel / 28 Channel / 30 Channel / 32 Channel
China
9015900090
Product Description

The ERT cables are made to used for resistivity, self potential and induced polarization(IP) measurements, which usually work with multi-electrode resistivity instruments and switch boxes in the high-density resistivity exploration for mineral resources, hydrology, engineering, environments and etc.

- Ideal for automatic transfer of multi-electrode.

- Split Plate Electrode take-out  or Wire Wrap Electrode take-out is optional.

- Suitable for Resistivity Meters and Devices such as ABEM, ARES,  IRIS, PASI RM1 Earth Resistivity Meter and etc.

- Lighter weight but maintaining the same low noise level.

- Robust design, strong mechanical strength, cold resistance and good insulation performance.

- 12 Channel / 18 Channel / 21 Channel /24 Channel / 28 Channel / 30 Channel / 32 Channel / 42 Channel / 56 Channel are optional.

- Custom electrode numbering, section size, take-out type and spacing is available upon request

TypeCable O.DN.W/km(kgs)Tensile StrengthWorking Temperature(ºC)
 32 cores  7.2mm  56kgs  70kgs  -40ºC~+70ºC 
54 cores9.2mm90kgs90kgs
66 cores9.2mm96kgs110kgs
Structure of Cable Conductor
(Per core)
7nos.of Bare Copper Wires Stranding
(Copper Wire O.D. 0.12mm)
Insulation Resistance≥1000 MΩ/km
Cross Section (Per core)0.08mm2
DC Resistance(20ºC)≤234Ω/km
Voltage Withstand Value (Per core)1000V
Current-Carrying Capacity per core(constant current)≤1A
Channel Numbers 21-channel (AB line) / 28-channel / 30-channel / 32-channel / 42-channel / 56-channel optional.
Custom electrode numbering available upon request.
Cable Outer Diameter7.2mm / 9.2mm available
Connector Type27-pin Connector / 32-pin Connector
50-pin Connector / 55-pin Connector
60-pin Connector / 61-pin Connector
Connector Lead-in type4m / 5m / 7m / 10m / 12m cable lead-in at one end or both ends.
Custom cable lead-in length available upon request.
Electrode take-out Split spring take-out / molded split spring take-out / Mueller clip take-out / KCK take-out / Kooter take-out / wire-wound take-out / encapsulated stainless electrode take-out optional
Electrode Spacing3m / 5m / 6m /10m / 20m optional.
Custom takeouts spacing available upon request.
Working Temperature-40ºC ~ +70ºC


Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA