Audited Supplier
1.Self drilling anchor system has two performances: the one is drilling, the other one is grouting. It features a hollow bore for flushing, or simultaneous drilling and grouting.
2.Self drilling anchor system is reliable, efficient and convenient, which makes high piling output possible.
3.We can also make the Hot-Dip Galvanizing Corrosion Protection according to EN ISO1461
Features of Hollow Grouting Anchor Bar:
• Fits standard Boomer, ROC and Mustang rigs.
• Particularly suitable for difficult ground conditions.
• A high rate of installation since drilling, placing and grouting can be performed in one single operation.
• Self drilling system eliminates the requirement for a cased borehole.
• Installation with simultaneous drilling and grouting possible.
• Easy installation in all directions, also upwards.
• Suitable for working in limited space, height and in areas of difficult access.
• Simple post grouting system.
• Hot-dipped galvanizing for corrosion protection
R-Thread Anchor Rod Technial Data
| R25N | R32N | R32S | R38N | R51L | R51N | T76N | T76S | |
| Outside diameter (mm) | 25 | 32 | 32 | 38 | 51 | 51 | 76 | 76 |
| Internal diameter (mm) | 14 | 19 | 16 | 19 | 36 | 33 | 52 | 45 |
| Ultimate load capacity (KN) | 200 | 280 | 360 | 500 | 550 | 800 | 1600 | 1900 |
| Yield load capacity (KN) | 150 | 230 | 280 | 400 | 450 | 630 | 1200 | 1500 |
| Tensile strength, Rp0.2 (N/mm2) | 800 | 800 | 800 | 800 | 800 | 800 | 800 | 800 |
| Yield strength, Rp0.2 (N/mm2) | 650 | 650 | 650 | 650 | 650 | 650 | 650 | 650 |
| Weight (Kg/m) | 2.3 | 3.2 | 3.6 | 5.5 | 6.5 | 8.0 | 16.0 | 19.7 |
| Thread type (left-hand) | ISO 10208 | ISO 1720 | MAI T76 Standard | |||||
| Steel grade | En10083-1 (Alloy structure steel) | |||||||
| Compared to carbon steel, alloy structure steel has high anti-corrosion capacity and high mechanical. | ||||||||
Thread size: R25, R32, R38, R51, T76.
Thread standard: ISO10208, ISO1720 etc.
T-Thread Anchor Rod Technial Data
| Bar Type | Outside Diameter (mm) | Inside Diameter (mm) | Cross section (mm2) | Ultimate Load KN | Yield Point KN | Weight (kg/m) | Thread Left/ Right Hand |
| T30/11 | 30 | 11 | 446 | 320 | 260 | 3.3 | Lift or right |
| T30/14 | 30 | 14 | 395 | 260 | 220 | 2.9 | Lift or right |
| T30/16 | 30 | 16 | 382 | 220 | 180 | 2.7 | Lift or right |
| T40/16 | 40 | 16 | 879 | 660 | 525 | 7.0 | Lift or right |
| T40/20 | 40 | 20 | 726 | 539 | 430 | 5.6 | Lift or right |
| T52/26 | 52 | 26 | 1337 | 929 | 730 | 10.0 | Lift or right |
| T73/53 | 73 | 53 | 1160 | 1630 | 970 | 12.3 | Lift or right |
| T73/56 | 73 | 56 | 1094 | 1414 | 785 | 11.1 | Lift or right |
| T73/45 | 73 | 45 | 2265 | 1630 | 1180 | 17.8 | Lift or right |
Thread size: T30, T40, T52, T73, T103, T127, T130.
Thread standard: ISO10208, ISO1720 etc.
Anchor Plate
| R25N | R32N | R32S | R38N | R51L | R51N | T76N | T76S | |
| Dimention (mm) | 150*150 | 200*200 | 200*200 | 200*200 | 200*200 | 250*250 | 250*250 | 250*250 |
| Thickness (mm) | 8 | 10 | 12 | 12 | 20 | 40 | 40 | 40 |
| Hole diameter (mm) | 30 | 35 | 35 | 41 | 60 | 60 | 80 | 80 |
| Weight (KG/PC) | 1.4 | 3 | 3.7 | 3.6 | 8.8 | 18.5 | 18 | 18 |
| Cold deformed with geometry | ||||||||
Anchor Coupling
| R25N | R32N | R32S | R38N | R51L | R51N | T76N | T76S | |
| Outside diameter (mm) | 35 | 42 | 42 | 52 | 63 | 63 | 95 | 95 |
| Length (mm) | 120 | 145 | 160or190 | 180 | 180 | 200 | 200 | 200 |
| Weight | 0.45 | 0.7 | 0.75 | 1.4 | 1.7 | 1.9 | 6.4 | 6.4 |
| Machined steel coupling middle stop | ||||||||
The coupling enables direct end-to-end energy transmission between each bar, reducing losses and ensuring maximum percussive engergy at the drill bit.
Drill Bit
| R25N | R32N | R32S | R38N | R51L | R51N | T76N | T76S | |
| Diameter (mm) | 41,51 | 51,76,90 | 90,100,110,115,130 | 130,150,160,180,200 | ||||
| Hardened cross bit (EX) | Hardened cross bit for loose to medium dense condition with small boulders. | |||||||
| Tungsten cross bit (EXX) | TC cross bit for soft to medium rock for mations | |||||||
| Hardened button bit (ES) | Hardened buuton bit for unconsolidated rock with boulders. | |||||||
| Tungsten carbon button bit (ESS) | Button bit with TC inserts for medium rock for formations. | |||||||
| Hardened arch bit (EC) | Hardened drill bit with optimized geometry for uncon solid dated soil with small boulders. | |||||||
| Tungsten carbon arch bit (ECC) | TC drill bit with optimized geometry for soft to medium rock formations. | |||||||
| Hardened drop center bit (EY) | Hardened cross bit for loose to medium dense ground conditions | |||||||
| TC drop center bit (EY) | TC drill bit for soft to medium rock formations. | |||||||
| Casting clay bit (EW) | Casting clay bit with optimized geometry for very soft to soft caly. | |||||||
| Machined steel bit or Casring steel bit | ||||||||
Choose suitable bits according to different soil type.
Anchor Nut
| R25N | R32N | R32S | R38N | R51L | R51N | T76N | T76S | |
| Key size (mm) | 41 | 46 | 46 | 50 | 75 | 75 | 100 | 100 |
| Length (mm) | 135 | 45 | 45 | 55 | 70 | 70 | 80 | 80 |
| Weight (kg/pc) | 0.25 | 0.35 | 0.35 | 0.5 | 1.55 | 1.55 | 3.6 | 3.6 |
| Machined steel nut or casting steel nut | ||||||||
The hexagonal and spherical nuts are made from high precision steel (40Cr,HRC 20-25) to meet the stringent demands on anchor specifications and the daily uses of reinforcement work.
All nuts exceed the ultimate strength of the rod.
Hebei Langben Building Materials Co, Ltd is subsidiary company of Handan Zhongfu Industrial and Mining Accessories Co., Ltd. with office based in Hebei province China, was was incorporated in 2011 to provide quality, reliable, durable and efficient products and services within the Mining and Industrial Industry. Currently the company is into mining and industrial product manufacturing and supplies. Our main product categories are :
a) resin capsules
b) mining roof support rockbolt, split set bolt
c) mining surface support mesh, w strap, dome plate
d)other roof support products used in underground mining
In order to deliver value to our customers we have partnered with competitive and established manufacturers worldwide.
1. Who are we?
We are based in Hebei, China, start from 2011,sell to Domestic Market(50.00%),Southeast Asia(30.00%),Africa(10.00%),Mid East(5.00%),Eastern Asia(5.00%). There are total about 200 people in our office.
2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.What can you buy from us?
Anchor rod,Rock self-drilling anchor,Welded Wire Mesh Pieces,Prestressing Thread Steel Bar for Bridge,Domed Nut
4. Why should you buy from us not from other suppliers?
Hebei Jiufu Industrial and Mining Parts Co., Ltd. was established in 2012, with an annual export volume of 12,000 tons and annual sales of 50 million US dollars. It has 14,000 square meters of standardized industrial plants, 2 large raw material warehouses
5. What services can we provide?
Accepted Delivery Terms: FOB,CIF,EXW,Express Delivery;
Accepted Payment Currency:USD;
Accepted Payment Type: T/T,Credit Card,Western Union,Cash;
Language Spoken:English,Chinese
