DMX Moving Head Disco Stage Special Effect Wedding Party Smoke Bubble Machine

Price $385.00 Compare
Min Order 2 Pieces
Shipping From Guangdong, China
Popularity 359 people viewed
Quantity
+-
 

Guangzhou Suyi Electronics Co., Ltd

VIP   Audited Supplier 1 year
Profile Certified by SGS/BV
SY-BF3000
1.2
Double Wheel
1500
Remote Control
100m²
CE, RoHS
110V-240V
Black
8min
48W*3
DMX \ LED panel \ Remote
8 Channels
CE/RoHS/FCC
Party/Stage/Concert/Stadium/DJ/Wedding
4 Colors (Red, Green, Blue, White)
50Hz-60Hz
NO
Carton Box
1pcs/carton
China
7308900000
Product Description


DMX Moving Head disco stage special effect wedding party smoke bubble machine
 

Product Description

Fog smoke bubble machine
Voltage
AC110-240V 50-60Hz
Power
1500W
 
Heat-up Time
8min
 
Fuel Tank Volume
1.2L
LED
48*3w 
Control mode
DMX \ LED pannel \ Remote
DMX channels
4 channels
Product Size
66*43*44cm
Weight
25kg
 
Certificate
CE/RoHS/FCC
Application
Party/Stage/Concert/Stadium/DJ/Wedding etc
 
Steps To Use:
Step 1: 
First place the equipment on a flat ground, and leave at least 50 cm of space around the equipment machine.
Step 2: 
Pour bubble oil and mist oil into the corresponding marked boxes. Remember not to put them in different boxes by mistake.
Step 3: 
Plug the machine's power cord into the corresponding socket and turn on the machine. Turn the power switch to the pointed"ON" position and see what appears on the LCD display.
Step 4:
"Preheating" will light up on the display, and after a few minutes the screen will show "Ready" to indicate that heating is complete.
Step 5:
Use the control panel. Set the device to the desired operating mode by operating the touch screen.
Step 6: 
When finished using, turn off the device. Press the power switch to the "OFF" position and unplug the power cord from the outlet.
Step 7: 
If the equipment needs to be transported, the tank needs to be emptied through the connecting pipe and drain valve before transportation.

 



 

 

Company Profile

Guangzhou Suyi electronics have more than 10 years working experience, has always focused on the development and innovation of digital  speaker,and Stage performance special effects products.We own independent intellectual property rights and the core technology of Acoustics. Our products have been sold to over 30 countries and regions, cover four main application are5 by being a true partner with our customers and strong designing and developing ability. With strict Q.C. and strong development ability, welcome to visit us.

 

 

Certifications


 

Packaging & Shipping


FAQ

 
FAQ
1.If the machine's ventilation is closed, can bubbles still emerge from the ventilation?
Answer: Yes, they can still spray out, but the bubbles won't reach the same height as when the ventilation is open.
2.If the air outlet is adjusted upward, can the bubbles reach a higher height?
Answer: Yes, adjusting the outlet upward will make the air blow upward, causing the bubbles to spray higher.
3.Does the product's LED light have a gradient effect?
Answer: Yes, it does.
4.How should the oil pump and nozzle be maintained?
Answer: After using bubble oil, spray clean water until the remaining bubble oil is expelled. No special treatment is needed for smoke oil.
5.How many hours can a 1.2L bucket of oil last?
Answer: Using the maximum smoke output, it lasts approximately 2 hours. At 15% smoke output, it can last around 6 hours.
6.Is the ratio of oil consumption between bubble oil and smoke oil 2:1?
Answer: Yes, that's the correct ratio. Bubble oil tends to be used up faster.
7.After using the oil, should it be poured out? How should it be cleaned and maintained?
Answer: No need to pour it out. Just filter the bubble oil pump with clean water until residual oil is expelled. Wipe it clean with a towel afterward.
8.In which places or scenarios are these smoke machines mainly suitable?
Answer: They are primarily suitable for bars, wedding halls, general event performances, birthday parties, live broadcasts, etc.
9.After use, the ground may have oil. What should be done? How long does an event last, and how much oil should be prepared?
Answer: Simply mop the oily floor with clean water. A full oil bottle in the machine is generally sufficient for one event,lasting about an hour, with each spray lasting around five minutes.
Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA