Audited Supplier
YQL-200/5, YQL-150/5, YQL-120/5, YQL-100/5
Hydraulic Machine
Free Forging
Hydraulic Pressure
Automation
ISO9001
Customized
Work Flexible
New
Joohonor
Export Simple Packing
Screw diameter: 150 mm, Extrusion: 15 ~ 35 kg/min,
China
Product Description
1. Extruder Introduction
Lead coating is one of the best materials to improve the service life of high voltage cables
The continuous extruder is mainly used to cover wire and cable with lead or to cover rubber pipes with lead vulcanization.
In this unit, the lead material is transported from bottom to top by means of vertical rotation of the screw to achieve continuous extrusion, so that the thickness of the lead layer can guarantee the uniformity in the longitudinal direction of the lead pipe. Because the temperature of each part can be controlled strictly, the extrusion pressure and temperature can be kept constant, so as to ensure that the error value of lead thickness can be controlled in the minimum range.
Because the furnace, purification and heat preservation furnace and lead liquid transportation all adopt sealing system, the lead vapor diffusion is greatly reduced, and the environment pollution is basically eliminated.
This equipment is easy to operate and easy to master.The equipment also has the advantages of light weight, small area, low operating intensity.
2. Main Features
2.1 The outer diameter of the lead layer can be between 40 and 160mm, which can be achieved through two sets of extrusion modules, one with a diameter of 20 to 40mm and the other 40 to 11mm.The user can choose any of them.
2.2 Screw feed lead, can achieve continuous extrusion, lead layer thickness to maintain a constant, longitudinal uniform.
2.3 In addition, the unique design of strictly controlling the temperature of each section keeps the temperature and extrusion pressure constant. Therefore, the thickness of the lead layer can be controlled within the minimum tolerance.
2.4 The consumption of lead is 10% lower than that of an intermittent lead press.
2.5 Environmental protection humanized design: because the furnace, purification and heat preservation furnace and lead liquid transportation all adopt sealing system, greatly reduce the lead vapor diffusion, basically eliminate the environmental pollution.
2.6 The machine needs small area, easy to operate, low labor intensity, because the machine only needs two operators.
3. Technical parameters
4. Main parameters of YQL/5 series extruder are listed in the reference table
5. Reference Pictures
Lead coating is one of the best materials to improve the service life of high voltage cables
The continuous extruder is mainly used to cover wire and cable with lead or to cover rubber pipes with lead vulcanization.
In this unit, the lead material is transported from bottom to top by means of vertical rotation of the screw to achieve continuous extrusion, so that the thickness of the lead layer can guarantee the uniformity in the longitudinal direction of the lead pipe. Because the temperature of each part can be controlled strictly, the extrusion pressure and temperature can be kept constant, so as to ensure that the error value of lead thickness can be controlled in the minimum range.
Because the furnace, purification and heat preservation furnace and lead liquid transportation all adopt sealing system, the lead vapor diffusion is greatly reduced, and the environment pollution is basically eliminated.
This equipment is easy to operate and easy to master.The equipment also has the advantages of light weight, small area, low operating intensity.
2. Main Features
2.1 The outer diameter of the lead layer can be between 40 and 160mm, which can be achieved through two sets of extrusion modules, one with a diameter of 20 to 40mm and the other 40 to 11mm.The user can choose any of them.
2.2 Screw feed lead, can achieve continuous extrusion, lead layer thickness to maintain a constant, longitudinal uniform.
2.3 In addition, the unique design of strictly controlling the temperature of each section keeps the temperature and extrusion pressure constant. Therefore, the thickness of the lead layer can be controlled within the minimum tolerance.
2.4 The consumption of lead is 10% lower than that of an intermittent lead press.
2.5 Environmental protection humanized design: because the furnace, purification and heat preservation furnace and lead liquid transportation all adopt sealing system, greatly reduce the lead vapor diffusion, basically eliminate the environmental pollution.
2.6 The machine needs small area, easy to operate, low labor intensity, because the machine only needs two operators.
3. Technical parameters
| No. | Item | Technical parameters |
| 1 | Cable diameter | Normal diameter ф 8 mm ~ 130 mm |
| 2 | Lead coating diameter | Normal outer diameter ф10mm ~ 135 mm |
| 3 | Main motor power | 110kw |
| 4 | Heating power of extruder | 24kw |
| 5 | Small die seat heating power | 24kw |
| 6 | Large die seat heating power | 30kw |
| 7 | Ω tube heating power | 3kw |
| 8 | 18 tons of furnace heating power | 141kw |
| 9 | 10 ton furnace heating power | 103kw |
| 10 | Other auxiliary pump parts | ~10kw |
| 11 | Total power of equipment | ~ 420kw (excluding retraction) |
| 12 | Power supply | AC380V 50 hz |
4. Main parameters of YQL/5 series extruder are listed in the reference table
| Name | 100/5Lead Extruding Machine | 150/5Lead Extruding Machine | 200/5Lead Extruding Machine |
| Lead sheath range (mm) | φ7~φ40150/5 | φ10~φ110(135) | φ40~φ160 |
| Cable range (mm) | φ5~φ35 | φ 8~φ130 | φ35~φ150 |
| Lead thickness (mm) | 0.8~2.0 | 1.2~4.0 | 1.8~4.6 |
| Screw diameter (mm) | 100 | 150 | 200 |
| Die seat range (mm) | φ7~φ40 | φ10~φ70 | φ40~φ160 |
| φ40(25)~φ110 | |||
| Special φ60~φ135 | Special φ70~φ190 | ||
| Maximum yield (kg/min) | Pure lead 9 ~ 12 | Pure lead 18 ~ 30 | Pure lead 30 ~ 45 |
| Soft alloy lead 6 ~ 9 | Soft alloy lead 15~22 | Soft alloy lead 15~26 | |
| Hard alloy lead | Hard alloy lead 13~20 | Hard alloy lead 13~24 | |
| Plate cooler (m2) | 8m2 | 12m2 | 15m2 |
| Stainless steel tank (m3) | 1.0 m3 | 1.2 m3 | 1.5 m3 |
| Cooling pool ( m3 ) | 30 m3 ( With cooling tower ) | 50 m3 ( With cooling tower ) | 100 m3 ( With cooling tower ) |
| Cooling water circulation | 20 t/h | 25 t/h | 30 t/h |
| Motor power | 55 kw DC or AC | 110 kw DC or AC | 132 kw DC or AC |
| Furnace configuration (T) | 10T×1 | 10T×1,18T×1 | 18T×2 |
5. Reference Pictures
