Audited Supplier
INI-E615
Organic Silicone
Medical, Industrial
ISO, FDA, REACH, RoHS
Moulding
Ini-E615
Translucent
15 Shore a
1:1/10:1
Less Than 0.1%
500%
25
6
30-50 Minutes
3-5 Hours
25c
1900 Cps
Food and Medical
200kgs
INIBABA
25kg
drum
Shenzhen, China
39100000
Product Description
Mold Making Silicone
INI-E615
Description
Two-component silicone, platinum-curing/ addition-cure type, flowable, vulcanizes at room temperature or heated temperature.
Can be used for a long time in the temperature range of - 65 ° C - 200 ° C and keep its soft and elastic properties.
Application
- Suitable for molding variety of products in large quantity, such us art crafts, furniture, architectural elements, garden ornaments, shoe, tire, soap, candle, vacuum bagging, wind turbine blades, ship/boat hulls, aircraft hulls, FRP pipes/profiles, beacon lighthouse covers, military industry, aviation and other fields etc.
- Suitable for materials such as resin, PU, PVC, polyester, gypsum/plaster, wax etc.
Features & Advantages
- Food grade, FDA
- Low shrinkage
- Low viscosity
- Anti-deformation
- High temperature resistance
- Not oily
- No bubbles
- Excellent flow leveling which will copy finest details and patterns from exquisite products.
- Durable with excellent tear and tensile strength, guarantee molding times
- Easily demolding
- Resist aging, acid, alkali, corrosion and weather aging
| Properties Index | Test Report | |
| Before Curing | Appearance | Translucent fluid |
| Viscosity(cps) | 1900±500 (Adjustable) | |
| Operating | Mixing Ratio (By weight) | 1 :1 or 10 :1 |
| Operating Time(25ºC /min) | 30~50 (Adjustable) | |
| Curing time (hr, basically cured) | 3~5 (Adjustable) | |
| Curing time (hr, perfectly cured) | 12 | |
| After Curing | Hardness (shore A) | 15±2 |
| Tear strength (kN/m) | 22±3 | |
| Tensile strength (Mpa) | 5±0.5 | |
| Shrinkage (%) | ≤0.1 | |
| Elongation (%) | 460~560 | |
| Density (g/cm) | 1.02 | |
Operation instructions
- Mix part A and pars B evenly with 1:1 mixing ratio.
- Mix part A and part B evenly. Otherwise the silicon rubber will be partly solidified which will make the finished molds meet a short life and waste silicon rubber.
2. Vacuum pumping
Notes: 1) This step is not have to have, but it is best if there is one. It will discharge all air in the mixture successfully, so as to ensure that therewill be no bubbles in the finished mold.
2) This step is less than 10 minutes. Otherwise, it
Will cause cross-linking reaction, and no more
further steps will be available.
- Pouring casting
Handing and Storage
- Precautions for safe handling:
Measures to prevent fire: Ensure good local exhaust ventilation. Keep container away from any sources of ignition or heat (e.g. open flames, hot surfaces). The work area should be equipped with the corresponding species and quantity of emergency equipment, spills emergency treatment equipment and appropriate storage material.
Measures to prevent aerosol and dust generation: Ensure good local exhaust ventilation.
Measure to protect the environment: Do not allow this products to be released to the environment without proper treatment.
Advice on general occupational hygiene: Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed.
- Conditions for safe storage, including any incompatibilities:
incompatible substances, feedstuffs, beverages and foods. Keep away from heat, sparks and flame. Treat carefully, avoid physical damage to containers. The storage area should be equipped with the corresponding species and quantity of emergency equipment, spills emergency treatment equipment and appropriate storage material.
Requirements for storage rooms and vessels: Keep container tightly sealed.
Package
5KG, 20KG, 25KG and 200KG per drum.
(There are metal drum and plastic drum for your choice for 5KG and 20KG)
Shelf life
Twelve(12) months when stored under dry and cool place by original package under 25ºC.
For silicone requirements, please contact Mr JoeWhatsapp
