Audited Supplier
DL-F1850
1 Year
Non-Woven Facial Towel
Automatic
ISO9001: 2000, SGS
Customized
New
Online Support
100-120m/Min
5.5kw
DELE
PE Film/Wood Case
Dimension 3800*1800*1400mm
China
8451500000
Product Description
DL-F1850 perforation slitting rewinding machine
1. Mechanical properties:- Main part: The frame of the whole machine adopts national standard 10# channel steel to ensure the stable performance of high-speed operation.
- Feeding part: the lifting method of the air expansion shaft driven by the cylinder and pneumatic double arms, equipped with a 76mm expansion air expansion shaft
- Feeding part: steel and rubber rollers are conveyed simultaneously.
- Conduit part: all use high-precision hard anodized aluminum alloy wrinkle-removing roller guide cloth, and all achieve dynamic balance.
- Break point part: servo motor combined with spiral bonding perforation method, light and low noise. (Line spacing ≥10cm adjustable)
- Slitting part: Use 10 sets of upper and lower air knives for slitting.
- Winding part: double-roller surface winding, and is equipped with a precision proportional valve to control the entire exhaust pressure and compression adjustment device.
- Counting part: photoelectric induction (encoder counting function) is adopted.
- Main technical parameters:
- Materials: Nonwoven fabric,such as spunlace spunbond.
- Rewinding diameter: ≤800mm
- Unwinding diameter: ≤1000mm
- Materials Gsm: 12-100Gsm
- Inner diameter of paper tube: 76mm
- Raw materials effective width: 1850mm
- Roller surface width: 1850mm
- Perforation distance: ≥100mm ,Adjustable setting on touch screen
- Mechanical speed: 80M/min, the operating speed can be limited according to the requirements of the other party;
- Counting accuracy: ±0.5%
- Winding neatness: ±2.0mm;
- Maximum loading and unloading weight: 240KG
- The weight of the whole machine is about 1.8T;
- Compressed air pressure requirement: about 6KG;
2,Motion delivery system:
(1) All sprocket and chain drive methods are adopted.- Winding device:
- Double drum surface winding;
- Air expansion shaft winding: the winding tension is constant, the winding density is uniform, and the elasticity is adjustable;
- The entire exhaust pressure and compression adjustment device adopts linear slide rails at both ends to move up and down, and the tooth rows are parallel to position the winding press roller.
- Electrical control system:
2.Meter counter;
3.Unwinding tension is controlled by synchronous belt synchronous conveying;
4.Other related electrical appliances: adopt the "Delta" brand made in Taiwan;
Pneumatic component control system: all adopt Taiwan "AirTAC" and "Xingong"brands;
Company Show:
FAQ:1.You are a trade company or factory?
We are a Manufacturer and trade company.
2.Does one machine can only produce one size?
Not exactly, it depends on the machine.
3. How to visit your company?
Our company located at Dexing City Jiangxi Province ,We can pick you up from Nanchang airport. Or railway station Shangrao station.
4. What can you do if the machine is broken?
Our machine's warranty period is 12months. if the broken parts can't repair, we can send the new parts to replace the broken parts, but you need to pay the express cost by yourself. if after the warranty period, we can through negotiation for solving the problems, and we supply the technical support for the whole life of the equipment.
5.Can you be responsible for transport?
Yes, please tell us the destination port or address. we have rich experience in transport.
6.Do you provide customized?
Sure, we can design the equipment according to the data of the structural section you provide. We are a professional sheet metal forming machine designer and manufacturer.
7. Why should we choose your company?
>Certified company with CE certificates.
>Various production line, covering more than 30different kinds of professional machinery to produce Nonwoven Fabric.
>Advanced technical support and strict quality management system.
>High-efficiency and timely service by E-mail, Whatsapp,Facebook,etc.
