Audited Supplier
JCTG
Lubricated
Air Cooling
AC Power
Horizontal
Closed Type
Stationary Type
Single Screw Compressor
7.5-22kw
0.9-3.6 M3/Min
0.8/1.0/1.6 MPa
Direct-Driven
Variable Frequency
Leadcom
Wodden Box
1850X1030X1880
China
841480
Product Description
| JCTG Series Parameter Table | ||||||||||
| Model | Rate Power | Pressure | F.A.D | Air Tank Capacity | Connection | Dimension | Weight | |||
| kW | HP | MPa | bar | m3/min | CFM | L | mm | kg | ||
| J7.5CTG-8 | 7.5 | 10 | 0.8 | 8 | 1.1 | 38 | 250 | G3/4'' | 1450X860X1585 | 350 |
| J7.5CTG-10 | 1.0 | 10 | 0.9 | 31 | ||||||
| J11CTG-8 | 15 | 11 | 0.8 | 8 | 1.6 | 56 | 400 | G3/4" | 1850X1030X1880 | 510 |
| J11CTG-10 | 1.0 | 10 | 1.4 | 49 | ||||||
| J11CTG-16 | 1.6 | 16 | 1.0 | 35 | ||||||
| J15CTG-8 | 15 | 20 | 0.8 | 8 | 2.6 | 91 | 400 | G3/4'' | 1850X1030X1880 | 510 |
| J15CTG-10 | 1.0 | 10 | 2.0 | 70 | ||||||
| J15CTG-16 | 1.6 | 16 | 1.5 | 53 | ||||||
| J22CTG-8 | 22 | 30 | 0.8 | 8 | 3.6 | 127 | 400 | G1'' | 1850X1030X1880 | 560 |
| J22CTG-10 | 1.0 | 10 | 3.0 | 106 | ||||||
| J22CTG-16 | 1.6 | 16 | 2.3 | 81 | ||||||
Comparison between permanent magnet motor and ordinary asynchronous motor
Compared with electrically excited motors, permanent magnet motors have the following advantages:
High efficiency
Eliminate excitation system loss, improve efficiency 5-12%, high power factor, large torque inertia ratio, stator current and stator resistance loss reduction, and rotor parameters can be measured, good control performance, motor direct drive, no speed slip, no bearing and connection transmission, efficiency increased by more than 3%, light load than the same specification asynchronous motor efficiency increased by 15-35% or so. Always efficient regardless of light load or heavy load. At present, the energy efficiency of permanent magnet motors used by Hylein has reached the national level 1 energy efficiency standards.
Low noise
Reasonable magnetic field design, magnetic density distribution, wider operating frequency range, lower operating noise. Truly constant air pressure: open loop vector control, response time < 50ms, can adjust gas production in an instant over a wide range.
Compact structure, small size, light weight, high precision and fast response
The exciting winding and the exciting power supply (magnetic pole core) are eliminated, and the structure is simple, the operation is reliable and the maintenance is convenient.
High starting torque
The starting torque and overload capacity of permanent magnet synchronous motor are one power level higher than that of three-phase asynchronous motor, and the ratio of the maximum starting torque to the rated torque can reach more than 3 times, while the general asynchronous motor is only 1.6 times.
High efficiency
Eliminate excitation system loss, improve efficiency 5-12%, high power factor, large torque inertia ratio, stator current and stator resistance loss reduction, and rotor parameters can be measured, good control performance, motor direct drive, no speed slip, no bearing and connection transmission, efficiency increased by more than 3%, light load than the same specification asynchronous motor efficiency increased by 15-35% or so. Always efficient regardless of light load or heavy load. At present, the energy efficiency of permanent magnet motors used by Hylein has reached the national level 1 energy efficiency standards.
Low noise
Reasonable magnetic field design, magnetic density distribution, wider operating frequency range, lower operating noise. Truly constant air pressure: open loop vector control, response time < 50ms, can adjust gas production in an instant over a wide range.
Compact structure, small size, light weight, high precision and fast response
The exciting winding and the exciting power supply (magnetic pole core) are eliminated, and the structure is simple, the operation is reliable and the maintenance is convenient.
High starting torque
The starting torque and overload capacity of permanent magnet synchronous motor are one power level higher than that of three-phase asynchronous motor, and the ratio of the maximum starting torque to the rated torque can reach more than 3 times, while the general asynchronous motor is only 1.6 times.
Oil cooled machine
Core Ndfeb magnetic steel, not only high temperature 180ºC, and energy efficiency level is higher than IE5. The heat loss is small and the efficiency is high under the same power.
Reliable intake valve system
Unique structural design, reliable intake valve system, do not have to worry about emergency shutdown and sudden power outage oil injection.
The oil and gas pipe of the whole machine are made of stainless steel material or imported hose, which is durable and not aging. It is sealed with thread and flat O-ring, easy to disassemble without leakage.
Core Ndfeb magnetic steel, not only high temperature 180ºC, and energy efficiency level is higher than IE5. The heat loss is small and the efficiency is high under the same power.
Reliable intake valve system
Unique structural design, reliable intake valve system, do not have to worry about emergency shutdown and sudden power outage oil injection.
The oil and gas pipe of the whole machine are made of stainless steel material or imported hose, which is durable and not aging. It is sealed with thread and flat O-ring, easy to disassemble without leakage.
Rear exhaust design to suck instead of blow
Fans dissipate heat faster and make less noise. The traditional fan blows against the cooler, which has large resistance and loud noise. The back row is cooled, and the cooler is placed vertically to avoid the dust falling on the cooler from the top down, which will lead to slow blockage for a long time. This design avoids.
New oil-cooled motor
Mold forming, no welding points, no risk; Rotary oil passage circulation, small pressure difference; It's a circular surface; Circular surface type oil passage, full oil flow, uniform cooling oil passage in the outside, easy to repair and maintenance.
Fans dissipate heat faster and make less noise. The traditional fan blows against the cooler, which has large resistance and loud noise. The back row is cooled, and the cooler is placed vertically to avoid the dust falling on the cooler from the top down, which will lead to slow blockage for a long time. This design avoids.
New oil-cooled motor
Mold forming, no welding points, no risk; Rotary oil passage circulation, small pressure difference; It's a circular surface; Circular surface type oil passage, full oil flow, uniform cooling oil passage in the outside, easy to repair and maintenance.
Quality Upgrade Three Lightspots
Leadcom is a professional manufacturer focusing on air compressors and vacuum pumps. It originated from Linghein and was later acquired by Atlas Copco. Then the original team rebuilt Leadcom with their rich experience.
With 25 years of manufacturing experience, Leadcom has strong R&D and production capabilities
The first permanent magnet air compressor was developed and produced by our team. The annual output can arrive 12000 sets, covering 15 series and 150 kinds of specifications, capable of meeting diverse customer needs in various industries.
Leadcom has a professional and dedicated customer service team that is always on standby to offer prompt and effective solutions. Whether it's providing pre-sales consultations to help customers choose the most suitable products according to their specific needs, offering meticulous installation guidance to ensure smooth setup, or delivering timely and efficient after-sales maintenance and repair services to minimize downtime, Leadcom spares no effort to guarantee customers' satisfaction.
In the future, Leadcom will adhere to professionalism and innovation, and strive to become a leading global manufacturer in this field.
Q1: Are you a manufacturer or trading company?
A1: We are a prestigious professional air compressor manufacturer proudly based in Guangzhou, China.
Q2: What is your delivery time?
A2: Our streamlined processes enable delivery within a swift 15 days. For urgent orders, please do not hesitate to reach out to our sales team in advance for customized arrangements.
Q3: What are the terms of payment?
A3: We offer flexible payment options including T/T, L/C, Paypal, etc. Additionally, we accept various currencies such as USD, RMB, Euro, and more.
Q4: How long could your air compressor be used?
A4: Our durable air compressors are engineered to serve you efficiently for an impressive span of over 10 years.
Q5: How long is your air compressor warranty?
A5: We offer a comprehensive one-year warranty for the entire machine from the moment it leaves our factory.
Q6: Do your company accept ODM & OEM?
A6: Yes, we enthusiastically undertake full ODM & OEM projects, crafting solutions tailored to your specific requirements.
Q7: How about your after-sales service?
A7: 1. We provide comprehensive online instructions for installation and commissioning to support our valued customers.
2. Our team of highly trained engineers is available for overseas service, ensuring expert assistance wherever you are located.
A1: We are a prestigious professional air compressor manufacturer proudly based in Guangzhou, China.
Q2: What is your delivery time?
A2: Our streamlined processes enable delivery within a swift 15 days. For urgent orders, please do not hesitate to reach out to our sales team in advance for customized arrangements.
Q3: What are the terms of payment?
A3: We offer flexible payment options including T/T, L/C, Paypal, etc. Additionally, we accept various currencies such as USD, RMB, Euro, and more.
Q4: How long could your air compressor be used?
A4: Our durable air compressors are engineered to serve you efficiently for an impressive span of over 10 years.
Q5: How long is your air compressor warranty?
A5: We offer a comprehensive one-year warranty for the entire machine from the moment it leaves our factory.
Q6: Do your company accept ODM & OEM?
A6: Yes, we enthusiastically undertake full ODM & OEM projects, crafting solutions tailored to your specific requirements.
Q7: How about your after-sales service?
A7: 1. We provide comprehensive online instructions for installation and commissioning to support our valued customers.
2. Our team of highly trained engineers is available for overseas service, ensuring expert assistance wherever you are located.
