Audited Supplier
JRWS001
Water
Ordinary Temperature
Electric
Thread
Direct Acting
PVC,Plastic
Low Pressure
Direct Action Diaphragm Structure
DC 12V / AC 220V
Safety, Emptying, Drain, Temperature Control, Flow Control
BS
Industrial Usage, Water Industrial Usage, Household Usage
0.02-1.0MPa
0-80degree (No Freezing)
1/2", 3/4"
Jery
1. Logo Standard Cartons 2.White Carton Box Withou
China
8481802190
Product Description
Overview
Size: G3/4"
Voltage:DC12V
Interface: Four exceptionally thread
Rated power:5W
Pressure: This is the micro-pressure valve (with pressure), issuitable for 0.02-0.8MPA pressure
Fluid: (0-100 ° C) water
Work: flat-rate system
Water flow characteristics (with pressure-type): 0.02Mpa> 1.5L / min; 0.10Mpa> 7L / min; 0.30Mpa> 12L / min; 0.80Mpa> 20L / min
Insulation: insulation resistance between conductors and non-conductor is greater than 100MΩ
Insulation class: E class insulation
Life: ≥50 thousand times (laboratory data) ≥30 million times (actually normal use)
Package Included:
1 X G3/4" DC12V Normally Close Water Solenoid Valve
Difference of the valve with and without Pressure:
If the water of outlets is sprayed then use the one with pressure (Work under 0.02~0.8Mpa )
If the water of outlets is small water flow then use the one without pressure (Work under 0~0.2pa )
Difference of normally closed and open one:
Normally closed: the solenoid valve have water when power on, and do not have water when power off
Normally open: the solenoid valve do not have water when power on, and have water when power off
Voltage Available:
Normal Voltage: DC12V DC24V AC220V
Support Customize Voltage: DC6V AC12V AC24V AC110V DC36V AC36V DC48V AC48V
Voltage:DC12V
Interface: Four exceptionally thread
Rated power:5W
Pressure: This is the micro-pressure valve (with pressure), issuitable for 0.02-0.8MPA pressure
Fluid: (0-100 ° C) water
Work: flat-rate system
Water flow characteristics (with pressure-type): 0.02Mpa> 1.5L / min; 0.10Mpa> 7L / min; 0.30Mpa> 12L / min; 0.80Mpa> 20L / min
Insulation: insulation resistance between conductors and non-conductor is greater than 100MΩ
Insulation class: E class insulation
Life: ≥50 thousand times (laboratory data) ≥30 million times (actually normal use)
Package Included:
1 X G3/4" DC12V Normally Close Water Solenoid Valve
Difference of the valve with and without Pressure:
If the water of outlets is sprayed then use the one with pressure (Work under 0.02~0.8Mpa )
If the water of outlets is small water flow then use the one without pressure (Work under 0~0.2pa )
Difference of normally closed and open one:
Normally closed: the solenoid valve have water when power on, and do not have water when power off
Normally open: the solenoid valve do not have water when power on, and have water when power off
Voltage Available:
Normal Voltage: DC12V DC24V AC220V
Support Customize Voltage: DC6V AC12V AC24V AC110V DC36V AC36V DC48V AC48V
Model | 2W160-10 | 2W160-15 | 2W200-20 | 2W250-20 | 2W350-35 | 2W400-40 | 2W500-50 | |
Working medium | Air,Water,Oil,Gas | |||||||
Operation | Directing Acting | |||||||
Acting Type | Normally Closed | |||||||
Office Size(mm) | 16mm | 20mm | 25mm | 35mm | 40mm | 50mm | ||
CV value | 4.8 | 7.6 | 12 | 24 | 29 | 48 | ||
Port Size | G3/8'' | G1/2'' | G3/4'' | G1 | G1 1/4'' | G1 1/2'' | G2'' | |
Operating pressure | Air:0~0.7Mpa ; Water:0~0.5Mpa ; Oil:0~0.5Mpa; Gas:0~0.7Mpa | |||||||
Max. Pressure Resistance | 1.05MPa | |||||||
Operating Temperature | -5~80ºC(The temperature can reach -5~150ºC if change the seal) | |||||||
Material of Body | Brass | |||||||
Seal Material | NBR, | |||||||
Buy Feedback
1.Q: Are you trading company or manufacturer ? A: Our factory in Ningbo Fenghua and our export office in Ningbo.
2.Q: What type of diaphragm used in oil media?
A: Usually, NBR, PTFE, and EPDM diaphragms are applicable in oil media.
3.Q: I have been told that 2-way valves only allow fluid flow in one direction is it correct?
A: Generally, 2-way valves allow fluid according to the cylinders. If there is a single-acting cylinder fluid flow in a single direction when a double-acting cylinder being used, fluid is able to flow in both directions.
4.Q: I am looking for a valve factory for a long term business relationship. What product you main specialized?
A: We've been in valve field since 2000s, mainly for solenoid valve, brass valve,screw air compressor solenoid valve, automobile valve,air treatment units and air suspension.
5.Q: I have a drawing for customized valve, can you do it?
A:Sure, we have our own CNC machine. No matter curved surface or complex process can be finished.
6.Q: Do you have stock for RTS?
A: Conventional products are fully stock on warehouse, once you place order, it will be send out in 1 day.
7.Q: We are concerned about the technical support after using your product. Any technical engineers can be provided?
A: Yes, our engineer 24 hrs onlineonce you contact.
8.Q: What methods of payment do you accept?
A: T/T, Paypal and credit card can be accept.
9.Q: What is the difference between a direct acting solenoid valve and a solenoid- pilot operated valve?
A: In a direct acting valve, the main body or poppet is moved using magnetic force generated by the electrical coil to shift the valve. In a solenoid-pilot operated valve, the main body or plunger is moved using force developed from the available pilot pressure. The coil in this case is used to control the pilot for the pilot piston.
10.Q: How many materials can be used apply to solenoid valve ?
A: Stainless steel 316L(Sanitary grades), Stainless Steel 316&304, Brass and cast steel.
11.Q:About samples
A:We can provide samples production and service. Usually 4 to 7 days, the sample can be sent to your hands. We will choose the shipping way as you required: by sea,by air,by express ect. Any question about samples, please contact us.
12.Q:For OEM products
A:We will finish the production within 20 days after payment has been confirmed.
