Audited Supplier
KM-91H-6D
7X24 Hours
1 Year
CE, ISO
New
Customized
Automatic
Horizontal
1/8''-2'' 4sh
Yellow
380V
3kw
122mm
28mm
1.5s
6s
480times/Hour
69 dB
12 Sets
30MPa
310kg
690*520*780mm
640t
kangmai
Export Plywooden Case
approved CE & ISO
Handan China
8462919000
Product Description
Handanshi kangmai hydraulic equipment co.,ltd is located in the east of Wangzhuang, nearby Hanlin expressway. The main products are divided into nine series over sixty varieties, including hose crimping machine, hose cutting machine, hose skiving machine, nut crimping machine, insert pushing machine, marking machine, pressure test bench, hose cleaning machine and so on.
Well, so many suppliers, why you should choose us?
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1.Kangmai hose crimping machine CE& ISO PATENT Approved and SGS Audited.1/4
2.The fitting and hoses crimped by kangmai machine never leakage the oil and never broken.The reason like below:
(a)The machine head process by CNC machine,roundness and taper is within 0.1mm.
(b)The machine die base and dies adopt special die steel and process by advanced craft, the hardness is above 55 HRC.The die hardness is enough so that the die life is very long and easy to crimping high pressure hydraulic hose, 4SP even 6SP.
(c) The technical of machine head is forging or casting.Casting is cheap but has small hole on machine head.The piston will divide from casting machine head.
3.Strictly testing and inspetion.
(A) for raw material, we will check again by our inspector as per international standard.Only the raw material reach to international standard and allow enter kangmai facotry.
(B) for hydraulic and eletrical parts, such as valve, pump, motor and so on, we use famous brand both from China and abroad.However, we will check again when these parts enter our facotry.
(C) before the hose crimping machine enter our warehouse, the inspector check the machine roundess, taper, opening, speed, noise, apprance and so on.Only each parts is up to standard of ISO, CE standard, the machine can enter the warehouse.
(D) when the machine package, the inspector the dies, the package and other parts of clients requriment.Everything is ok, the inspector signed and machine allow to go out the facotry.
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
