Audited Supplier
NP10 FLOOR SLAB AND WALLBOARD INTEGRATED MACHINE
NP series light partition panel extrusion machine adopts the process of randomly tension-buried upper and lower protective layer rebar or pre-pulled upper
and lower protective layer rebar, with general silica cement or Portland cement as gelling agent, low carbon steel wire as reinforcing material, expanded
perlite, ceramic particles, slag, fly ash, water slag, river sand and so on as aggregate. The traditional manual drawing mold, floor mold, or vertical mold board
process requires by several processes in one body, through the machine molding. Unique processes, advanced technology, reduced product cost, improved
product quality, and production efficiency, are the core equipment for the production of light partition panels.
Auxiliary machine:
Batching machine, concrete mixer, special cutting machine, sifting machine, crusher, electric conveyor, pallet transport truck, pallet lifting truck.
EQUIPMENT PARAMETERS:| model | board specification | board making speed (m/min) | supporting power | Reamer life (km) | length x width x height (mm) | Overall weight (kg) | ||||
| Board height (mm) | Board width (mm) | Hole number (psc) | Hole diameter (mm) | Main motor | Vibrator | |||||
| NP-6*60 | 60 | 600 | 9 | 38 | >0.8~3.2 | 4 | 0.8 | >80 | 2500*860*750 | 800 |
| NP-8*60 | 80 | 600 | 8 | 40 | >0.8~3.2 | 5.5 | 0.8 | >80 | 2500*960*800 | 1020 |
| NP-9*60 | 90 | 600 | 7 | 58 | >0.8~3.2 | 5.5 | 4 | >80 | 2500*950*820 | 1100 |
| NP-10*60 | 100 | 600 | 7 | 58 | >0.8~3.2 | 5.5 | 4 | >80 | 2500*950*820 | 1104 |
| NP-11*60 | 110 | 600 | 5 | 78 | >0.8~3.2 | 5.5 | 1.1 | >80 | 2600*900*820 | 956 |
| NP-12*60 | 120 | 600 | 5 | 88 | >0.8~3.2 | 7.5 | 4 | >80 | 2460*900*900 | 1232 |
| NP-14*60 | 140 | 600 | 5 | 90 | >0.8~3.2 | 7.5 | 4 | >80 | 2480*950*900 | 1250 |
| NP-15*60 | 150 | 600 | 4 | 110 | >0.8~3.2 | 7.5 | 4 | >80 | 2460*950*880 | 1366 |
| NP-16*60 | 160 | 600 | 4 | 110 | >0.8~3.2 | 7.5 | 4 | >80 | 2500*950*900 | 1250 |
| NP-18*60 | 180 | 600 | 3 | 135 | >0.8~3.2 | 11 | 4 | >80 | 2700*975*800 | 1200 |
| NP-20*60 | 200 | 600 | 3 | 142 | >0.8~3.2 | 11 | 4 | >80 | 2700*975*800 | 1200 |
Remark: The result will vary according to the material thickness and other factors; Subject to changes in technical parameters without prior notice; The
weight and dimensions of the equipment shall be subject to the physical object.
Small concrete wall panels and floor slabs all-in-one machines have the following advantages:
1. Efficient space utilization:
Small footprint: For small construction sites, small prefabricated component plants or work areas with limited space, small all-in-one machines are small in size and do not take up too much space. They can adapt to narrow site conditions and are convenient for flexible arrangement and use in different construction environments, which helps to improve the space utilization rate of the site.
Suitable for small space operations: In some projects such as indoor renovation and small building additions, the space is relatively cramped and large equipment is difficult to use. Small all-in-one machines can produce wall panels and floor slabs in a limited space to meet the construction needs of the project.
2. Flexible and convenient production:
Flexible product size: Concrete wall panels and floor slabs of various sizes can be produced according to different architectural design requirements and space layouts. Whether it is a small partition board, decorative wall panel, or a floor slab of a specific size, it can be produced by adjusting the equipment parameters to meet personalized building needs.
Convenient transfer: Small all-in-one machines are usually relatively light in weight and easy to transport and transfer. When moving between different construction sites, there is no need for large-scale transportation equipment and complex loading and unloading processes. It can be quickly transferred to a new work site, improving the efficiency of equipment use.
Simple operation: The operation interface of the equipment is simple and easy to master. Operators can start operating after simple training. This reduces the technical requirements for operators and saves manpower training costs for small construction teams or companies with relatively weak technical strength.
3. Good cost control:
Low equipment investment cost: Compared with large concrete wall and floor production equipment, the price of small all-in-one machines is relatively low. For small enterprises, individual construction households or small projects with limited funds, the investment pressure is relatively small, and production needs can be met within an affordable cost range.
Low production energy consumption: The power of the small all-in-one machine is small, and the energy consumption in the production process is low, which can effectively reduce energy consumption costs. At the same time, due to the high production efficiency of the equipment, the production task can be completed in a shorter time, reducing the operating time of the equipment and further reducing energy consumption costs.
High raw material utilization rate: During the production process, the amount and proportion of concrete can be accurately controlled to reduce the waste of raw materials. For small projects, saving raw materials is particularly important and can reduce the overall cost of the project.
PRODUCTION SITE
FINISHED PRODUCTS DISPLAY
CONSTRUCTION SITE
