Audited Supplier
Product Description
Product introduction
Starring adopts the world-advanced equipment of cold feeding extrusion and continuous vulcanization technology. With the best performance among high polymer waterproof materials, EPDM is of exceptional elasticity and will not split or cracked under normal building movement.
Features
- Excellent weather-ability, durability and size stability
- Good adaptability to high and low temperature, UV resistant and anti-corrosion
- High tensile strength and good elongation, accommodating to structure movement
- Easy installation, solid joint, and no environmental pollution
- Good rooting penetration resistance
- Service life up to 50 years
- Roofs, Basements, Tunnels
- Industrial and civil building waterproofing
- Geosynthetic liner for fish ponds, swimming pools, channels, irrigation system.
- Especially suitable for projects with high requirement in durability, anti-corrosion and deformation
Specification
Type | EPDM Rubber Waterproof Membrane | ||
Type | Vulcanized and Weldable | ||
Thickness | 1.2mm | 1.5mm | 2.0mm |
Weight(kg/m2) | 1.54-1.58 | 1.79-1.83 | 2.25-2.29 |
Size | 1.2m (width) * 20m (length)/roll. Weldable type could be 4m wide. | ||
Packing | 24m2/rm2oll, with plastic bag. (Weldable: 80m2/roll) | ||
Usage | Roof, basement, pond, Lake, steel structure roofing, underground, tunnel, etc | ||
Technical Data Sheet
| The item name | Item | Applicable test items | |||
| (N/cm) Tension Strength (MPa) | Normal temperature≥ | 7.5 | GB6.3.2 | ||
| 60ºC≥ | 2.3 | ||||
| Elongation at break | Normal temperature≥ | 450 | |||
| -20ºC | 200 | ||||
| Tear strength N | ≥ | 25 | GB6.3.3 | ||
| (0.3Mpa.30 min)Water tightness | No seeage | GB6.3.4 | |||
| Flexibility at low temperature ≤ | -40 | GB6.3.5 | |||
| Heat expansion (mm) | Extended ≤ | 2 | GB6.3.6 | ||
| Contraction ≤ | 4 | ||||
| (80ºC×168h) Hot air ageing | Fracture tensile strength retention %≥ | 80 | GB6.3.7 | ||
| Keep rate tore elongation %≥ | 70 | ||||
| Alkaline [10%Ca(OH)2 Normal temperature×168h] | Fracture tensile strength retention %≥ | 80 | GB6.3.8 | ||
| Keep rate tore elongation %≥ | 80 | ||||
| (40ºC×168h),200×10-8 Ozone aging | - | GB6.3.9 | |||
| Artificial climate ageing | Fracture tensile strength retention %≥ | 80 | GB6.3.10 | ||
| elongation retentions after thermal oxidative aging of the blends%≥ | 70 | ||||
| Bond peel strength | Standard test condition | 1.5 | GB6.3.11 | ||
| (Normal Temperature×168h) %≥ | 70 | ||||
Product Category
Packing & Delivery
Standard packing:
1. Woven bags (color is white/blue/orange etc,shipping marks will print on bag or stick on bag)
2. PPbag,with adhesive sticker,shipping marks will print on label,and put on PP bag.(PP bag color is transparent/red/black/green etc).
3. Pallets, according to clients requirements.
4. Cow mat / very thick sheet will put on pallet directly.
Shipping: 15-25days per 20' container rubber sheet roll.
Company Profile
Anhui Sa Tuo New Material Technology Co., Ltd
Anhui Sa Tuo New Material Technology Co., Ltd., located in Xuanzhou Economic Development Zone, Xuancheng City, Anhui Province, covers an area of more than 60,000 square meters, with a registered capital of 56 million yuan. The total number of staff 350 people, senior engineer 8 people, intermediate engineer 15 people, 135 technical personnel.
Sa Tuo is a professional company engaged in rubber products, business scope mainly includes Rubber products research development, production and sales; thermal insulation materials, sealing materials production, processing and sales etc. The annual capacity of industrial rubber board 9,000 tons, silicon rubber products 35,00 tons; rock wool thermal insulation products reaches 30,000 tons, aluminum silicate products 20,000 tons, glass wool products 30,000 tons, extruded board50,000 tons, polystyrene board50,000 tons, polyurethane thermal insulation materials 20,000 tons.
Sa Tuo supplies standard products to customers all over the world. We advocates the business philosophy of "people-oriented, harmonious and innovative". Our products are in the leading position among similar products at home and abroad. We adheres to the strategic thought of safe, rational and sustainable development, and benefits the people and serves the society with high-quality products.
Workshop
Product Inspection
Certificate
Customized
1. According to customers' requirements, can be inserted with cotton, nylon, glass fiber, etc.
2. The product surface can be completely smooth and can be textured.
3. Product color can be customized according to customers' requirements.
4. The size can be customized according to customers' requirements.
5. Design rubber formula according to customers' requirements.
FAQ
Q1: Are you Factory?
A1: Yes, we have our own factory and technical team.
Q2: How many workers in your factory?
A2: We have 185 workers and 80% of them have been working for us over 5 years.
Q3: How do you make QC control?
A3: We have 10 inspectors inspect from raw material, sample, operation, semi-product to final product.
Q4: Are customized and small order available?
A4: Yes, samples or drawings are enough. Either 1pcs or 1000pcs are available.
Q5. What about the lead time?
1) 3--5 days for sample.
2) 15--20 days for mass production. If urgent,we have green channel.
Q6: How do you deal with complaint from customers?
A6: We replace order or make reimbursement if it is our responsibilities.
