Hengfu1100 Auto Cold Wall Panel and Glazed Tile Roll Forming Machine

The roller table forming part of the 1100 partial arc roll forming machine is driven by a motor, and the chain drives each roller to rotate. In the pressing part, a hydraulic cylinder drives the mold to move up and down, which can press the colored steel into many sections, shaped like glazed tiles. The cutting knife part of the 1100 type arc Glazed Roll Forming Machine is driven by a hydraulic cylinder to move up and down, which can cut off colored steel tiles.

The antique glazed tiles rolled by the 1100 type partial arc equipment and die-formed have the characteristics of beautiful appearance, simple and elegant, unique shape, taste, etc., and can be widely used in garden-style factories, tourist attractions, pavilions, hotels, villas, exhibitions Buildings and outdoor decorations such as hotels, resorts, homes, etc.

The 1100 partial arc roll forming machine is divided into three parts, the roller forming part, the pressing part and the cutter part.

The production process of the 1100 type partial arc equipment is as follows: the colored steel plate enters the roller forming part, and then goes to the pressing part after forming, where it is pressed into equidistant sections, and the cutter is responsible for cutting to a fixed length.

The products produced by the 1100 partial arc roll forming machine have the characteristics of light weight, heavy load bearing and excellent performance. The 1100 partial arc roll forming machine is widely used in the multi-high-rise steel structure construction industry.

Pattern diagram:

Before using the 1100 partial arc roll forming machine, check whether all connections are secure and whether the mounting bolts and nuts are tightened. Enough lubricating oil should be added to the left and right chassis before the machine can be powered on and started for test run. First, run the machine empty and observe carefully to see if there is any vibration. , noise, whether there is oil coming from the oil window, whether the movement of each component is coordinated, and the mold can be installed only after the diversity is normal. When installing the mold, you need to cut off the power supply, move the motor belt or large gear manually, index the workbench, and make the slide seat When it rises to a high point, it is best to use an object to support it between the workbench and the bottom of the sliding seat, so that the sliding seat will naturally fall, causing an accident.

The mold used in this machine requires an upper mold and six lower molds of the same size. Install the upper mold and a lower mold first. The lower mold is directly installed on the hexagonal runner worktable, and the upper mold is installed on the bottom of the slide. Place a backing plate of appropriate thickness to protect the upper and lower molds. After the molds are closed, the surrounding gaps will be even and the distance between the upper and lower molds will be equal to the required thickness of the tile blank. Then take the upper mold as the standard, turn the workbench, and install the remaining five sets of lower molds. Only after the upper and lower molds are installed can the car be driven for tile pressing.

1. Framework: 350H steel frame

2. Number of rolling mill units: 16 rows for forming

3. Roll material:45 # steel rough lathe fine lathe outer circle grinding and electroplating treatment

4. Spindle diameter: Φ 70mm

5. Feeding method: Double hand rocking feeding rack

6. Cutting: Cut after molding, hydraulic double linear guide rail follows the cutting pattern

Hebei Hengfu Roll Forming Machine Co., Ltd. is a professional manufacturer of cold-bending forming equipment and its complete set of automated production lines. With advanced production equipment and product development and design capabilities, the products are at the leading level in the industry with the advantages of high rate, high precision, high flexibility, and low processing loss, and the products are favored by industry customers.

  Our company's main products include: color steel plate equipment, glazed tile equipment, floor decking equipment, CIZ steel forming equipment, composite sandwich panel assembly line equipment, car compartment panels, dust removal anode plates and other equipment. We can design and manufacture special models according to user requirements, provide users with technical guidance, production installation, commissioning, and after-sales one-stop service.

   In recent years, a large number of products have been sold to more than 50 countries and regions including Russia, India, the United Kingdom, Australia, Kazakhstan, etc., and have been well received by customers at home and abroad.


Certifications:

Company:

Workshop:

Customer & EXPO:

Transaction transportation:

Q1: Are you a trading company or a factory?
A1: We are a manufacturer located in Cangzhou, Hebei. We have our own Having their own product design team. Welcome to visit our factory and inspect the quality of our machines on-site
Q2. Do you have after-sales support?
A2: Yes, we are happy to provide advice and we also have skilled technicians available across the world.
Q3. Do you sell only standard machines?
A3: No, most of our machines are built according to customers specifications, using top brand components.
Q4. What will you do if the machine is broken?
A4: We provide 12 months free warranty and free technical support for the whole life of any machine.If the broken parts can't repair, we can send the new parts replace the broken parts freely, but you need pay the express cost by yourself. If it is beyond the warranty period, we can negotiate to solve the problem, and we supply the technical support for the whole life of the equipment.
Q5: Can you finish the machine during the delivery time?
A5: We will finish the machine in time according to determined lead time.