Audited Supplier
Manual type tire/plastic pyrolysis machine with 15tons/batch characteristic :
1: This pyrolysis machine is intermittent production, and the front end of the reactor opens a circular charging door. The hydraulic feeder and conveyor belt are used for feeding, and the feeding time of 15 tons of raw materials is just 1.5 hours.
2: This set of reactor use 1200 degrees of high temperature insulation material insulation, so that the main kettle insulation effect is good, fuel saving, the main kettle shell.Integrated design, convenient assembly, effective protection of thermal radiation to people and objects caused by thermal damage. . The service life of the reactor can reach 5-6 years .
3: This machine adopts the automatic pre-slagging method to produce carbon black, carbon black is transported to the carbon black silo through the screa auger, the sealing effect is good, no pollution. 15 tons of raw materials can produce carbon black 5.2 tons, carbon black discharge time 1 hour.
4: The oil gas cooling system of this machinet adopt the vertical condenser cooling method, which can fully cool the oil gas effect and improve the oil yield.
5: Oil tank installation is equipped oil level indicator and pump to big oil tank automatically.
6: The oil gas separator can reduces the system pressure, and the emergency exhaust valve is configured above the drum to further prevent the danger of sudden increase in system pressure.
7: water seal can make prevenent the non-condensible waste gas com back to the oil tank , ensure go to the reactor gas burners to burn efficiently ,it also guarantee the safety of the oil circuit part of the channel.
8: The excess part of the exhaust gas combustion chamber, the main role is to deal with the excess part of the furnace combustion, after the combustion of the flue gas through desulfurization and denitrification equipment for treatment, to ensure pollution-free emissions, to meet the national soot emission standards.
9: Energy consumption: water consumption 0.5T/day circulating water. Power : 20KW/hour
10 Heating method: This machine uses natural gas, pyrolysis oil and waste gas, waste water combined for combustion heating of the reactor.
End product percentage and usage .
| Raw material | End product | |||
| waste rubber/tyre | Fuel oil 40%-45% | carbob coke 30%-40% | 10%-15% steel | 10%-15%gas |
| waste plastic | Fuel oil 20%-80% | carbon coke40%-50% | 10%-15% steel | 10%-15%gas |
| Fuel oil : can be sold to ceramic factory ,glass factory,brick factory to burn as energy. It can also use the oil distillation machine to extract the diesel and gasoline. | ||||
Our solutions:
Tire plant solution
Tube plant solution
Conveyor belt plant solution
Rubber mat plant solution
Waste tire recycling plant solution
Reclaimed rubber plant solution
Rubber product plant solution
Our products:
Tire making machines:
Rubber anbury mixer, internal mixer, dispersion kneader, two roll mill, TSR, batch off machine, extruder, calender, building machine, curing press machine.
Conveyor belt making machines:
Vulcanizing press.
Rubber mat making machines
Inner tube making machines
Global headquarter: Qingdao, China
Branches: Thailand, Sri Lanka.
Service
Plant engineering - We provide FREE layout design for new plant.
Supplier Integrity - 24/7 working machines, extremely reliable.
Plant Installation Support - Installation&commissioning service.
Spare Parts - Long lasting parts are manufactured by us, always available.
Maintenance/Optimization - Overseas engineers available.
Training - We provide FREE training for new plant.
Raw Materials - Raw material support exported from China.
1. Q: How to guarantee the quality of outsourcing parts?
A: First choice more than 2 suppler by tender, There are strict system and process for inspecting outsourcing parts. And there are outsourcing inspectors, after inspection, qualified goods, labeling and storage. Not qualified, return.
2. Q: Which brand of electric part?
A: Use world famous brands, Siemens, Omron, Toshiba, ABB
Customer can specify the brand.
3. Q: Which PLC:
A: Siemens, Omron, Mitsubishi
4. Q: How to control the quality?
A: There are inspectors for inspecting equipment quality and performance, after a ssembly, machine run continuously for at least 12 hours at one time, Total running time should be not less than 48 hours.
About installation
1. Q: When the guide engineer arrive at customer's factory?
A: If need installation on site, engineer will arrive at factory within one week after machine arrived at factory.
About after-sales service
1. Q: What is the warranty time?
A: 2 years after machine arrived at factory
2. Q: How to solve the problem?
A: Within one hour after getting customer' problem, inform the solution way, there are three ways for different conditions. 1, Which can be solved by phone or Email, it will be solved in two hours. 2. Which can be solved by Remote Control, it will be solved within four hours(machine is equipped by Remote Network Control Problem). 3. Which need solve it on site, engineer arrive at factory within one week(in the two years warranty date, engineer has the visa any time of the country where the machine.
Foreign Customers Visit Factory:
Will Gao
Sales manager
Qingdao Maoyuanfeng Industry & Trade Co.,Ltd
A:Shijidadao Road, Huangdao District, Qingdao, Shandong, China
