Audited Supplier
Solution for PCBA SMT and Tht Line Production Line
1.Wave soldering machine infeed conveyor
1. It is used to feed PCB's or pallets into wave soldering machine at 6-7°.
2. Conveyor width and angle can be adjusted by hand crank.
3. Special belt and track, transmission smooth, and work stable and reliable.
Specification:
| Model | Jaguar-350 |
| Demensions(L×W×H) | 1000*700*750(mm) |
| PCB width | 0-350(mm) |
| PCB direction | L-R |
| Conveyor speed | 0-2000(mm)/Min |
| Motor | 1P AC220V 50/60HZ 15W |
| Power supply | 1P AC220V 50/60HZ |
| Conveyor Height | 750±20mm |
| Belt Material | ESD Belt |
| Conveyor length | 1000(mm) |
| Weight | Approx.45Kg |
2.wave soldering machine
Computer controlled lead-free hot air double wave soldering machine N450
Product Description:
1. Detailed description
·The whole machine is controlled by Siemens PLC + Yanjing industrial control + temperature control module, which is stable and reliable
·Powerful control software, running on Windows 10 system, Chinese and English can be switched at any time
·Full computer control. Computer, PLC and controller form a stable system
·The total length of the four-stage preheating zone is 2000mm, with upper and lower hot air preheating
·Modular design of heater, easy maintenance
·Molded curved tooth impeller, patented nozzle design, achieving ultra-low oxidation amount
·The inner tank of the tin furnace is made of stainless steel, which effectively prevents corrosion of lead-free solder.
·Sibo economical operation mode, less oxidation, energy saving
·Fully titanium alloy chain claws, corrosion-resistant and high-temperature resistant, never deformed
·The shock wave peak and sharp flat wave width are adjustable, saving energy and reducing the amount of oxidation
·Double cooling zone design, using upper and lower fans for forced cooling
·Equipped with Jaguar-specific titanium alloy double hooks and aluminum alloy guide rail anti-deformation structure design
·Manual adjustment of substrate width; adjustable conveying angle
·Transportation speed is controlled by frequency converter, stepless speed regulation
2. Technical parameters of the whole machine:
·Control mode: computer + Siemens PLC
·Transportation motor: 1P AC220V, 250W
·Transportation speed: 300-2200mm/min
·Substrate size: 50-450mm(W)
·Inlet height:750±20 mm
·Air source: 5kg/cm² 12Nl/min
·Preheating area: 2000mm (500 x4 each section has independent temperature control), room temperature ~250ºC
·Tin furnace heating: 1.5KW*9PCS room temperature ~300ºC
·Crest height: Approx.12mm
·Solder furnace capacity: 380KG (lead-free)
·Tin furnace temperature: room temperature ~ 300ºC (adjustable)
·Crest motor: 3P AC220V, 0.18KW*2PCS
·Transportation direction: L→R (R→L optional)
·Power supply: AC380V 50HZ/60HZ
·Normal operating power/total power: 10KW/35KW
·Body size: 4000(L) ×1550(W) ×1705(H) mm
·Net weight: 1500KG
Flux sprayer JAGUAR-450B
Product Description:
1. Detailed description
·The whole machine adopts Siemens PLC + touch screen control, which is stable and reliable
·Powerful control software, Chinese and English can be switched at any time
·The spray movement is controlled by stepper motor + driver, the spray is accurately positioned, stable and reliable
·Japanese paint nozzle, adjustable spray area and atomization depth
·The flux automatic supply system adopts Japanese SMC with dynamic pump and automatic supply to maintain constant pressure of flux.
·Complete flux recovery and exhaust filtration system, beneficial to the environment
·Modular design of all components for easy maintenance
·Customized rails, hardened, wear-resistant, never deformed
·Chain cleaning, automatic cleaning, upper and lower brushes for deep cleaning
·Manual adjustment of substrate width; adjustable conveying angle
·Transportation speed is controlled by frequency converter, stepless speed regulation
·The precision width-adjusting screw rod is stable and reliable. The width-adjusting system is outside the casing, which is convenient for cleaning and maintenance and will not stick to flux.
·The flux discharge part has an anti-drip structure to keep the upper part of the circuit board clean.
2. Technical parameters of the whole machine
·Control mode: touch screen + PLC
·Transport motor: 60W
·Transportation speed: 300-2200mm/min
·Substrate size: 50-450mm(W)
·Flux capacity: 5L
·Paw washing pump: 6W
·Transportation direction: L→R
·Welding angle: 3-6°
·Flux pressure: 0.3-0.5Mpar
·Power supply: AC220V 50HZ/60HZ
·Normal operating power/total power: 1.2KW
·Body size (including claws): 1500*1150*1555mm
·Net weight: 200KG
3.Wave soldering outfeed conveyor
1.It is used to unload PCB's or pallets from wave soldering machine at 6-7°.
2.Transmission speed, transfer height and track angle can be adjusted.
3.Cooling fan can be installed so that it can protect the PCBs or the component.
4.Special belt and track, transmission smooth, and work stable and reliable.
Specification:
| Model | Jaguar-400 |
| Demensions(L×W×H) | 1200*490*1200(mm) |
| PCB width | 0-400(mm) |
| PCB direction | L-R |
| Conveyor speed | 0-4000(mm)/Min |
| Motor | 1P AC220V 50/60HZ 15W |
| Power supply | 1P AC220V 50/60HZ |
| Conveyor Height | 750-1200mm(adjustable) |
| Belt Material | ESD Belt |
| Conveyor length | 400±800(mm) |
| Weight | Approx.48Kg |
Automatic 2.4 Meter DIP insertion line
this dip line/dip assembly line is to insert the components on PCB or assembly CFL .
1.Working place arranged at one side beside the conveyor.
2.Motor running ,Chain moving .
3.Our normal length is 2.4M ,one working place per 1 meter,totally 3 working places
4.Line width is about 600mm ,total height about 1800mm ,working height 740mm.
5.Materials :aluminum .
6.Suitable PCB width 35-300mm width can adjustable.
7.fix 40 W fluorescent tube per working place ,totally 3 tubes.
8.each working place install component box fixtures /boards .
9.Moving method ; Driven by motor ,PLC control ,speed 0.3-3m/min adjustable.
10. Total Power : 60W AC220V/1phase/50HZ60w
11.By connected the line to wave soldering machine with conveyer , it will automatically go to the next step for soldering .
12.Speed: 0.2-2m/min
13.Dimension:240x60x180CM
14.Weight:Approx.80Kg
Automatic Insert Line Features:1. this machine is used for the PCB board plug-in components for the assembly, it is used in front of wave soldering machine;
2. we can add tracheal tube, gas tube and other equipments;
3. this machine is made of aluminum which sized in 40*40mm.
4. the chain conveyor is smooth and reliable.
5. we can handle the speed by stepless frequency.
Shenzhen Jaguar Automation Equipment Co., Ltd. is a professional Reflow Oven and Wave Soldering Manufacturer in Shenzhen, China. We focus on SMT and THT Soldering technology for more than 10 years, and our engineers have more than 20 years experience.
We are certified National High-tech Enterprise since 2017, integrated R&D, manufacture, service, trade, all our products have CE certification, our products are widely recognized at our domestic market as well as oversea market.
Our goal is to provide customers with the best service possible and to produce excellent quality products that will meet or exceed your expectations.
More than 6000 square meters production plant.
More than 20 years experience in SMT automation equipment manufacturing. More than 50 peoples production team, among them
36 mechanical assembly technicians
12 electrical engineers
4 professional QC
Successful Experience:
JAGUAR's customer in 35 countries around the world
1. We have been helping customers to build a lot of new factories around the world.
2. Training more than 600 experts and technician for customers.
3. Became the most reliable Chinese partner for you.
Customer and Feedback:
Exhibitions:
Keep attending more than 10 exhibitions and forums each year.
The annual NEPCON and Electronica exhibitions are our regular event.
Participate in 3-5 overseas famous exhibitions regularly every year, like:
IPC Expo in San Diego, US
Electronica in Delhi, India
Electron Tech Expo in Mosco, Russia
WIN Exhibition in Istanbul, Turkey
Our Certificates:We passed ISO certifications
We are IPC member company
We are National High-tech Enterprise
All the machines have CE and ROHS certifications
Packing and shipping:
1. We provide full SMT and THT solution for you
2. We provide core technology with our equipments
3. We provide the most professional tech service
4. We have wealthy experience on SMT and THT factory setup
5. We can solve any question about SMT and THT
Shenzhen Jaguar Automation Equipment Co., Ltd
ADD:14th Building,West of Furong Industrial park,Shajing town,Bao.anDistrict,Shenzhen,Guangdong,China
