Audited Supplier
FBYS268
Double-End
Low Mechanical Seal
General Speed Mechanical Seal
High Temperature Mechanical Seal
Temperature
Standard, Nonstandard
1 Tons
1500mm,4500mm,Customized
1500mm,Customized
0.3 to 3.0mm
Aramid Fiber, Carbon Fiber, Fiberglass
Machinery, Petrochemicals, Automobiles, Motorcycle
Provide Free Sample in A4 Pieces
CNM
Pallet and Waterproof Paper
China
6811820000
Product Description
Product Description
Aramid fiber, carbon fiber, fiberglass, etc. as a skeleton material, oil-resistant adhesive special cooperation, add the corresponding chemical additives, fillers, the use of roller pressure legal system.| No. | Features |
| 1 | The maximum operating temperature is 300 degreesCand the maximum operatingpressure is 3.0MPa |
| 2 | Good temperature, pressure resistance and durability |
| 3 | Surface treatments such as anti-stick can be carried out |
| 4 | The EU ROHS certification and asbestos-free confirmation have been made |
| 5 | Can be made wire mesh, plate-enhanced asbestos-free sealing plate |
Application
Mainly used in machinery, petrochemicals, automobiles, motorcycles and other conditions for sealing padding materials, especially suitable for automobiles, motorcycle engines with gaskets. Suitable for a variety of oil, air, water, steam and other media.
Specification
Wide × (mm):1500×4500, 1500×1500
Thickness(mm):0.3 to 3.0
Special specifications can be agreed with the customer
Physical performance
The item | Refers to the target | |
| Lateral stretch strength Mpa | ≥10 . | |
| Density g/cm3 | 1.8±0.15 . | |
| Burn loss (550 degreesC×1h). % | ≤40 . | |
| Creep relaxation rate (100degrees C×22h). % | ≤30 . | |
| Compression rate % | 10±5 . | |
| Bounce rate % | ≥45 . | |
IRM903 . . . standard oil 150°C×5h . | The rate of thickness change % | ≤15 . |
| Weight change rate % | ≤15 . | |
| Horizontal stretch strength MPa | ≥7.0 . | |
ASTM Fuel B The temperature ×5h | The rate of thickness change % | ≤15 . |
| Weight change rate % | ≤15 . | |
Water: glycol s1:1 100°C×5h . | The rate of thickness change % | ≤15 . |
| Weight change rate % | ≤15 . | |
| Compression rate % | 15±5 . | |
| Bounce rate % | ≥35 . | |
Nitrogen leakage rate (Q/YSM BJS001-2009) ml/min | ≤1.0 . | |
| The maximum temperature and maximum pressure cannot be used at the same time. These are general guidelines and should not be used as the only way to select or exclude the material |
Company Introduction
JINAN SUNRISE NEW MATERIAL TECHNOLOGY CO.,LTD
| Our company is making full use of existing resources Under the premise, take the road of professional development. The various types of rubber parts, fiber sealing sheets, rubber-coated sheets and other products developed and produced by the company are widely used in various commercial vehicles, passenger cars, ships, general machinery, petrochemical, thermal power stations and other needs Sealed field. It is one of the domestic companies specializing in the production of sealing products. It has the ability to develop simultaneously with domestic and foreign OEMs. At present, the company's design technology, manufacturing technology, and test technology continue to improve, and its products are continuously upgraded and expanded. It has built an industry-leading sealed laboratory, and has always maintained the ability to develop simultaneously with the main engine factory. The company has deepened the development strategy of the concept of "innovation" and "environmental protection", adhered to green environmental protection and occupational hygiene, and realized non-asbestos and metallization of its products. |
Package and shipment
Q:Can I get smaple?
A:Sure. We usually provide existing sample Sample charge is refundable when order is up to certain quantity.Usually the freight fee is born by the buyer.
Q:What's the delivery time?
A:20~30 days after T/T prepayment.
Q:Why the delivery status shall be in master ciol?
A:To save cost for you and in order that you can get much better price, we suggest to deliver the goods in master coil instead of slitted kind as the export tax refund is different for master coil with width above 600mm and slitted kind.If you have no sltting capacity,we will supply the sltted kind for you.
Q:Why choose us?
A:We have advanced equipment and rigorous quality inspection process, and can provide test reports and quality certificates.
