Competiitve Price Mbr Module in The Waste Water Industry Treatment

Price $15.00 Compare
Min Order 1500 Square Meters
Shipping From Zhejiang, China
Popularity 256 people viewed
Quantity
+-
 

Ningbo Shuiyi Membrane Technology Development Co., Ltd.

VIP   Audited Supplier 4 years
Profile Certified by SGS/BV
SMU-30A
Hollow
UF
30 Sqm
0.03 Um
Outside to Insde
16 Kgs
PVDF Hollow Fiber
SHUIYI or Customized
Standard Export Woonden Cases
1250*2000*34
Made in China
8421999090
Product Description
About SHUIYI

After years of honed in the competition, SHUIYI has become one of the few manufacturers in the industry with a full range of membrane technologies and products including microfiltration (MF), ultrafiltration (UF), nanofiltration (NF), and reverse osmosis (RO).
Our membrane products are widely used in the application fields of municipal sewage reclamation, industrial wastewater zero discharge, reclaimed water reuse, pure water preparation, highly polluting wastewater treatment, river restoration, decentralized rural sewage treatment, process concentration, and separation, etc., with rich application experience and engineering project cases.

Introduction

SHUIYI UltrafilTM series of immersed ultrafiltration elements adopt a new formula, the support layer and the membrane separate layer are perfectly matched to form a high flux, high strength hollow fiber through a special composite production process. The sheet-type membrane elements immerse in the membrane tank with high system integration and reliable water production quality. SHUIYI immersed ultrafiltration membranes are widely used in municipal tap water, reclaim water reuse, which can remove suspended solids and microorganisms in raw water.

Features
  1. Lower energy consumption and higher efficiency;
  2. Higher mechanical strength, slower flux decline, longer service life;
  3. Standardized modularization design for easy installment and replacement;
  4. Stable and reliable water production;
  5. Slower contamination speed, longer clean cycle.
Specifications
Membrane SpecificationsModelUS-35EUS-35A
MaterialSupport layer: PET
Separate layer: PVDF
Active Membrane Area 35 m2
Nominal Pore Size0.03 μm
Hollow Fiber Inner/Outer Diameter2.05/2.6 mm
Filter TypeReinforced outside-in membrane
Membrane Module SpecificationsModel Dimensions1250×2000×30 mm824×2400×46 mm
Outlet Connection SizeФ24DN32
MaterialEnd ABS
Sealing MaterialEpoxy resin/Polyurethane
Center PoleSUS304/
WeightMembrane Weight (Dry)16 kg14 kg
Membrane Weight (Wet)32 kg30 kg
Operation ConditionsTemperature5~40ºC
pH2-10
Operating Flux (LMH)30-45
Backwash Flux (LMH)55-70
Recommended Transmembrane Pressure (TMP)0-35 kPa
Maximum Backwash Pressure70 kPa
Aeration Intensity60-120 Nm3/h·m2 shadow area
Chemical Cleaning pH Range 1-11
Quality of Permeate WaterTurbidity≤ 0.2 NTU
SDI15≤ 3.0
P.S The design flux and backwash flux depends on the operation and maintenance of the entire system

Applications
  1. Municipal tap water
  2. Municipal reclaimed water
  3. Municipal wastewater
  4. Reclaimed water reuse
  5. Basin governance



Message Type
* Message Content
* Name  
* Phone
* Email
* CAPTCHA