Audited Supplier
Products Introduction of Plastic Pentagon Ring
Plastic pentagon packing is an excellent packing. Based on this product's structure analysis, funnelled hollow out design speeds up liquid's velocity so as to improve Gas & liquid separation efficiency. Ring wall's large area opening hole overcomes big area blocking. Five pieces of horizontal bar which bend toward the centers forms more bigger surface for gas & liquid's contacting. More obviously feature is five pieces of down warded rods evenly distribution. This distribution will promote liquid drop to form big droplet. Finally, it is recognized high efficiency random packing used in separation.
Product Parameters
Technical Specification of Plastic Pentagon Ring
Product name | Plastic pentagon ring | |||||
Material | PP, PE, PVC, CPVC, PVDF, etc | |||||
Life span | >3 years | |||||
Size | Surface area m2/m3 | Void volume % | Packing number pieces/ m3 | Packing density Kg/m3 | Dry packing factor m-1 | |
Inch | mm | |||||
1-1/2" | 38*12*1.2 | 246 | 95 | 46000 | 112 | 260.3 |
2" | 50*17*1.5 | 218 | 97 | 21500 | 107 | 225.2 |
3" | 76*26*2.5 | 198 | 96 | 6500 | 92 | 207.1 |
Feature | High void ratio, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high efficiency of mass transfer. | |||||
Advantage | 1. Their special structure make it has big flux, low pressure drop, good anti-impaction capability. | |||||
Application | These various plastic tower packing are widely used in petroleum and chemical, alkali chloride, gas and environmental protection industries with max. temperature of 280°. | |||||
Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), polyvinyiidene fluoride (PVDF) and Polytetrafluoroethylene (PTFE). The temperature in media ranges from 60 Degree C to 280 Degree C.
Performace/Material | PE | PP | RPP | PVC | CPVC | PVDF |
Density(g/cm3)(after injection molding) | 0.98 | 0.96 | 1.2 | 1.7 | 1.8 | 1.8 |
Operation temp.(ºC) | 90 | >100 | >120 | >60 | >90 | >150 |
Chemical corrosion resistance | GOOD | GOOD | GOOD | GOOD | GOOD | GOOD |
Compression strength(Mpa) | >6.0 | >6.0 | >6.0 | >6.0 | >6.0 | >6.0 |
Our Factory assure all tower packing made from 100% Virgin Material.
Packaging & Shipping
1. OCEAN SHIPPING for large volume.
2. AIR or EXPRESS TRANSPORT for sample request.
Packaging & ShippingPackage type | Container load capacity | ||
20 GP | 40 GP | 40 HQ | |
Ton bag | 20-24 m3 | 40 m3 | 48 m3 |
Plastic bag | 25 m3 | 54 m3 | 65 m3 |
Paper box | 20 m3 | 40 m3 | 40 m3 |
Delivery time | Within 7 working days | 10 working days | 12 working days |
