Audited Supplier
p3.1130-01
Stainless Steel
Industry, Textile, Metallurgy
Hydraulic Filter
10um
Compact
1
3
5
10
fangte
Carton
stainless steel
China
8421999000
Product Description
The HEBOKE sdfc Zhonglian pump truck chassis suction filter is composed of polypropylene long fibers, which have high molecular delay dehydration ability. Fine particles smaller than 2 microns can be filtered (one filter can filter 780 milliliters of water and 2500 grams of impurities). Hydraulic oil can still be used for a long time! In fact, fundamentally solving the problem of hydraulic system cleanliness cannot be solved by simply changing the oil, because even if the oil in the hydraulic system oil tank is drained, more than 30% of the old oil still exists in the hydraulic system. When new oil is injected, it will inevitably be contaminated by residual old oil in the system, greatly reducing the cleanliness of the hydraulic oil. Therefore, changing the oil cannot solve the problem of improving cleanliness. Only by circulating and filtering during hydraulic system operation can the cleanliness of the hydraulic oil be fundamentally improved.According to the report, pollution is the main cause of hydraulic system and mechanical failures, so the system must be kept clean to ensure its effectiveness. If the hydraulic system undergoes ultrafine filtration, its components can extend its lifespan by more than 50 times. The practical results show that increasing the filtration accuracy from 40 microns to 30 microns can reduce mechanical and hydraulic system wear by 50%. If the filtration accuracy is increased by another 15 microns, the wear can be reduced by 75%. This study also suggests that reducing friction can lower fuel consumption by 5%. The long-term practice results of Oil Monitoring Co., Ltd. show that 70% -80% of hydraulic system failures are caused by oil pollution. Improving the cleanliness of hydraulic oil by one level will extend the service life of the main components of the hydraulic system by ten times. Therefore, regular filtering and testing of hydraulic oil can extend the service life and reduce mechanical failures.
HEBOKE ultrafine filters will not filter out additives because most additives are only 0.064 microns and dissolve in oil in a liquid state, so they will not be filtered out. Suitable for hydraulic systems in construction machinery, machine tools, injection molding machines, power plants, paper mills, metallurgy, rolling, steel plants, and various other machinery!
HEBOKE ultrafine filtration device:
1. Extend the oil change time,
2. Reduce the amount of waste oil,
3. Reduce wear and tear,
4. Avoid mechanical failures,
5. Reduce downtime,
6. Clean the entire hydraulic system of the machine,
7. Reduce labor costs,
8. Reduce maintenance costs (the annual hydraulic system maintenance cost for each hydraulic machine will not be less than 70%).
At present, the global oil price continues to rise, and it is difficult for dealers to raise the price of oil when selling it. Therefore, it is difficult to buy oil, and poor oil has a huge impact on machines. Moreover, the hydraulic system maintenance cost of each hydraulic machine every year is not less than 70%. Machines are like humans, cherishing machines depends on humans. Only with healthy machines can you bring greater rewards
Before filtering, after 2000 hours of operation, the hydraulic oil sample is magnified 100 times and photographed again, and impurities with wear properties can be clearly seen.
After filtering, the hydraulic oil is magnified 100 times and photographed, showing that all impurities have been filtered.Chemical filters: activated carbon filter
1. Description air filter :
Chemical filters can remove chemical pollutants in the air, such as: odor, ammonia, sulfur dioxide, VOCS (volatile organic compounds), etc., to meet the requirements of industrial environment, environmental protection and civil.
2. Adsorption capacity:
For a certain gas, the maximum amount of activated carbon can be adsorbed per unit mass is called "adsorption capacity". Different activated carbon materials or adsorption of different gases, adsorption capacity is different. In order to determine the adsorption capacity of the filter, we should understand: pollutant type, pollutant concentration, air flow temperature, relative humidity.
3. Filter Rate:
The filtration rate refers to the airflow speed through the surface of the adsorbed material. Under the condition of specific filter structure, the filter speed is low, the contact time between gas and activated carbon is long, and the adsorption efficiency is high. When the user uses the activated carbon filter, the filter speed (that is, the filter air volume) should be reasonably selected.
4. Service life:
In use, the adsorption efficiency of activated carbon is continuously reduced, and when the concentration of harmful gases downstream of the filter reaches the maximum allowable value, the filter needs to be replaced. The service life of activated carbon filter is related to many factors, such as pollutant concentration, temperature, humidity, filter air volume, and activated carbon. In the case of other factors, the amount of activated carbon determines the service life of the filter.
5. Filter replacement:
Monitoring the pollutant concentration changes before and after the filter can determine whether the filter should be replaced. But at present, there is no simple and practical monitoring means in China. Therefore, the user should determine the service life of the activated carbon filter according to the specified cycle or by experience.
6. Why choose us?
a. Advanced manufacturing capabilities and technology;
b. Lean production management;
c. Top quality products with high cost performance;
d. Strict inspection by professional QC before delivery;
e. Fast and efficient transportation
f. Your faithful and long-term partner.
7. Company introduction
Gu′an County Fangte Filter Equipment Co., Ltd.is founded in 2018. The company specializes in R&D production and sales of various filters, filter elements, filter discs, filter devices, hydraulic components and so on. All the products are close to the practical application of customers. Reasonable design, strict control of raw materials, excellent manufacturing, are the ideal product selection of various related industries. The company always uphold the spirit of craftsmanship to create each product. Adhere to the concept of "no best, only better" and do a good job in every process.
8. Quality CraftsmanshipWe believe there's nothing more important than getting it right the first time! That's why our team of engineering experts does whatever it takes to produce the best products to match your application. Our products are precision built to match your machine and performance. Each product is quality inspected for dimensional accuracy, straightness, and surface finishing.
9. Our Service
| Pre-sales Consultation | 24-hour Hotline | After-sales Services |
| Whether you have any question can be solved through online communication. Welcome your consultation. | No matter when and where to call we can find our service to you. | Having any questions about the products, please contact with us and we will help you deal with them the first time to your satisfaction. |
10. Q&A:
a). Q: Are you trading company or manufacturer ?
A: We are a factory.
b). Q: What's the terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balancing.
c). Q: What are your terms of delivery?
A: EXW/FOB/CIF. Customer indicated forwarders or our own agents.
d). Q: How about your production lead time?
A: Generally, within MOQ quantity it takes 5-7 working days after receiving your advanced payment. The specific delivery time depends on models and the quantity of your order.
e). Q: What's your sample policy?
A: We do not offer free samples. If you really need, we can discuss it.
11. Delivery
Delivered to you safely and on time!
