MadeInChina.com > Electrical & Electronics > Electrical Control System

48V 60V Brushless Motor 650W with RS485 DC Brushless Controller for Water Pump

Price	$127.00 Compare
Min Order	1 Piece
Shipping From	Shandong, China
Popularity	396 people viewed
Quantity	+-

Jinan Lanjiu Electronic Technology Co., Ltd.

Audited Supplier 5 years

Profile Certified by SGS/BV

Shandong, China
Lydia (Ms.)

Visit Homepage Product Catalog

Product Detail

Model NO.:

LK86BL11560+LKDBLS-750-30L4

Task:

Following

Signal:

Continuous

Function:

Automatic Control, Protection, Monitoring, Measurement

Certification:

CE

Condition:

New

Customized:

Non-Customized

Material:

Aluminum Alloy

Product Name:

48V 60V Brushless Motor 650W with RS485 DC Brushle

Input Voltage:

24VDC~48VDC(10~60VDC)

Alarm Function:

Over-Voltage, Under-Voltage, Over-Current, Over-Te

Maximum Current:

30A

Adaptive Motor:

Suitable for Brushless Motors Within 750W

Trademark:

Lulanjiu

Transport Package:

Carton

Specification:

0.6kg

Origin:

China

Product Description

Brushless DC motors (BLDC) have been a much focused area for numerous motor manufacturers as these motors are increasingly the preferred choice in many applications, especially in the field of motor control technology. BLDC motors are superior to brushed DC motors in many ways, such as ability to operate at high speeds, high efficiency, and better heat dissipation.
They are an indispensable part of modern drive technology, most commonly employed for actuating drives, machine tools, electric propulsion, robotics, computer peripherals and also for electrical power generation. With the development of sensorless technology
besides digital control, these motors become so effective in terms of total system cost, size and reliability. It has no mechanical commutator and associated problems.

This control drive is a closed-loop speed type controller, adopting MOS power device, using the Hall signal of the DC brushless motor to multiply the frequency for closed-loop speed control, and the control link is equipped with a PID speed regulator, the system control is stable and reliable, especially in the low-speed always reach the maximum torque, the speed control range of 150~10000rpm.

Features:

2.1 PID speed and current double loop regulator
2.2 High performance and low price 2.220KHZ chopping frequency
2.3 Electrical brake function, make the motor respond quickly
2.4 Overload multiplier is more than 2, the torque always reaches the maximum at low speeds
2.5 Over-voltage, under-voltage, over-current, over-temperature, blocking, peak current, Hall signal illegal and other fault alarm functions.
2.6 Hall and no Hall compatible, no Hall sensing mode is only applicable to special occasions (start load is relatively constant, start is not very frequent, such as fans, pumps, polishing and other equipment,)
2.7 Operating temperature 0~+45°C
2.8 Storage temperature -20~+85°C
2.9 Use and storage humidity <85% [no frost conditions] Temperature alarm occurs after the temperature of the drive heat sink reaches 85±5°C, and automatically returns to normal after the temperature drops to 79±5°C

Electrical indicators:

1-Standard input voltage: 24VDC~48VDC (10~60VDC)
2-Voltage lower than 10±1VDC drive undervoltage alarm
3-Voltage higher than 60±2VDC drive over-voltage alarm
4-Maximum current of continuous output protection: 30A (3S), suitable for brushless motors within 750W.

Automatic Guided Vehicle, Intelligent robot, crawler vehicle, fire fighting robot, exploder clearing robot, shopping guide robot, medical robot, rescue robot, routing inspection robot, theme park robot,Tracked vehicle.Special motor for high speed BLDC Motor winder,Sweeper machine,precision Automation machine,Agricultural and industrial equipment.

Jinan lanjiu Electronic Technology Co., Ltd. mainly engaged in high and low voltage permanent magnet DC motor, high and low voltage BLDC Motor, high and low voltage DC servo motor, and its supporting high and low voltage DC motor drivers, DC servo motor drivers and other high-quality products for industrial fields.

Q:What's the lead time for regular order?

A: For orders, the standard lead time is 3-5 days and this time can be shorter or longer based on different model, period and quantity.

Q: Can you send me a price list?

A: For all of our motors, they are customized based on different requirements like lifetime, noise, voltage, and shaft etc. The price also varies according to annual quantity. So it's really difficult for us to provide a price list. If you can share your detailed requirements and annual quantity, we'll see what offer we can provide.

Q: Is it possible for you to develop new motors if we can provide tooling cost?

A:Yes. Please kindly share the detailed requirements like performance, size, annual quantity, target price etc. Then we'll make our evaluation to see if we can arrange or not.

Q: Can I get some samples?

A: It depends. If only a few samples for personal use or replacement, I am afraid it'll be difficult for us to provide because all of our motors are custom made and no stock available if there is no further needs. If just sample testing before the official order and our MOQ, price and other terms are acceptable,we'd love to provide samples.

Message Type
* Message Content
* Name
* Phone
* Email
* CAPTCHA