Audited Supplier
Product Description
Electronics Lab Environmental Temperature Humidity Test Chamber is for testing material heat, cold, dry resistance, humidity resistance.Suitable for electronics, electrical appliances,Communications, instrumentation, vehicles, plastic products, metal, food, chemical,building materials, medical, aerospaceand other products.
The main technical parameters
| Model # | XB-OTS-80 | XB-OTS-150 | XB-OTS-225 | XB-OTS-408 | XB-OTS-800 | XB-OTS-1000 |
| Internal Dimensions ( W x H x D cm) | 40*50*40 | 50*60*50 | 60*75*50 | 80*85*60 | 100*100*80 | 100* 100 *100 |
| Internal Volume (L) | 80L | 150L | 225L | 408L | 800L | 1000L |
| External Dimensions ( W x H x D cm) | 90*143*100 | 100*153*110 | 110*168*110 | 130*178*120 | 150*193*140 | 150*193*160 |
| Appro Weight (Kg) | 190kg | 260kg | 320kg | 420kg | 540kg | 570kg |
| Temperature Range | Temp Range from -70°C to 150°C(180°C) is available on request (A:-20°C B:-40°C C:-60°C D:-70°C ) | |||||
| Humidity Range | 20%~98%R.H.(10%-98%R.H/5%~98%R.H) (5 ~ 10% is available on request) | |||||
| Heat/cooling rate | About 5.0°C/min;about 1.2°C/min (5~10°C/min is a special optional condition ) | |||||
| Temperature humidity analytic accuracy / uniformity | ≤±0.1°C; ≤±0.1%R.H./ ≤±1.0°C; ≤±3.0%R.H.is special optional condition. | |||||
| Temperature humidity control accuracy / fluctuation | ≤ ±1.0°C; ≤±2.0%R.H./ ≤±0.5°C; ≤±2.0%R.H. | |||||
| Inner and outer materials | SUS#304 Stainless steel for inner chamber and Carton Advanced cold plate nano paint for outer. | |||||
| Thermal Insulation Material | Resistant to high temp ,high density,formate chlorine,ethyl acetum foam insulation materials | |||||
| Controller | " HT-900C " South Korea"TEMI" "OYO" Japan's "OYO" Brand optional | |||||
| Refrigerating Unit | Original France"Tecumseh"brand Original Germany "Bitzer" brand | |||||
| Cooling system | Air cooling/single segment compressor(-20°C) ,air and water double segment compressor (-40°C~-70°C) | |||||
| Safety Devices | Fuse switch, compressor overload switch, refrigerant high and low pressure protection switch, super humidity over-temperature protection switch, fuse, failure warning system | |||||
| Parts | Watching window,50mm testing hole,PL internal bulbs,partition plate,dry and wet ball gauze | |||||
| Optional Parts | printer, special port, added shelf, special shelf, PL internal bulbs, dry and wet ball gauze, etc. | |||||
| Power Supply | 1Φ 220VAC±10% 50/60Hz & 3Φ 380VAC±10% 50/60Hz, Specified in order | |||||
Features:
1.*High texture appearance, the body adopted an arc shape, surface matte stripes processing,
and flat-handle, easy to operate, safe and reliable.
2.*Rectangular multi layer glass View window, the use of guinea pigs observed in the test window witt anti sweat heaters device prevents water gas condensate ,Knot,water droplets,PL fluorescent lamps to keep the inside lighting.
3.*Door bunk isolated airtight packing, can be effectively isolated from the internal temperature of
the leak
4.*With external water supply system, convenient to supplement the cylinder water supply, and automatic recovery using.
5.*Compressor cycling system used France"Tecumseh"brand which can effectively remove condenser pipe and between capillary Lubricating oil and whole series adopt environmental protection
refrigerant (R23, R404, R507)
6.*Controller uses the imported LED display screen, can display measured values and setting time
7.*Controller with multisegment program editor and temperature and humidity can be fast (OUICK) or slope (SLOP) controlled.
8. *Built in mobile wheels allow easy movement and placed and has a strong positioning screw position.
Corresponding standard :
- GB11158 Technical conditions for high-temperature testing box
- GB10589-89 Technical conditions for low-temperature testing box
- GB10592-89 Technical conditions for high and low temperature testing box
- B/T10586-89 technical conditions for humidity testing chamber
- GB/T2423.1-2001 Low-temperature testing methods
- GB/T2423.2-2001 High-temperature testing methods
- B/T2423.3-93 Testing Method for humidity Test Chamber
- GB/T2423.4-93 Alternating hot and humid testing method
- GB/T2423.22-2001temperature testing method
- IEC60068-2-1.1990 low-temperature testing method
- IEC60068-2-2.1974 high-temperature testing method
- GJB150.3 high-temperature testing
- GJB150.4 low-temperature testing
- GJB150.9 humid testing
Calibration & Packing & Shipping
Our Services
We are here to help you. Services available:
Replacement manuals
- Consumables and replacement parts
- On-site maintenance and repair
- Warranty support
- Over-the-phone service support and advice
If you have an OTS chamber , we will do our best to help you in whatever way we can.
Manuals: PDF files of manuals for current models are available free. Please contact us to request a copy. Older and printed copies at additional charge.
- Service repair: We prefer you contact us direct at the factory with any problems you may be experiencing. We help diagnose the problem, arrange for any needed parts, and schedule a technician to do the repairs. Rarely can a local contractor get all that done for you as quickly as we can. We also guarantee the work
RFQ:
Q1 : Can you customize the product?
A: Yes, we can customize any products according to requirements.
Q2 : How to choose the most suitable products?
A: Our professional team will give you the best suggestion,just be patiently to tell us the information about the parameters your required.
Q3 : Can you arrange installations and commissioning in our lab?
A: Firstly, for standard chamber we had 3-5 days commissioning before shipping , you just need link power in your lab, then can start to operate
Secondly; we had detailed operation manual with chamber , any problems you can find and solve in it Thirdly, some of customized chambers we should to install and teach your team to operate .
If you want to know more information...
Please leave a message below and click " SEND "
Thanks for your time and attention~
